aidecoe 14/07/18 07:54:18
Modified: ChangeLog
Added: dracut-038.ebuild
Log:
Version bump.
NEWS
~~~~
- "rd.cmdline=ask" will ask the user on the console to enter additional
kernel command line parameters
- "rd.hostonly=0" removes all "hostonly" added custom files, which is useful
in combination with "rd.auto" or other specific parameters, if you want to
boot on the same hardware, but the compiled in configuration does not match
your setup anymore
- inst* functions and dracut-install now accept the "-H" flag, which logs all
installed files to /lib/dracut/hostonly-files. This is used to remove those
files, if rd.hostonly is given on the kernel command line
- strstr now only does literal string match, please use strglob and strglobin
for globs
- fixed unpacking of the microcode image on shutdown
- added systemd-gpt-auto-generator
- fcoe: wait for lldpad to be ready
- network: handle "ip=dhcp6"
- network: DCHPv6: set valid_lft and preferred_lft
- dm: support dm-cache
- fstab: do not mount and fsck from fstab if using systemd
- break at switch_root only for bare rd.break and not for any rd.break=...
- nbd: make use of "--systemd-mark", otherwise it gets killed on switch_root
- fcoe-uefi: fixed cmdline parameter generation
- iscsi: deprecate "ip=ibft", use "rd.iscsi.ibft[=1]" from now on
- "lsinitrd -m" now only lists the dracut modules of the image
- a lot of small bugfixes
(Portage version: 2.2.10/cvs/Linux x86_64, signed Manifest commit with key
F0134531E1DBFAB5)
Revision Changes Path
1.169 sys-kernel/dracut/ChangeLog
file :
http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-kernel/dracut/ChangeLog?rev=1.169&view=markup
plain:
http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-kernel/dracut/ChangeLog?rev=1.169&content-type=text/plain
diff :
http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-kernel/dracut/ChangeLog?r1=1.168&r2=1.169
Index: ChangeLog
===================================================================
RCS file: /var/cvsroot/gentoo-x86/sys-kernel/dracut/ChangeLog,v
retrieving revision 1.168
retrieving revision 1.169
diff -u -r1.168 -r1.169
--- ChangeLog 12 Jun 2014 18:47:17 -0000 1.168
+++ ChangeLog 18 Jul 2014 07:54:18 -0000 1.169
@@ -1,6 +1,43 @@
# ChangeLog for sys-kernel/dracut
# Copyright 1999-2014 Gentoo Foundation; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/sys-kernel/dracut/ChangeLog,v 1.168
2014/06/12 18:47:17 aidecoe Exp $
+# $Header: /var/cvsroot/gentoo-x86/sys-kernel/dracut/ChangeLog,v 1.169
2014/07/18 07:54:18 aidecoe Exp $
+
+*dracut-038 (18 Jul 2014)
+
+ 18 Jul 2014; Amadeusz Żołnowski <[email protected]> +dracut-038.ebuild,
+ +files/038-0001-dracut-functions.sh-support-for-altern.patch,
+ +files/038-0002-gentoo.conf-let-udevdir-be-handled-by-.patch,
+ +files/038-0003-Use-the-same-paths-in-dracut.sh-as-tho.patch,
+ +files/038-0004-Install-dracut-install-into-libexec-di.patch,
+ +files/038-0005-modsign-do-not-hardcode-path-to-keyctl.patch:
+ Version bump.
+
+ NEWS
+ ~~~~
+ - "rd.cmdline=ask" will ask the user on the console to enter additional
+ kernel command line parameters
+ - "rd.hostonly=0" removes all "hostonly" added custom files, which is useful
+ in combination with "rd.auto" or other specific parameters, if you want to
+ boot on the same hardware, but the compiled in configuration does not match
+ your setup anymore
+ - inst* functions and dracut-install now accept the "-H" flag, which logs all
+ installed files to /lib/dracut/hostonly-files. This is used to remove those
+ files, if rd.hostonly is given on the kernel command line
+ - strstr now only does literal string match, please use strglob and strglobin
+ for globs
+ - fixed unpacking of the microcode image on shutdown
+ - added systemd-gpt-auto-generator
+ - fcoe: wait for lldpad to be ready
+ - network: handle "ip=dhcp6"
+ - network: DCHPv6: set valid_lft and preferred_lft
+ - dm: support dm-cache
+ - fstab: do not mount and fsck from fstab if using systemd
+ - break at switch_root only for bare rd.break and not for any rd.break=...
