commit: e1a53ba1274bd2838c1b865c08da86a42ddafb2c Author: Zero_Chaos <zerochaos <AT> gentoo <DOT> org> AuthorDate: Mon Oct 23 02:16:41 2017 +0000 Commit: Richard Farina <zerochaos <AT> gentoo <DOT> org> CommitDate: Mon Oct 23 02:16:41 2017 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=e1a53ba1
net-wireless/hostapd: remove vulnerable 2.6 closes bug #634438 Package-Manager: Portage-2.3.11, Repoman-2.3.3 net-wireless/hostapd/hostapd-2.6.ebuild | 217 -------------------------------- 1 file changed, 217 deletions(-) diff --git a/net-wireless/hostapd/hostapd-2.6.ebuild b/net-wireless/hostapd/hostapd-2.6.ebuild deleted file mode 100644 index deae4e47f99..00000000000 --- a/net-wireless/hostapd/hostapd-2.6.ebuild +++ /dev/null @@ -1,217 +0,0 @@ -# Copyright 1999-2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI="6" - -inherit toolchain-funcs eutils systemd - -# bogus commit to force manifest regeneration #596462 - -DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon" -HOMEPAGE="http://hostap.epitest.fi"; -SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"; - -LICENSE="|| ( GPL-2 BSD )" -SLOT="0" -KEYWORDS="amd64 ~arm ~mips ppc x86" -IUSE="ipv6 logwatch netlink sqlite +ssl +wps +crda" - -DEPEND="ssl? ( dev-libs/openssl:*[-bindist] ) - kernel_linux? ( - dev-libs/libnl:3 - crda? ( net-wireless/crda ) - ) - netlink? ( net-libs/libnfnetlink ) - sqlite? ( >=dev-db/sqlite-3 )" - -RDEPEND="${DEPEND}" - -S="${S}/${PN}" - -src_prepare() { - # Allow users to apply patches to src/drivers for example, - # i.e. anything outside ${S}/${PN} - pushd ../ >/dev/null || die - default - popd >/dev/null || die - - sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \ - "${S}/hostapd.conf" || die -} - -src_configure() { - local CONFIG="${S}/.config" - - # toolchain setup - echo "CC = $(tc-getCC)" > ${CONFIG} - - # EAP authentication methods - echo "CONFIG_EAP=y" >> ${CONFIG} - echo "CONFIG_ERP=y" >> ${CONFIG} - echo "CONFIG_EAP_MD5=y" >> ${CONFIG} - - if use ssl; then - # SSL authentication methods - echo "CONFIG_EAP_FAST=y" >> ${CONFIG} - echo "CONFIG_EAP_TLS=y" >> ${CONFIG} - echo "CONFIG_EAP_TTLS=y" >> ${CONFIG} - echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG} - echo "CONFIG_EAP_PEAP=y" >> ${CONFIG} - echo "CONFIG_TLSV11=y" >> ${CONFIG} - echo "CONFIG_TLSV12=y" >> ${CONFIG} - fi - - if use wps; then - # Enable Wi-Fi Protected Setup - echo "CONFIG_WPS=y" >> ${CONFIG} - echo "CONFIG_WPS2=y" >> ${CONFIG} - echo "CONFIG_WPS_UPNP=y" >> ${CONFIG} - echo "CONFIG_WPS_NFC=y" >> ${CONFIG} - einfo "Enabling Wi-Fi Protected Setup support" - fi - - echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG} - echo "CONFIG_EAP_TNC=y" >> ${CONFIG} - echo "CONFIG_EAP_GTC=y" >> ${CONFIG} - echo "CONFIG_EAP_SIM=y" >> ${CONFIG} - echo "CONFIG_EAP_AKA=y" >> ${CONFIG} - echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG} - echo "CONFIG_EAP_EKE=y" >> ${CONFIG} - echo "CONFIG_EAP_PAX=y" >> ${CONFIG} - echo "CONFIG_EAP_PSK=y" >> ${CONFIG} - echo "CONFIG_EAP_SAKE=y" >> ${CONFIG} - echo "CONFIG_EAP_GPSK=y" >> ${CONFIG} - echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG} - echo "CONFIG_EAP_PWD=y" >> ${CONFIG} - - einfo "Enabling drivers: " - - # drivers - echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG} - einfo " HostAP driver enabled" - echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG} - einfo " Wired driver enabled" - echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG} - einfo " Prism54 driver enabled" - echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG} - einfo " None driver enabled" - - einfo " nl80211 driver enabled" - echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG} - - # epoll - echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG} - - # misc - echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG} - echo "CONFIG_PKCS12=y" >> ${CONFIG} - echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG} - echo "CONFIG_IAPP=y" >> ${CONFIG} - echo "CONFIG_IEEE80211R=y" >> ${CONFIG} - echo "CONFIG_IEEE80211W=y" >> ${CONFIG} - echo "CONFIG_IEEE80211N=y" >> ${CONFIG} - echo "CONFIG_IEEE80211AC=y" >> ${CONFIG} - echo "CONFIG_PEERKEY=y" >> ${CONFIG} - echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG} - echo "CONFIG_INTERWORKING=y" >> ${CONFIG} - echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG} - echo "CONFIG_HS20=y" >> ${CONFIG} - echo "CONFIG_WNM=y" >> ${CONFIG} - echo "CONFIG_FST=y" >> ${CONFIG} - echo "CONFIG_FST_TEST=y" >> ${CONFIG} - echo "CONFIG_ACS=y" >> ${CONFIG} - - if use netlink; then - # Netlink support - echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG} - fi - - if use ipv6; then - # IPv6 support - echo "CONFIG_IPV6=y" >> ${CONFIG} - fi - - if use sqlite; then - # Sqlite support - echo "CONFIG_SQLITE=y" >> ${CONFIG} - fi - - # If we are using libnl 2.0 and above, enable support for it - # Removed for now, since the 3.2 version is broken, and we don't - # support it. - if has_version ">=dev-libs/libnl-3.2"; then - echo "CONFIG_LIBNL32=y" >> .config - fi - - # TODO: Add support for BSD drivers - - default_src_configure -} - -src_compile() { - emake V=1 - - if use ssl; then - emake V=1 nt_password_hash - emake V=1 hlr_auc_gw - fi -} - -src_install() { - insinto /etc/${PN} - doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk} - - fperms -R 600 /etc/${PN} - - dosbin ${PN} - dobin ${PN}_cli - - use ssl && dobin nt_password_hash hlr_auc_gw - - newinitd "${FILESDIR}"/${PN}-init.d ${PN} - newconfd "${FILESDIR}"/${PN}-conf.d ${PN} - systemd_dounit "${FILESDIR}"/${PN}.service - - doman ${PN}{.8,_cli.1} - - dodoc ChangeLog README - use wps && dodoc README-WPS - - docinto examples - dodoc wired.conf - - if use logwatch; then - insinto /etc/log.d/conf/services/ - doins logwatch/${PN}.conf - - exeinto /etc/log.d/scripts/services/ - doexe logwatch/${PN} - fi -} - -pkg_postinst() { - einfo - einfo "If you are running openRC you need to follow this instructions:" - einfo "In order to use ${PN} you need to set up your wireless card" - einfo "for master mode in /etc/conf.d/net and then start" - einfo "/etc/init.d/${PN}." - einfo - einfo "Example configuration:" - einfo - einfo "config_wlan0=( \"192.168.1.1/24\" )" - einfo "channel_wlan0=\"6\"" - einfo "essid_wlan0=\"test\"" - einfo "mode_wlan0=\"master\"" - einfo - #if [ -e "${KV_DIR}"/net/mac80211 ]; then - # einfo "This package now compiles against the headers installed by" - # einfo "the kernel source for the mac80211 driver. You should " - # einfo "re-emerge ${PN} after upgrading your kernel source." - #fi - - if use wps; then - einfo "You have enabled Wi-Fi Protected Setup support, please" - einfo "read the README-WPS file in /usr/share/doc/${P}" - einfo "for info on how to use WPS" - fi -}
