commit: 4c0977021bf6397fb0f95b764e25f4386781f8b1
Author: Tim Harder <radhermit <AT> gentoo <DOT> org>
AuthorDate: Fri Sep 23 20:15:07 2016 +0000
Commit: Tim Harder <radhermit <AT> gentoo <DOT> org>
CommitDate: Fri Sep 23 20:15:07 2016 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4c097702
net-im/bitlbee: remove old
net-im/bitlbee/bitlbee-3.4.2.ebuild | 189 ------------------------------------
net-im/bitlbee/files/bitlbee.confd | 2 -
net-im/bitlbee/files/bitlbee.initd | 28 ------
3 files changed, 219 deletions(-)
diff --git a/net-im/bitlbee/bitlbee-3.4.2.ebuild
b/net-im/bitlbee/bitlbee-3.4.2.ebuild
deleted file mode 100644
index 8a75327..00000000
--- a/net-im/bitlbee/bitlbee-3.4.2.ebuild
+++ /dev/null
@@ -1,189 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-PYTHON_COMPAT=( python2_7 )
-
-inherit eutils multilib user python-single-r1 systemd
-
-if [[ ${PV} == "9999" ]]; then
- EGIT_REPO_URI="https://github.com/bitlbee/bitlbee.git";
- inherit git-r3
-else
- SRC_URI="http://get.bitlbee.org/src/${P}.tar.gz";
- KEYWORDS="~amd64 ~ppc ~ppc64 ~x86 ~x86-fbsd"
-fi
-
-DESCRIPTION="irc to IM gateway that support multiple IM protocols"
-HOMEPAGE="http://www.bitlbee.org/";
-
-LICENSE="GPL-2"
-SLOT="0"
-IUSE="debug gnutls ipv6 +xmpp libevent msn nss +oscar otr +plugins purple
selinux
- skype ssl test twitter +yahoo xinetd libressl"
-
-COMMON_DEPEND="
- >=dev-libs/glib-2.16
- purple? ( net-im/pidgin )
- libevent? ( dev-libs/libevent:= )
- otr? ( >=net-libs/libotr-4 )
- gnutls? ( net-libs/gnutls:= )
- !gnutls? (
- nss? ( dev-libs/nss )
- !nss? ( ssl? ( !libressl? ( dev-libs/openssl:0= ) libressl? (
dev-libs/libressl:= ) ) )
- )
- "
-DEPEND="${COMMON_DEPEND}
- dev-lang/python
- virtual/pkgconfig
- selinux? ( sec-policy/selinux-bitlbee )
- test? ( dev-libs/check )"
-
-RDEPEND="${COMMON_DEPEND}
- virtual/logger
- skype? (
- dev-python/skype4py[${PYTHON_USEDEP}]
- net-im/skype
- )
- xinetd? ( sys-apps/xinetd )"
-
-REQUIRED_USE="|| ( purple xmpp msn oscar yahoo )
- msn? ( || ( gnutls nss ssl ) )
- xmpp? ( !nss )"
-
-pkg_setup() {
- if use xmpp && ! use gnutls && ! use ssl ; then
- einfo
- elog "You have enabled support for Jabber but do not have SSL"
- elog "support enabled. This *will* prevent bitlbee from being"
- elog "able to connect to SSL enabled Jabber servers. If you
need to"
- elog "connect to Jabber over SSL, enable ONE of the following
use"
- elog "flags: gnutls or ssl"
- einfo
- fi
-
- use skype && python-single-r1_pkg_setup
-
- enewgroup bitlbee
- enewuser bitlbee -1 -1 /var/lib/bitlbee bitlbee
-}
-
-src_prepare() {
- sed -i \
- -e "s@/usr/local/sbin/bitlbee@/usr/sbin/bitlbee@" \
- -e "s/nobody/bitlbee/" \
- -e "s/}/ disable = yes\n}/" \
- doc/bitlbee.xinetd || die "sed failed in xinetd"
-
- sed -i \
- -e "s@mozilla-nss@nss@g" \
- configure || die "sed failed in configure"
-
- use skype && python_fix_shebang protocols/skype/skyped.py
-
- [[ ${PV} != "9999" ]] && epatch
"${FILESDIR}"/${PN}-3.2.1-configure.patch
- epatch_user
-}
-
-src_configure() {
- # setup plugins, protocol, ipv6 and debug
- use xmpp && myconf="${myconf} --jabber=1"
- for flag in debug ipv6 msn oscar plugins purple skype twitter yahoo ; do
- if use ${flag} ; then
- myconf="${myconf} --${flag}=1"
- else
- myconf="${myconf} --${flag}=0"
- fi
- done
-
- # set otr
- if use otr && use plugins ; then
- myconf="${myconf} --otr=plugin"
- else
- if use otr ; then
- ewarn "OTR support has been disabled automatically
because it"
- ewarn "requires the plugins USE flag."