+ - nbd: make use of "--systemd-mark", otherwise it gets killed on switch_root
+ - fcoe-uefi: fixed cmdline parameter generation
+ - iscsi: deprecate "ip=ibft", use "rd.iscsi.ibft[=1]" from now on
+ - "lsinitrd -m" now only lists the dracut modules of the image
+ - a lot of small bugfixes
*dracut-037-r3 (12 Jun 2014)
1.1 sys-kernel/dracut/dracut-038.ebuild
file :
http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-kernel/dracut/dracut-038.ebuild?rev=1.1&view=markup
plain:
http://sources.gentoo.org/viewvc.cgi/gentoo-x86/sys-kernel/dracut/dracut-038.ebuild?rev=1.1&content-type=text/plain
Index: dracut-038.ebuild
===================================================================
# Copyright 1999-2014 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/sys-kernel/dracut/dracut-038.ebuild,v 1.1
2014/07/18 07:54:18 aidecoe Exp $
EAPI=4
inherit bash-completion-r1 eutils linux-info multilib systemd
DESCRIPTION="Generic initramfs generation tool"
HOMEPAGE="http://dracut.wiki.kernel.org";
SRC_URI="mirror://kernel/linux/utils/boot/${PN}/${P}.tar.xz"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~alpha ~amd64 ~arm ~ia64 ~ppc ~ppc64 ~sparc ~x86"
IUSE="debug selinux systemd"
RESTRICT="test"
CDEPEND="virtual/udev
systemd? ( >=sys-apps/systemd-199 )
selinux? ( sec-policy/selinux-dracut )
"
RDEPEND="${CDEPEND}
app-arch/cpio
>=app-shells/bash-4.0
>sys-apps/kmod-5[tools]
|| ( >=sys-apps/sysvinit-2.87-r3 sys-apps/systemd-sysv-utils )
>=sys-apps/util-linux-2.21
debug? ( dev-util/strace )
selinux? ( sys-libs/libselinux sys-libs/libsepol )
"
DEPEND="${CDEPEND}
app-text/asciidoc
>=dev-libs/libxslt-1.1.26
app-text/docbook-xml-dtd:4.5
>=app-text/docbook-xsl-stylesheets-1.75.2
virtual/pkgconfig
"
DOCS=( AUTHORS HACKING NEWS README README.generic README.kernel README.modules
README.testsuite TODO )
MY_LIBDIR=/usr/lib
PATCHES=(
"${FILESDIR}/${PV}-0001-dracut-functions.sh-support-for-altern.patch"
"${FILESDIR}/${PV}-0002-gentoo.conf-let-udevdir-be-handled-by-.patch"
"${FILESDIR}/${PV}-0003-Use-the-same-paths-in-dracut.sh-as-tho.patch"
"${FILESDIR}/${PV}-0004-Install-dracut-install-into-libexec-di.patch"
"${FILESDIR}/${PV}-0005-modsign-do-not-hardcode-path-to-keyctl.patch"
)
#
# Helper functions
#
# Removes module from modules.d.
# $1 = module name
# Module name can be specified without number prefix.
rm_module() {
local force m
[[ $1 = -f ]] && force=-f
for m in $@; do
if [[ $m =~ ^[0-9][0-9][^\ ]*$ ]]; then
rm ${force} --interactive=never -r "${modules_dir}"/$m
else
rm ${force} --interactive=never -r
"${modules_dir}"/[0-9][0-9]$m
fi
done
}
# Grabbed from net-misc/netctl ebuild.
optfeature() {
local desc=$1
shift
while (( $# )); do
if has_version "$1"; then
elog " [I] $1 to ${desc}"
else
elog " [ ] $1 to ${desc}"
fi
shift
done
}
#
# ebuild functions
#
src_prepare() {
epatch "${PATCHES[@]}"
local libdirs="/$(get_libdir) /usr/$(get_libdir)"
if [[ ${SYMLINK_LIB} = yes ]]; then
# Preserve lib -> lib64 symlinks in initramfs
[[ $libdirs =~ /lib\ ]] || libdirs+=" /lib /usr/lib"
fi
einfo "Setting libdirs to \"${libdirs}\" ..."
sed -e "3alibdirs=\"${libdirs}\"" \
-i "${S}/dracut.conf.d/gentoo.conf.example" || die
local udevdir="$("$(tc-getPKG_CONFIG)" udev --variable=udevdir)"
einfo "Setting udevdir to ${udevdir}..."
sed -r -e "s|^(udevdir=).*$|\1${udevdir}|" \
-i "${S}/dracut.conf.d/gentoo.conf.example" || die
if use systemd; then
local systemdutildir="$(systemd_get_utildir)"
local systemdsystemunitdir="$(systemd_get_unitdir)"
local systemdsystemconfdir="$("$(tc-getPKG_CONFIG)" systemd \
--variable=systemdsystemconfdir)"
[[ ${systemdsystemconfdir} ]] \
|| systemdsystemconfdir=/etc/systemd/system
einfo "Setting systemdutildir to ${systemdutildir} and ..."
sed -e "5asystemdutildir=\"${systemdutildir}\"" \
-i "${S}/dracut.conf.d/gentoo.conf.example" || die
einfo "Setting systemdsystemunitdir to ${systemdsystemunitdir}
and..."
sed -e "6asystemdsystemunitdir=\"${systemdsystemunitdir}\"" \
-i "${S}/dracut.conf.d/gentoo.conf.example" || die
einfo "Setting systemdsystemconfdir to
${systemdsystemconfdir}..."
