commit: e5b791770c0d2cf7c278923f6ebc88515f568679
Author: Andreas K. Hüttel <dilfridge <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 20 19:46:38 2017 +0000
Commit: Andreas Hüttel <dilfridge <AT> gentoo <DOT> org>
CommitDate: Fri Oct 20 20:14:43 2017 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e5b79177
sci-libs/linux-gpib: Remove old
Package-Manager: Portage-2.3.11, Repoman-2.3.3
sci-libs/linux-gpib/Manifest | 2 -
sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild | 216 ------------------------
sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild | 215 -----------------------
3 files changed, 433 deletions(-)
diff --git a/sci-libs/linux-gpib/Manifest b/sci-libs/linux-gpib/Manifest
index 7e70088e0e4..5ca16ee8dd5 100644
--- a/sci-libs/linux-gpib/Manifest
+++ b/sci-libs/linux-gpib/Manifest
@@ -1,4 +1,2 @@
DIST gpib_firmware-2006-11-12.tar.gz 169357 SHA256
98380a8d12e6e34dccc0c1d82b48ed796c0c0f5571107d6a685524560aa8d701 SHA512
164d6fcfb3af43933f0a16645276f7d527a7aa24ef311f6ae3dcd7f45c41f92c855cf221bc946772f43fc2f9524057abc34bbd7d805c89b33ed7e111bc6870af
WHIRLPOOL
44506c9d03e746f5bc88f9a2f20e07879a4c4c72f52a5dae97accb381f8ac7f5b5c0cf5c58d1045b18ed6cbda20549a1fdb7e5ab0151a1081da1ec798c683e67
-DIST linux-gpib-4.0.3.tar.gz 1311963 SHA256
6af5113978d179d2f281f5d779f235935371bdfbb15c6c7ca848bca5c3f17c4a SHA512
6eb65cae5220d3c7ca607eed5a641e8a68b422d0e76a787e767d3bffd0695672d5137d44a097483176e933ded5eb376ff57e3a61cddd62aceaa43192218c9cfe
WHIRLPOOL
f0df699fbdaa7d77abd114c8fef1b6ff3aacd67cc233a68f78b0db67b30baeab615beff89861ed47a70216e1fe0d73c518050f80c9d70d0c8199b2b159e068a1
-DIST linux-gpib-4.0.4rc3.tar.gz 1276866 SHA256
437c58fe9f1dc37a7dae7378821dcb7709b30de3701a92d3c67d63867f2ced3f SHA512
915db5c41b613706053b431aec5d0c3d1f309e8a949842f18ee011614fa126ee464c6d5d46744d10a4ae85a73bb7489280d25dddbf7724b0d5e32f65eae67829
WHIRLPOOL
f492694b709aba1e06fc3d45c4c266e73230a4e494fb9ff64dec91ab25142b3a2c96546a4cc226718c236e57d4961cbdfa7ebb14d7867986de4ca05f91c6c9b3
DIST linux-gpib-4.1.0.tar.gz 1529480 SHA256
4cdd7f38e5b02aa6efe27745dae0e21084dbe3ff90b576fc0867be87a1791e26 SHA512
037ed9e484a83caccb15d2d142eef6f1eec356ae972480ca7a676a318d3e9f844fc1911c1b30869b4bb14ef0b4cd10587a803426df9145966bafe22ca7316bd8
WHIRLPOOL
598f66281577034c842d137015e03364a988f8e752901a0de87d26b3a9d50dc54cf73a4543880c846781e9613336794aeb0c28a7018b0046a45d358395fb94e9
diff --git a/sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild
b/sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild
deleted file mode 100644
index 8e7b27438b4..00000000000
--- a/sci-libs/linux-gpib/linux-gpib-4.0.3-r1.ebuild
+++ /dev/null
@@ -1,216 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit linux-info readme.gentoo-r1 versionator eutils linux-mod autotools
perl-functions python-single-r1 toolchain-funcs udev user
-
-MY_PV=${PV/_/}
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/";
-SRC_URI="mirror://sourceforge/linux-gpib/${PN}-${MY_PV}.tar.gz
- firmware? (
http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )
-"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~x86"
-IUSE="isa pcmcia static debug guile perl php python tcl doc firmware"
-
-COMMONDEPEND="
- tcl? ( dev-lang/tcl:0= )
- guile? ( dev-scheme/guile:12 )
- perl? ( dev-lang/perl:= )
- php? ( dev-lang/php:= )
- python? ( ${PYTHON_DEPS} )
- firmware? ( sys-apps/fxload )"
-RDEPEND="${COMMONDEPEND}"
-DEPEND="${COMMONDEPEND}
- virtual/pkgconfig
- doc? ( app-text/docbook-sgml-utils )
- perl? ( virtual/perl-ExtUtils-MakeMaker )"
-
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-3.2.21-build.patch
- "${FILESDIR}"/${PN}-3.2.16-perl.patch
- "${FILESDIR}"/${PN}-4.0.3-reallydie.patch
-)
-
-S=${WORKDIR}/${PN}-${MY_PV}
-
-pkg_setup () {
- use perl && perl_set_version
- use python && python_setup
-
- CONFIG_CHECK="!VMAP_STACK"
- linux-mod_pkg_setup
-
- if kernel_is -lt 2 6 8; then
- die "Kernel versions older than 2.6.8 are not supported."
