commit: 76f01453cc239c92f2ed624c02302a109f371e00 Author: Luke Dashjr <luke-jr+git <AT> utopios <DOT> org> AuthorDate: Wed Jun 27 08:57:05 2018 +0000 Commit: Matthias Maier <tamiko <AT> gentoo <DOT> org> CommitDate: Sun Nov 11 21:12:45 2018 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=76f01453
sys-firmware/seabios: Actually use iasl to rebuild hex files Fixed build to actually use sys-power/iasl (rather than using bundled pre-compiled hex files). Generated hex files do not match, so to be sure, I revbumped the ebuild version. Closes: https://github.com/gentoo/gentoo/pull/9182 Signed-off-by: Luke Dashjr <luke-jr+git <AT> utopios.org> Signed-off-by: Matthias Maier <tamiko <AT> gentoo.org> sys-firmware/seabios/seabios-1.11.0-r1.ebuild | 145 ++++++++++++++++++++++++++ 1 file changed, 145 insertions(+) diff --git a/sys-firmware/seabios/seabios-1.11.0-r1.ebuild b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild new file mode 100644 index 00000000000..ea838ed955e --- /dev/null +++ b/sys-firmware/seabios/seabios-1.11.0-r1.ebuild @@ -0,0 +1,145 @@ +# Copyright 1999-2018 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +EAPI="6" + +PYTHON_COMPAT=( python{2_7,3_{4,5,6}} ) + +inherit eutils toolchain-funcs python-any-r1 + +# SeaBIOS maintainers sometimes don't release stable tarballs or stable +# binaries to generate the stable tarball the following is necessary: +# git clone git://git.seabios.org/seabios.git && cd seabios +# git archive --output seabios-${PV}.tar.gz --prefix seabios-${PV}/ rel-${PV} + +if [[ ${PV} == *9999* || -n "${EGIT_COMMIT}" ]] ; then + EGIT_REPO_URI="git://git.seabios.org/seabios.git" + inherit git-r3 +else + KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd" + + # Binary versions taken from fedora: + # http://download.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/x86_64/os/Packages/s/ + # seabios-bin-1.10.2-1.fc27.noarch.rpm + # seavgabios-bin-1.10.2-1.fc27.noarch.rpm + SRC_URI=" + !binary? ( https://code.coreboot.org/p/seabios/downloads/get/${P}.tar.gz ) + binary? ( https://dev.gentoo.org/~tamiko/distfiles/${P}-bin.tar.xz )" +fi + +DESCRIPTION="Open Source implementation of a 16-bit x86 BIOS" +HOMEPAGE="https://www.seabios.org/"; + +LICENSE="LGPL-3 GPL-3" +SLOT="0" +IUSE="+binary debug +seavgabios" + +REQUIRED_USE="debug? ( !binary ) + !amd64? ( !x86? ( binary ) )" + +# The amd64/x86 check is needed to workaround #570892. +SOURCE_DEPEND=" + >=sys-power/iasl-20060912 + ${PYTHON_DEPS}" +DEPEND=" + !binary? ( + amd64? ( ${SOURCE_DEPEND} ) + x86? ( ${SOURCE_DEPEND} ) + )" +RDEPEND="" + +pkg_pretend() { + if ! use binary; then + ewarn "You have decided to compile your own SeaBIOS. This is not" + ewarn "supported by upstream unless you use their recommended" + ewarn "toolchain (which you are not)." + elog + ewarn "If you are intending to use this build with QEMU, realize" + ewarn "you will not receive any support if you have compiled your" + ewarn "own SeaBIOS. Virtual machines subtly fail based on changes" + ewarn "in SeaBIOS." + fi +} + +pkg_setup() { + use binary || python-any-r1_pkg_setup +} + +src_unpack() { + default + + # This simplifies the logic between binary & source builds. + mkdir -p "${S}" +} + +src_prepare() { + default + + # Ensure precompiled iasl files are never used + find "${WORKDIR}" -name '*.hex' -delete || die +} + +src_configure() { + use binary && return + + tc-ld-disable-gold #438058 + + if use debug ; then + echo "CONFIG_DEBUG_LEVEL=8" >.config + fi + _emake config +} + +_emake() { + LANG=C \ + emake V=1 \ + CC="$(tc-getCC)" \ + LD="$(tc-getLD)" \ + AR="$(tc-getAR)" \ + AS="$(tc-getAS)" \ + OBJCOPY="$(tc-getOBJCOPY)" \ + RANLIB="$(tc-getRANLIB)" \ + OBJDUMP="$(tc-getOBJDUMP)" \ + HOST_CC="$(tc-getBUILD_CC)" \ + VERSION="Gentoo/${EGIT_COMMIT:-${PVR}}" \ + "$@" +} + +src_compile() { + use binary && return + + cp "${FILESDIR}/seabios/config.seabios-256k" .config || die + _emake oldnoconfig + _emake iasl + _emake out/bios.bin + mv out/bios.bin ../bios-256k.bin || die + + if use seavgabios ; then + local config t targets=( + cirrus + isavga + qxl + stdvga + virtio + vmware + ) + for t in "${targets[@]}" ; do + emake clean distclean + cp "${FILESDIR}/seavgabios/config.vga-${t}" .config || die + _emake oldnoconfig + _emake out/vgabios.bin + cp out/vgabios.bin ../vgabios-${t}.bin || die + done + fi +} + +src_install() { + insinto /usr/share/seabios + use binary && doins ../bios.bin + doins ../bios-256k.bin + + if use seavgabios ; then + insinto /usr/share/seavgabios + doins ../vgabios*.bin + fi +}
