Hi Script attached. I am going to rebuild the kernel anyway. Gavin
On Thu, 2005-12-08 at 11:46 -0500, Billy Holmes wrote: > Brett Johnson wrote: > > As an example, look for your primary hard drive entry (hda, hde, sda etc). > > There should be a similar entry for st0 after it detects the tape drive. > > he could also post a gzip'd copy of his dmesg, or better yet.. provide a > link to it. -- Dr Gavin Seddon School of Pharmacy and Pharmaceutical Sciences University of Manchester Oxford Road, Manchester M13 9PL, U.K.
Bootdata ok (command line is root=/dev/ram0 init=/initramfs-genkernel-x86_64-2.6.14-gentoo-r2 ramdisk=8192 real_root=/dev/hda3 udev) Linux version 2.6.14-gentoo-r2 ([EMAIL PROTECTED]) (gcc version 3.4.3 20041125 (Gentoo 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 Fri Nov 25 12:10:05 GMT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data) BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa4a0 ACPI: RSDT (v001 A M I OEMRSDT 0x11000403 MSFT 0x00000097) @ 0x000000001ffb0000 ACPI: FADT (v001 A M I OEMFACP 0x11000403 MSFT 0x00000097) @ 0x000000001ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x11000403 MSFT 0x00000097) @ 0x000000001ffb0390 ACPI: OEMB (v001 A M I AMI_OEM 0x11000403 MSFT 0x00000097) @ 0x000000001ffc0040 ACPI: DSDT (v001 K1689 K1689110 0x00000110 INTL 0x02002026) @ 0x0000000000000000 No mptable found. On node 0 totalpages: 130895 DMA zone: 3999 pages, LIFO batch:1 Normal zone: 126896 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:12 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:df7c0000) Checking aperture... CPU 0: aperture @ f8000000 size 64 MB Built 1 zonelists Kernel command line: root=/dev/ram0 init=/initramfs-genkernel-x86_64-2.6.14-gentoo-r2 ramdisk=8192 real_root=/dev/hda3 udev Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2399.972 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Memory: 507944k/523968k available (3401k kernel code, 15316k reserved, 1165k data, 208k init) Calibrating delay using timer specific routine.. 4803.70 BogoMIPS (lpj=9607418) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) 64 Processor 3400+ stepping 00 Using local APIC timer interrupts. Detected 12.499 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs... it is NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-083f claimed by ali7101 ACPI Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:02.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to [email protected] cc [EMAIL PROTECTED]) agpgart: Detected AGP bridge 0 Setting up ULi AGP. agpgart: AGP aperture is 64M @ 0xf8000000 PCI-DMA: Disabling IOMMU. pnp: 00:0c: ioport range 0x680-0x6ff has been reserved pnp: 00:0c: ioport range 0x295-0x296 has been reserved PCI: Bridge: 0000:00:01.0 IO window: b000-bfff MEM window: ff400000-ff4fffff PREFETCH window: d6b00000-f6afffff PCI: Bridge: 0000:00:02.0 IO window: c000-cfff MEM window: ff500000-ff5fffff PREFETCH window: 30000000-300fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:02.0 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher JFS: nTxBlock = 3970, nTxLock = 31766 SGI XFS with ACLs, large block/inode numbers, no debug enabled Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=240.00 Mhz, System=200.25 MHz radeonfb: PLL min 20000 max 40000 radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 128x48 radeonfb (0000:01:00.0): ATI Radeon Y` kobject_register failed for radeonfb (-17) Call Trace:<ffffffff80288366>{kobject_register+70} <ffffffff80325ba9>{bus_add_driver+105} <ffffffff803266ea>{driver_register+58} <ffffffff80294ed7>{pci_register_driver+119} <ffffffff805edb0c>{radeonfb_old_init+316} <ffffffff8010c102>{init+178} <ffffffff8010f31e>{child_rip+8} <ffffffff8010c050>{init+0} <ffffffff8010f316>{child_rip+0} ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1]) ibm_acpi: ec object not found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:02:05.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 17 eth0: RealTek RTL8139 at 0xffffc2000003ac00, 00:40:f4:19:ad:8b, IRQ 17 eth0: Identified 8139 chip type 'RTL-8139C' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx input: AT Translated Set 2 keyboard on isa0060/serio0 Probing IDE interface ide0... logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 hda: HDS728080PLAT20, ATA DISK drive Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 st: Version 20050830, fixed bufsize 32768, s/g segs 256 usbmon: debugfs is not available usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: generic_sse generic_sse: 7379.000 MB/sec raid5: using function: generic_sse (7379.000 MB/sec) raid6: int64x1 1993 MB/s raid6: int64x2 2909 MB/s raid6: int64x4 2999 MB/s raid6: int64x8 2100 MB/s raid6: sse2x1 1393 MB/s raid6: sse2x2 2281 MB/s raid6: sse2x4 3081 MB/s raid6: using algorithm sse2x4 (3081 MB/s) md: raid6 personality registered as nr 8 md: multipath personality registered as nr 7 md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 4, 65536 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff8051d620(lo) IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0xa (1300 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV) powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x6 (1400 mV) powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x2 (1500 mV) cpu_init done, current fid 0x10, vid 0x2 ACPI wakeup devices: HTT PS2K PS2M UAR1 AC97 MC97 LAN USB0 USB1 USB2 UB20 ACPI: (supports S0 S1 S3 S4 S5) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 208k freed ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 18 ehci_hcd 0000:00:0f.3: EHCI Host Controller ehci_hcd 0000:00:0f.3: debug port 1 ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0f.3: irq 18, io mem 0xff6fe800 ehci_hcd 0000:00:0f.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver USB Universal Host Controller Interface driver v2.3 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 19 ohci_hcd 0000:00:0f.0: OHCI Host Controller ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0f.0: irq 19, io mem 0xff6fd000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:0f.1[B] -> GSI 21 (level, low) -> IRQ 20 ohci_hcd 0000:00:0f.1: OHCI Host Controller ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:0f.1: irq 20, io mem 0xff6fc000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 22 (level, low) -> IRQ 21 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:0f.2: irq 21, io mem 0xff6fb000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance libata version 1.12 loaded. ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3 kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 506036k swap on /dev/hda2. Priority:-1 extents:1 across:506036k EXT3 FS on hda3, internal journal ALI15X3: IDE controller at PCI slot 0000:00:0e.0 ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 22 ALI15X3: chipset revision 199 ALI15X3: not 100% native mode: will probe irqs later ALI15X3: port 0x01f0 already claimed by ide0 ALI15X3: port 0x0170 already claimed by ide1 ALI15X3: neither IDE port enabled (BIOS) parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 vmmon: module license 'unspecified' taints kernel. /dev/vmmon[9836]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[9836]: Module vmmon: initialized /dev/vmnet: open called by PID 9887 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 9909 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened eth0: no IPv6 routers present /dev/vmnet: open called by PID 10747 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 10748 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.17.0 20050311 on minor 0: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode [drm] Loading R200 Microcode /dev/vmnet: open called by PID 10773 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 10777 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened vmnet1: no IPv6 routers present vmnet8: no IPv6 routers present
