commit: cebe00b766cd45d163c0adcb43a82b9ee653a7b7 Author: Thomas Sachau <tommy <AT> gentoo <DOT> org> AuthorDate: Sun Dec 15 09:19:03 2019 +0000 Commit: Thomas Sachau <tommy <AT> gentoo <DOT> org> CommitDate: Sun Dec 15 09:19:03 2019 +0000 URL: https://gitweb.gentoo.org/proj/multilib-portage.git/commit/?id=cebe00b7
sys-boot/grub: Drop modified old grub version, no longer in main tree Signed-off-by: Thomas Sachau <tommy <AT> gentoo.org> sys-boot/grub/Manifest | 8 - sys-boot/grub/files/grub.conf.gentoo | 16 -- sys-boot/grub/grub-0.97-r10.ebuild | 290 ----------------------------------- sys-boot/grub/grub-0.97-r14.ebuild | 288 ---------------------------------- sys-boot/grub/metadata.xml | 12 -- 5 files changed, 614 deletions(-) diff --git a/sys-boot/grub/Manifest b/sys-boot/grub/Manifest deleted file mode 100644 index 706a01bc3..000000000 --- a/sys-boot/grub/Manifest +++ /dev/null @@ -1,8 +0,0 @@ -AUX grub.conf.gentoo 591 SHA256 e656b5716d6a5904a035960b460494431d8c1327df51fcd9ffb39243425fe142 SHA512 23036b9e558b604082d9ae8c848f18ea552181416937e3ef62287e53c38086b8d7ffef0e67d04af04f05f5b23c6da7aaf1f1f23e0ee1cffd5dbd5320e8648cb1 WHIRLPOOL 184284cac00bc039d36c5b2f8d7be0f425e75ba904c4c04c2ec531a094cd191c42cb7382276e73a5d176e1661dcdd1bdc5e3806b9d7abe9b38563575ecb6ee76 -DIST grub-0.97-patches-1.12.tar.bz2 55811 SHA256 80cedf74d29e334182d8fb906035d2c365b96b6e8a09bbe800f44f98c828ac97 -DIST grub-0.97-patches-1.14.tar.bz2 52916 SHA256 5c7ca31fd9b2123471daf2e46a1936c4044ad0c12e353d9d3d8c3f83a1c7a0e5 SHA512 d9a8d420fd5a36f181ca608f9b70be90f9d82cee66c8484636fda5085290586071b5d9379d917e8141b993ffc4777859cd02971c916d6167dca6f50d83282c26 WHIRLPOOL 60abd5087e85d9969784b9f5a100934606a76da03b665533d9d4d1d13f4e2d15de233a71e67a32d18a5fbfe128c2c8bf04c0d4451de24e6ca4fbd8dd862e23ea -DIST grub-0.97.tar.gz 971783 SHA256 4e1d15d12dbd3e9208111d6b806ad5a9857ca8850c47877d36575b904559260b SHA512 c2bc9ffc8583aeae71cee9ddcc4418969768d4e3764d47307da54f93981c0109fb07d84b061b3a3628bd00ba4d14a54742bc04848110eb3ae8ca25dbfbaabadb WHIRLPOOL 0ad7f5dc035e2a3ad5fd29b6388f06fd12a8cc694117b4cbd42b5302433aa522db23566222d35219fe17fb95edb5090553156198507f70208eda5d858fd52dd5 -DIST splash.xpm.gz 33856 SHA256 b95600f777331b0dd31d51c68f60f0e846e4c8b628857a41165f4e6b30e6acaf SHA512 5ae1f786f7d46a95a7061068d5b2b3ad64607c7b190d6f28379508c5dce67e26308325bfd637542a84855dfcf1ea3d143947326fdb189a6a8972208d3ead23da WHIRLPOOL d95b7b588ea8ac7c2c8c53eb8057aef21c825da6411afe3b7e864c606aeffaaebce8ae41ce3e979f277bd6b48a9e82a1f2ea8afc836213b56523d8a854227d7b -EBUILD grub-0.97-r10.ebuild 9400 SHA256 2fa87730cb24815067906705aca056a899dd48f42623127abc0bb736a54c769a SHA512 