On Sat, 2005-07-09 at 14:05 +0200, Jonathan Schaeffer wrote: > I didnt' give any news about my configuration problems because of > other probs now solved :) > So, I have something new : > $ cat /proc/scsi/scsi > Attached devices: > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST3160827AS Rev: 3.42 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: USB2.0 Model: CF CardReader Rev: > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi2 Channel: 00 Id: 00 Lun: 01 > Vendor: USB2.0 Model: CBO CardReader Rev: > Type: Direct-Access ANSI SCSI revision: 02 > Is this one card reader or two? They are both on scsi bus 2 channel 0 and Id 0. If they are two different readers see if you can move them to two different Ids. If they are the same physical reader with two different slots then have you enabled multiple Lun support in you scsi subsystem (in the kernel)? That might fix it. -- Tres
-- [email protected] mailing list
