Hi Rijurekha Sen, On 06/03/2016 06:05 PM, Rijurekha Sen wrote: > Hi, > I compiled the demo according to > https://github.com/skalk/genode/blob/i.MX53_tablet_demo/os/src/server/vmm/imx53/README. > Next to run the demo in the SABRE tablet, I followed the instruction in > http://genode-main.narkive.com/qJXUD6w5/arm-trustzone-demo-in-i-mx53-sabre-tablet. > Created the u-boot.imx using > https://eewiki.net/display/linuxonarm/i.MX53+Quick+Start#i.MX53QuickStart-Bootloader:U-Boot > for the step 2) > 2) sudo dd if=$(U-BOOT-DIR)/u-boot.imx of=/dev/sdb seek=2 bs=512 conv=fsync > > But when I put in the MMC card in the tablet with the SD card in it and > restart the tablet, it just powers on to the default Android which it came > with. How to get the u-boot prompt, as mentioned in step 4)? > 4) After power up the tablet, U-BOOT prompt (u-boot from MMC is not used), I > did as follows: MX53-SMD U-Boot > ext2load mmc 0:1 0x70800000 image.bin > How to get this u-boot prompt? > > https://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwiFxYaXlozNAhUF7RQKHf9VDWAQFggdMAA&url=https%3A%2F%2Fwww.element14.com%2Fcommunity%2Fservlet%2FJiveServlet%2FdownloadBody%2F49623-102-1-259642%2FFreescale.User_Guide_5.pdf&usg=AFQjCNEmNyxDsrJeUznq6s33mHqfjrerLA&sig2=5aZI5zuWo4sxFal4k4Z_WQ > has a chapter 3 on various boot options. > http://cache.freescale.com/files/32bit/doc/user_guide/IMX53SMDHUG.pdf shows > the location of the switches sw26 and sw28 at the back of the board. Does > that mean, I should open the back cover of the tablet to change these? Is > this what > http://genode-main.narkive.com/qJXUD6w5/arm-trustzone-demo-in-i-mx53-sabre-tablet > did? > > Want to verify the correct thing to do as the tablet is expensive.
exactly, you have to toggle the boot-switches according to Freescales documentation of this board to boot from SD-card instead of internal MMC. You can only access those SW26/28 switches by opening the tablet's case. Regards Stefan > > Thanks! > Riju > > > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e > > > > _______________________________________________ > genode-main mailing list > genode-main@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/genode-main > -- Stefan Kalkowski Genode Labs http://www.genode-labs.com/ ยท http://genode.org/ ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