- fi
-
- #
https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940
- if use pcmcia && kernel_is -ge 2 6 38; then
- die "pcmcia support is broken on kernels newer 2.6.38"
- fi
-}
-
-src_prepare () {
- default
- kernel_is ge 4 11 0 && eapply
"${FILESDIR}"/${PN}-4.0.4_rc2-kernel-4.11.0.patch
- eautoreconf
-}
-
-src_configure() {
- set_arch_to_kernel
- econf \
- $(use_enable isa) \
- $(use_enable pcmcia) \
- $(use_enable static) \
- $(use_enable debug driver-debug) \
- $(use_enable guile guile-binding) \
- $(use_enable perl perl-binding) \
- $(use_enable php php-binding) \
- $(use_enable python python-binding) \
- $(use_enable tcl tcl-binding) \
- $(use_enable doc documentation) \
- --with-linux-srcdir=${KV_DIR}
-}
-
-src_compile() {
- set_arch_to_kernel
- FIRM_DIR=/usr/share/usb
- emake \
- DESTDIR="${D}" \
- INSTALL_MOD_PATH="${D}" \
- HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
- UDEV_RULES_DIR="${D}$(get_udevdir)"/rules.d \
- USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html
-}
-
-src_install() {
- set_arch_to_kernel
- FIRM_DIR=/usr/share/usb
- emake \
- DESTDIR="${D}" \
- INSTALL_MOD_PATH="${D}" \
- HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
- UDEV_RULES_DIR="${D}/$(get_udevdir)"/rules.d \
- USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html install
-
- if use perl; then
- einfo "Installing perl module"
- cd "${S}"/language/perl || die
- DESTDIR=${D} emake install
- perl_fix_packlist
- perl_delete_emptybsdir
- cd "${S}" || die
- fi
-
- echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >>
99-gpib.rules
- udev_dorules 99-gpib.rules
-
- dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
- insinto /etc
- newins util/templates/gpib.conf gpib.conf
- newins util/templates/gpib.conf gpib.conf.example
-
- if use pcmcia; then
- dodir /etc/pcmcia
- insinto /etc/pcmcia
- doins "${S}"/etc/pcmcia/*
- fi
-
- if use firmware; then
- insinto "${FIRM_DIR}"/agilent_82357a
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/*
-
- insinto "${FIRM_DIR}"/ni_gpib_usb_b
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
- insinto /usr/share/linux-gpib/hp_82341
- # do not install precompiled generate_firmware
- doins
"${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README}
- fi
-
- # fix rules files
- local f
- find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f
; do
- grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary
path, fixing."
- sed -i -e "s:${D}:/:g" "${f}"
- done
-
- DOC_CONTENTS="
-You need to run the 'gpib_config' utility to setup the driver before
-you can use it. In order to do it automatically you can add to your
-start script something like this (supposing the appropriate driver
-is loaded on the startup):
-\n
- gpib_config --minor 0
-\n
-To give a user access to the computer's gpib board you will have to add
-them to the group 'gpib' or, you could change the permissions on the device
-files /dev/gpib[0-15] to something you like better, using 'chmod'
-\n
-Edit /etc/gpib.conf to match your interface board, and any devices you wish
-to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for
-more information.
-\n
-"
-
- if use pcmcia; then
- DOC_CONTENTS+='
-For PCMCIA cards:\n
-All files needed for a PCMCIA board were copied to /etc/pcmcia.
-You may wish to edit the options passed to the gpib_config call in the
-/etc/pcmcia/linux-gpib-pcmcia script.
-You may need to send a SIGHUP signal to the cardmgr daemon to force it
-to reload the files in /etc/pcmcia \(alternatively you could use your
-pcmcia init.d script to restart the cardmgr, or you could just reboot\).
-The driver module will be loaded as needed by the cardmgr.
