Hey Yevgeny.
Am 03.04.2017 um 04:49 schrieb Yevgeny Lavrov:
> Hi,
>
> Thanks for the hints. I managed to solve the sd_card_bench issue.
> I've tried to print out completion state as Martin suggested by making
> the following changes to:
> <genode-dir>/repos/os/src/drivers/sd_card/spec/imx/driver.cc
>
> driver.cc : line 131: error("command timed out irqstat: ",
> Mmio::read<Irqstat>());
>
> And got the following output during run: “[init -> sd_card_bench] Error:
> command timed out irqstat: 0”
> I assumed that Genode is unable to locate the device for some reason,
> and decided to see if the same approach that worked for the UART would
> work here as well.
> Went back to /repos/base/include/spec/imx6/drivers/board_base.h and
> adjusted the SDHC variables to these values:
>
> /* SD host controller */
> SDHC_IRQ = 56,
> SDHC_MMIO_BASE = 0x02198000,
>
> This did the trick and sd_card_bench successfully executed :)
Cool :)
Eventhough, I wonder that you were able to successfully do a reset with
the other parameters. But maybe there is a second controller at
0x02190000 without a card inserted.
Cheers,
Martin
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main
