Alle 18:18, lunedì 07 agosto 2006, Andrew Gaffney ha scritto: > Luca Casagrande wrote: > >> You are missing the important things that people are telling you. Unless > >> you are using the snapshot that corresponds to the 2006.0 stage3, you > >> shouldn't be using it as a seed for livecd-stage1. Instead, you should > >> be building your own stage 1, 2, and 3. > > > > I have created a snapshot using my portage and the snapshot_template.spec > > and catalyst have put this inside /var/tmp/catalyst/snapshots > > > >> Use your snapshot and the 2006.0 stage3 as a seed for your stage1. Then > >> use the resulting stage3 as a seed for the livecd-stage1. > > > > I am lost :( .. the resulting of my snapshot and the 2006.0 stage3 > > should be a stage1. How can i get the stage3 needed for livecd-stage1? > > I said it above. You need to build your own stage 1, 2, and 3. After you > build a stage1, you build a stage2 from the stage1, and then a stage3 from > the stage2. Building stages is the easiest part of catalyst. The specs > files are dead simple and only a few lines long. >
Ok Andrew, thanks for your help..Right now catalyst is creating stage1 and then i'll do the same for stage2 and stage3. Hope this mails will help newbie like me! Thanks Luca -- "Chiunque può simpatizzare col dolore di un amico, ma solo chi ha un animo nobile riesce a simpatizzare col successo di un amico (Oscar Wilde)" LINUX User #411601 jabber: [EMAIL PROTECTED] -- [EMAIL PROTECTED] mailing list