-
-'
- fi
-
- if use firmware; then
- DOC_CONTENTS+='
-For Agilent \(HP\) 82341C and 82341D cards:
-The firmware for these boards is uploaded by passing the appropriate
-firmware file from /usr/share/linux-gpib/hp_82341 directory to
-gpib_config using the -I or --init-data command line option. Example:\n
-gpib_config --minor 0 --init-data
/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin
-'
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_preinst () {
- linux-mod_pkg_preinst
- use perl && perl_set_version
- enewgroup gpib
-}
-
-pkg_postinst () {
- linux-mod_pkg_postinst
- readme.gentoo_print_elog
-
- local v
- for v in ${REPLACING_VERSIONS}; do
- if ! version_is_at_least 3.2.21-r1 ${v}; then
- ewarn "sci-libs/linux-gpib-3.2.21-r1 introduces
incompatible changes to the kernel"
- ewarn "interface. You may need to reboot to make sure
the newly built driver modules"
- ewarn "are used (some of the driver modules cannot be
unloaded)."
- ewarn "If you do not do this, every gpib call will just
result in an error message."
- break
- fi
- done
-}
diff --git a/sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild
b/sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild
deleted file mode 100644
index 16db1db6608..00000000000
--- a/sci-libs/linux-gpib/linux-gpib-4.0.4_rc3.ebuild
+++ /dev/null
@@ -1,215 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python2_7 )
-
-inherit linux-info readme.gentoo-r1 versionator eutils linux-mod autotools
perl-functions python-single-r1 toolchain-funcs udev user
-
-MY_PV=${PV/_/}
-
-DESCRIPTION="Kernel module and driver library for GPIB (IEEE 488.2) hardware"
-HOMEPAGE="http://linux-gpib.sourceforge.net/";
-SRC_URI="mirror://sourceforge/linux-gpib/${PN}-${MY_PV}.tar.gz
- firmware? (
http://linux-gpib.sourceforge.net/firmware/gpib_firmware-2006-11-12.tar.gz )
-"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~x86"
-IUSE="isa pcmcia static debug guile perl php python tcl doc firmware"
-
-COMMONDEPEND="
- tcl? ( dev-lang/tcl:0= )
- guile? ( dev-scheme/guile:12 )
- perl? ( dev-lang/perl:= )
- php? ( dev-lang/php:= )
- python? ( ${PYTHON_DEPS} )
- firmware? ( sys-apps/fxload )"
-RDEPEND="${COMMONDEPEND}"
-DEPEND="${COMMONDEPEND}
- virtual/pkgconfig
- doc? ( app-text/docbook-sgml-utils )
- perl? ( virtual/perl-ExtUtils-MakeMaker )"
-
-REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-3.2.21-build.patch
- "${FILESDIR}"/${PN}-3.2.16-perl.patch
- "${FILESDIR}"/${PN}-4.0.3-reallydie.patch
-)
-
-S=${WORKDIR}/${PN}-${MY_PV}
-
-pkg_setup () {
- use perl && perl_set_version
- use python && python_setup
-
- linux-mod_pkg_setup
-
- if kernel_is -lt 2 6 8; then
- die "Kernel versions older than 2.6.8 are not supported."