- fi
- myconf="${myconf} --otr=0"
- fi
-
- # setup ssl use flags
- if use gnutls ; then
- myconf="${myconf} --ssl=gnutls"
- einfo "Using gnutls for SSL support"
- elif use ssl ; then
- myconf="${myconf} --ssl=openssl"
- einfo "Using openssl for SSL support"
- elif use nss ; then
- myconf="${myconf} --ssl=nss"
- einfo "Using nss for SSL support"
- else
- myconf="${myconf} --ssl=bogus"
- einfo "You will not have any encryption support enabled."
- fi
-
- # set event handler
- if use libevent ; then
- myconf="${myconf} --events=libevent"
- else
- myconf="${myconf} --events=glib"
- fi
-
- # NOTE: bitlbee's configure script is not an autotool creation,
- # so that is why we don't use econf.
- ./configure \
- --prefix="${EPREFIX}/usr" \
- --datadir="${EPREFIX}/usr/share/bitlbee" \
- --etcdir="${EPREFIX}/etc/bitlbee" \
- --plugindir="${EPREFIX}/usr/$(get_libdir)/bitlbee" \
- --systemdsystemunitdir=$(systemd_get_unitdir) \
- --doc=1 --strip=0 ${myconf} || die "econf failed"
-
- sed -i \
- -e "/^EFLAGS/s:=:&${LDFLAGS} :" \
- Makefile.settings || die "sed failed"
-}
-
-src_install() {
- emake install install-etc install-doc install-dev install-systemd
DESTDIR="${D}"
-
- keepdir /var/lib/bitlbee
- fperms 700 /var/lib/bitlbee
- fowners bitlbee:bitlbee /var/lib/bitlbee
-
- dodoc doc/{AUTHORS,CHANGES,CREDITS,FAQ,README}
-
- if use skype ; then
- newdoc protocols/skype/NEWS NEWS-skype
- newdoc protocols/skype/README README-skype
- fi
-
- if use xinetd ; then
- insinto /etc/xinetd.d
- newins doc/bitlbee.xinetd bitlbee
- fi
-
- newinitd "${FILESDIR}"/bitlbee.initd-r1 bitlbee
- newconfd "${FILESDIR}"/bitlbee.confd-r1 bitlbee
-
- exeinto /usr/share/bitlbee
- doexe utils/{convert_purple.py,bitlbee-ctl.pl}
-}
-
-pkg_postinst() {
- chown -R bitlbee:bitlbee "${ROOT}"/var/lib/bitlbee
- [[ -d "${ROOT}"/var/run/bitlbee ]] &&
- chown -R bitlbee:bitlbee "${ROOT}"/var/run/bitlbee
-
- if [[ -z ${REPLACING_VERSIONS} ]]; then
- einfo
- elog "The bitlbee init script will now attempt to stop all
processes owned by the"
- elog "bitlbee user, including per-client forks."
- elog
- elog "Tell the init script not to touch anything besides the
main bitlbee process"
- elog "by changing the BITLBEE_STOP_ALL variable in"
- elog " /etc/conf.d/bitlbee"
- einfo
- fi
-}
diff --git a/net-im/bitlbee/files/bitlbee.confd
b/net-im/bitlbee/files/bitlbee.confd
deleted file mode 100644
index c4003ce..00000000
--- a/net-im/bitlbee/files/bitlbee.confd
+++ /dev/null
@@ -1,2 +0,0 @@
-#Bitlbee options (see /usr/sbin/bitlbee -h)
-BITLBEE_OPTS="-F"
diff --git a/net-im/bitlbee/files/bitlbee.initd
b/net-im/bitlbee/files/bitlbee.initd
deleted file mode 100644
index c1310be..00000000
--- a/net-im/bitlbee/files/bitlbee.initd
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2 or
-# later
-# $Id$
-
-DAEMON=/usr/sbin/bitlbee
-PIDFILE=/var/run/bitlbee/bitlbee.pid
-
-depend() {
- need logger net
-}
-
-start () {
- ebegin "Starting bitlbee"
- checkpath -d -m 0755 -o bitlbee:bitlbee `dirname ${PIDFILE}`
- start-stop-daemon --start --quiet \
- -u bitlbee:bitlbee --exec ${DAEMON} -- -P ${PIDFILE} \
- ${BITLBEE_OPTS}
- eend $?
-}
-
-stop() {
- ebegin "Stopping bitlbee"
- start-stop-daemon --stop --quiet --pidfile ${PIDFILE}
- eend $?
-}
-
