I've created and ebuild 1.1-r1 using the 1.1 but removing the gentoo.patch line inside it ( cause i saw in changelog, that is this one that correct the driver issue..). Can this way be ok? Thanks Luca
Alle 19:38, martedì 02 maggio 2006, Chris Gianelloni ha scritto: > On Tue, 2006-05-02 at 14:54 +0000, Luca Casagrande wrote: > > Thanks for your answer Andrew... > > I made some test using the live cd 2006 and i noticed that the same > > card is recognized, but the driver is set to VESA. Is there a way to > > have this feature also on my LIVE? > > Use hwsetup 1.0 instead of 1.1, as I "fixed" it in 1.1 to use the > correct driver. The 1.0 hwsetup wasn't "fixed" in any way. Either > that, or you can revert my recent changes in the tree by pullign an > older revision of the hwsetup-1.1-gentoo.patch file from our viewcvs and > replacing the one in your snapshot. > > This is actually an area that I've been testing on fairly recently, so > I'm not reverting it in the tree, but rather trying to fix it properly. > > > Bye > > Luca > > > > On 5/2/06, Andrew Gaffney <[EMAIL PROTECTED]> wrote: > > > > Luca Casagrande wrote: > > > Hi folks.. > > > I have menaged to run my livedistro on some pc (all with > > > > nvidia cards), and it > > > > > works very fine. The problem is when the autoconfig script > > > > detect a VIA > > > > > Graphic card, and x-setup set via as graphic driver: xorg > > > > doesn't start. > > > > > If i change it to vesa, all is working fine. > > > How can i solve this? > > > > Determine *why* X won't start, and then submit a patch for > > x-setup to configure > > X properly :) > > > > -- > > Andrew Gaffney > > http://dev.gentoo.org/~agaffney/ > > Gentoo Linux Developer > > Installer Project > > > > -- > > [EMAIL PROTECTED] mailing list -- "E' molto più bello sapere qualcosa di tutto, che tutto di una cosa (Blaise Pascal)." jabber: [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list