- fi
-
- #
https://sourceforge.net/tracker/?func=detail&aid=3285657&group_id=42378&atid=432940
- if use pcmcia && kernel_is -ge 2 6 38; then
- die "pcmcia support is broken on kernels newer 2.6.38"
- fi
-}
-
-src_prepare () {
- default
- kernel_is ge 4 11 0 && eapply
"${FILESDIR}"/${PN}-4.0.4_rc2-kernel-4.11.0.patch
- eautoreconf
-}
-
-src_configure() {
- set_arch_to_kernel
- econf \
- $(use_enable isa) \
- $(use_enable pcmcia) \
- $(use_enable static) \
- $(use_enable debug driver-debug) \
- $(use_enable guile guile-binding) \
- $(use_enable perl perl-binding) \
- $(use_enable php php-binding) \
- $(use_enable python python-binding) \
- $(use_enable tcl tcl-binding) \
- $(use_enable doc documentation) \
- --with-linux-srcdir=${KV_DIR}
-}
-
-src_compile() {
- set_arch_to_kernel
- FIRM_DIR=/usr/share/usb
- emake \
- DESTDIR="${D}" \
- INSTALL_MOD_PATH="${D}" \
- HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
- UDEV_RULES_DIR="${D}$(get_udevdir)"/rules.d \
- USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html
-}
-
-src_install() {
- set_arch_to_kernel
- FIRM_DIR=/usr/share/usb
- emake \
- DESTDIR="${D}" \
- INSTALL_MOD_PATH="${D}" \
- HOTPLUG_USB_CONF_DIR="${D}"/etc/hotplug/usb \
- UDEV_RULES_DIR="${D}/$(get_udevdir)"/rules.d \
- USB_FIRMWARE_DIR="${D}"${FIRM_DIR} \
- docdir=/usr/share/doc/${PF}/html install
-
- if use perl; then
- einfo "Installing perl module"
- cd "${S}"/language/perl || die
- DESTDIR=${D} emake install
- perl_fix_packlist
- perl_delete_emptybsdir
- cd "${S}" || die
- fi
-
- echo "KERNEL==\"gpib[0-9]*\", MODE=\"0660\", GROUP=\"gpib\"" >>
99-gpib.rules
- udev_dorules 99-gpib.rules
-
- dodoc doc/linux-gpib.pdf ChangeLog AUTHORS README* NEWS
-
- insinto /etc
- newins util/templates/gpib.conf gpib.conf
- newins util/templates/gpib.conf gpib.conf.example
-
- if use pcmcia; then
- dodir /etc/pcmcia
- insinto /etc/pcmcia
- doins "${S}"/etc/pcmcia/*
- fi
-
- if use firmware; then
- insinto "${FIRM_DIR}"/agilent_82357a
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/agilent_82357a/*
-
- insinto "${FIRM_DIR}"/ni_gpib_usb_b
- doins "${WORKDIR}"/gpib_firmware-2006-11-12/ni_gpib_usb_b/*
-
- insinto /usr/share/linux-gpib/hp_82341
- # do not install precompiled generate_firmware
- doins
"${WORKDIR}"/gpib_firmware-2006-11-12/hp_82341/{*.bin,README}
- fi
-
- # fix rules files
- local f
- find "${D}$(get_udevdir)"/rules.d -type f -print0 | while read -rd '' f
; do
- grep -q "${D}" "${f}" && einfo "File ${f} contains a temporary
path, fixing."
- sed -i -e "s:${D}:/:g" "${f}"
- done
-
- DOC_CONTENTS="
-You need to run the 'gpib_config' utility to setup the driver before
-you can use it. In order to do it automatically you can add to your
-start script something like this (supposing the appropriate driver
-is loaded on the startup):
-\n
- gpib_config --minor 0
-\n
-To give a user access to the computer's gpib board you will have to add
-them to the group 'gpib' or, you could change the permissions on the device
-files /dev/gpib[0-15] to something you like better, using 'chmod'
-\n
-Edit /etc/gpib.conf to match your interface board, and any devices you wish
-to open via ibfind(). See the documentation in /usr/share/linux-gpib/html for
-more information.
-\n
-"
-
- if use pcmcia; then
- DOC_CONTENTS+='
-For PCMCIA cards:\n
-All files needed for a PCMCIA board were copied to /etc/pcmcia.
-You may wish to edit the options passed to the gpib_config call in the
-/etc/pcmcia/linux-gpib-pcmcia script.
-You may need to send a SIGHUP signal to the cardmgr daemon to force it
-to reload the files in /etc/pcmcia \(alternatively you could use your
-pcmcia init.d script to restart the cardmgr, or you could just reboot\).
-The driver module will be loaded as needed by the cardmgr.
-
-'
- fi
-
- if use firmware; then
- DOC_CONTENTS+='
-For Agilent \(HP\) 82341C and 82341D cards:
-The firmware for these boards is uploaded by passing the appropriate
-firmware file from /usr/share/linux-gpib/hp_82341 directory to
-gpib_config using the -I or --init-data command line option. Example:\n
-gpib_config --minor 0 --init-data
/usr/share/linux-gpib/hp_82341/hp_82341c_fw.bin
-'
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_preinst () {
- linux-mod_pkg_preinst
- use perl && perl_set_version
- enewgroup gpib
-}
-
-pkg_postinst () {
- linux-mod_pkg_postinst
- readme.gentoo_print_elog
-
- local v
- for v in ${REPLACING_VERSIONS}; do
- if ! version_is_at_least 3.2.21-r1 ${v}; then
- ewarn "sci-libs/linux-gpib-3.2.21-r1 introduces
incompatible changes to the kernel"
- ewarn "interface. You may need to reboot to make sure
the newly built driver modules"
- ewarn "are used (some of the driver modules cannot be
unloaded)."
- ewarn "If you do not do this, every gpib call will just
result in an error message."
- break
- fi
- done
-}
