Hi,
I have just encountered this issue and what to know if this is normal
behavior.
1. Installed the Highpoint RocketRaid 2320 (fake raid)
2. Created some JBOD drives
3. Installed the card drivers
4. Make ext3 filesystem on the drives
5. mount the drives.
6. load some data to the drives
Upto here everything is fine. Now comes the funny part.
7. shutdown the server
8. move the drive to sata ports on the ICH7 chip
9. get an error on the motherboard bios
10. gentoo linuxs starts up but the drive cannot be seen on /proc/partitions
I thought my motherboard has a problem.
11. So inserted the drive into an external case with firewire.
12. Connected it to a Mac and it sees it as 2TB drive when it is only a
500G drive
13. tried to format the drive on the Mac but failed
Any ideas where I when wrong?
P.V.Anthony
--
[EMAIL PROTECTED] mailing list
