Hello Martijn, On 03/14/2017 04:31 PM, Martijn Verschoor wrote: > Dear subscribers of the Genode mailinglist, > > After some help by Christian Prochaska I managed to setup AMT SOL on Lenovo > X250. I thought I’d share my experience because there are some pitfalls of > which I was unaware. > > On older systems like the Lenovo X201, you had to enable Legacy Redirection > Mode for SOL to work. Unfortunately for the X250 this option is no longer > available in the AMT <Ctrl-P> boot menu. Instead you can use wsman to set the > ‘ListenerEnabled’ flag of the AMT_RedirectionService to true, and SOL will be > available. > > Please note that you cannot run wsman on the machine that you're trying to > configure. wsman connects to the amt interface of the target machine and the > amt interface is not accessible from the machine itself. > > So, on another machine, make sure you have installed wsman:
As an alternative one can also use the amtc tool [1]. It supports the modification of a very limited number of settings of which SOL is one: $ amtc -M sol=on -d <target machine> Regards, Adrian [1] - https://github.com/schnoddelbotz/amtc/ ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main