sed -e "7asystemdsystemconfdir=\"${systemdsystemconfdir}\"" \
-i "${S}/dracut.conf.d/gentoo.conf.example" || die
else
local systemdutildir="/lib/systemd"
einfo "Setting systemdutildir for standalone udev to" \
"${systemdutildir}..."
sed -e "5asystemdutildir=\"${systemdutildir}\"" \
-i "${S}/dracut.conf.d/gentoo.conf.example" || die
fi
epatch_user
}
src_configure() {
local myconf="--libdir=${MY_LIBDIR}"
myconf+=" --bashcompletiondir=$(get_bashcompdir)"
if use systemd; then
myconf+=" --systemdsystemunitdir='$(systemd_get_unitdir)'"
fi
econf ${myconf}
}
src_compile() {
tc-export CC
emake doc install/dracut-install
}
src_install() {
default
local my_libdir="${MY_LIBDIR}"
local dracutlibdir="${my_libdir#/}/dracut"
echo "DRACUT_VERSION=$PVR" > "${D%/}/${dracutlibdir}/dracut-version.sh"
insinto "${dracutlibdir}/dracut.conf.d/"
newins dracut.conf.d/gentoo.conf.example gentoo.conf
insinto /etc/logrotate.d
newins dracut.logrotate dracut
dodir /var/lib/dracut/overlay
dohtml dracut.html
#
# Modules
#
local module
modules_dir="${D%/}/${dracutlibdir}/modules.d"
use debug || rm_module 95debug
use selinux || rm_module 98selinux
if use systemd; then
# With systemd following modules do not make sense
rm_module 96securityfs 97masterkey 98integrity
else
rm_module 98systemd
# Without systemd following modules do not make sense
rm_module 00systemd-bootchart
fi
# Remove modules which won't work for sure
rm_module 95fcoe # no tools
# fips module depends on masked app-crypt/hmaccalc
rm_module 01fips 02fips-aesni
}
pkg_postinst() {
if linux-info_get_any_version && linux_config_src_exists; then
ewarn ""
ewarn "If the following test report contains a missing kernel"
ewarn "configuration option, you should reconfigure and rebuild
your"
ewarn "kernel before booting image generated with this Dracut
version."
ewarn ""
local CONFIG_CHECK="~BLK_DEV_INITRD ~DEVTMPFS"
# Kernel configuration options descriptions:
local desc_DEVTMPFS="Maintain a devtmpfs filesystem to mount at
/dev"
local desc_BLK_DEV_INITRD="Initial RAM filesystem and RAM disk
"\
"(initramfs/initrd) support"
local opt desc
# Generate ERROR_* variables for check_extra_config.
for opt in ${CONFIG_CHECK}; do
opt=${opt#\~}
desc=desc_${opt}
eval "local ERROR_${opt}='CONFIG_${opt}: \"${!desc}\"" \
"is missing and REQUIRED'"
done
check_extra_config
echo
else
ewarn ""
ewarn "Your kernel configuration couldn't be checked. Do you
have"
ewarn "/usr/src/linux/.config file there? Please check
manually if"
ewarn "following options are enabled:"
ewarn ""
ewarn " CONFIG_BLK_DEV_INITRD"
ewarn " CONFIG_DEVTMPFS"
ewarn ""
fi
elog "To get additional features, a number of optional runtime"
elog "dependencies may be installed:"
elog ""
optfeature "Networking support" net-misc/curl "net-misc/dhcp[client]" \
sys-apps/iproute2
optfeature \
"Measure performance of the boot process for later
visualisation" \
app-benchmarks/bootchart2 sys-apps/usleep sys-process/acct
optfeature "Scan for Btrfs on block devices" sys-fs/btrfs-progs
optfeature "Load kernel modules and drop this privilege for real init" \
sys-libs/libcap
optfeature "Support CIFS" net-fs/cifs-utils
optfeature "Decrypt devices encrypted with cryptsetup/LUKS" \
sys-fs/cryptsetup
optfeature "Support for GPG-encrypted keys for crypt module" \
app-crypt/gnupg
optfeature \
"Allows use of dash instead of default bash (on your own risk)"
\
app-shells/dash
optfeature "Framebuffer splash (media-gfx/splashutils)" \
media-gfx/splashutils
optfeature "Support iSCSI" sys-block/open-iscsi
optfeature "Support Logical Volume Manager" sys-fs/lvm2
optfeature "Support MD devices, also known as software RAID devices" \
sys-fs/mdadm
optfeature "Support Device Mapper multipathing" sys-fs/multipath-tools
optfeature "Plymouth boot splash" '>=sys-boot/plymouth-0.8.5-r5'
optfeature "Support network block devices" sys-block/nbd
optfeature "Support NFS" net-fs/nfs-utils net-nds/rpcbind
optfeature \
"Install ssh and scp along with config files and specified
keys" \
dev-libs/openssl
optfeature "Enable logging with syslog-ng or rsyslog"
app-admin/syslog-ng \
app-admin/rsyslog
}
