Mario A Wojcik <[EMAIL PROTECTED]> posted [EMAIL PROTECTED], excerpted below, on Sat, 01 Jul 2006 22:42:20 -0300:
> Hello. > Sorry by my english! > I am trying to install gentoo from stage1, and when initiating my > equipment, amd64 with mother asus, chipset via and serial ATA disc > western digital of 80gb, profit not to do fdisk because I do not have > /dev/xxx aiming a this. You may do as you wish, but you know stage-1 is discouraged, correct? A stage-3 install is recommended, and after an emerge --emptytree world, you end up at the same place anyway. That should not be your problem here, however, as you would still need to fdisk. > It already reviews everything and profit not to cause that it works. > 1. - The serial ATA disc Places as in the bios (nonraid) Good. > 2. - Treatment to use it like scsi, but does not appear to me > /dev/sdxx (single /dev/hdd that is the reader) This would be the problem. It should be /dev/sdX. > 3. - It does not appear /dev/hdx either, because law that podria to > take /dev/hde > 4. - It tries to load by hand module sata_via, but it does not do > anything (it must be because already this loaded according to dmesg) > 5. - it deals with acpi=off with equal result. > Chipset is a route vt8251 Some of You podria to help me, really > not that but to prove (already the books were burned to me) You need to find someone with that chipset to help, if possible. What is your specific motherboard/mainboard? Someone may have it. If not, we can at least check the manufacturer's web site for it and hopefully get all the specifications, chipset, but more also. -- Duncan - List replies preferred. No HTML msgs. "Every nonfree program has a lord, a master -- and if you use the program, he is your master." Richard Stallman -- [email protected] mailing list