a33fba52bdea688dc7c483b3130aa547dc2284d30c62e67e19d81dab45f8ce21300eefa7d594149535d2ce3113776a39bce258ba5c070d0ac43c62da170ffdf5 WHIRLPOOL 994c6a7653d7fc1ec5e1658ca7e0306e1a9b689914df5b4a977399af4c9cbeac834251510566715eb2f48e44810966e16eb82b5a7d1aee888f6d15a5bb3a8914 -EBUILD grub-0.97-r14.ebuild 9203 SHA256 3e7ff7cfb1602577ed23788f2267b4f8aeb168cbd392813e3bcbea0dfc047200 SHA512 5a321126ff9d30551f5ea7ab22dc318e8c1b77a10d855268504762a1c0f5f1e1a0e2f119c837b37b4b16e5f33fd322840d8bdf37943d1a778bc0983c76464f0a WHIRLPOOL 69af838a47fae54ab17c6a0791a2c8f40913493f899d908b04bb4a8e428942c9d35c3e380f654b15b13591c376bc8cd33cebe133da65b6844364b03cef29f771 -MISC metadata.xml 342 SHA256 af2c5801517ebc9cd93377058185f6ec448c036703e6ba189d7afd86f61b8e47 SHA512 bb1798fe58a844d43cf3051e1e27bdbf51bb6a7229f594fd249efe36e1e675d49f05ce94206d80acecddec0efd4a9b64f6bf34d287164980afb81c7c082edec9 WHIRLPOOL c5fe35fb98ea7bab573bde308e8251134a960c394a609afaa4b7334d70f7671e15c22ae0636f51bc090706cace4162a67a107ab7b90dc555c7c45901e37742c9 diff --git a/sys-boot/grub/files/grub.conf.gentoo b/sys-boot/grub/files/grub.conf.gentoo deleted file mode 100644 index 984470b38..000000000 --- a/sys-boot/grub/files/grub.conf.gentoo +++ /dev/null @@ -1,16 +0,0 @@ -# This is a sample grub.conf for use with Genkernel, per the Gentoo handbook -# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#doc_chap2 -# If you are not using Genkernel and you need help creating this file, you -# should consult the handbook. Alternatively, consult the grub.conf.sample that -# is included with the Grub documentation. - -default 0 -timeout 30 -#splashimage=(hd0,0)/boot/grub/splash.xpm.gz - -#title Gentoo Linux 3.8.13 -#root (hd0,0) -#kernel /boot/kernel-genkernel-x86-3.8.13-gentoo root=/dev/sda3 -#initrd /boot/initramfs-genkernel-x86-3.8.13 - -# vim:ft=conf: diff --git a/sys-boot/grub/grub-0.97-r10.ebuild b/sys-boot/grub/grub-0.97-r10.ebuild deleted file mode 100644 index 03583f9b0..000000000 --- a/sys-boot/grub/grub-0.97-r10.ebuild +++ /dev/null @@ -1,290 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/grub-0.97-r10.ebuild,v 1.13 2012/02/29 23:09:30 floppym Exp $ - -# XXX: we need to review menu.lst vs grub.conf handling. We've been converting -# all systems to grub.conf (and symlinking menu.lst to grub.conf), but -# we never updated any of the source code (it still all wants menu.lst), -# and there is no indication that upstream is making the transition. - -# If you need to roll a new grub-static distfile, here is how. -# - Robin H. Johnson <robb...@gentoo.org> - 29 Nov 2010 -# USE='static -ncurses -netboot -custom-cflags' \ -# GRUB_STATIC_PACKAGE_BUILDING=1 ebuild \ -# grub-${PVR}.ebuild package && \ -# cp -f ${PKGDIR}/${CAT}/${PF}.tbz2 ${DISTDIR}/grub-static-${PVR}.tar.bz2 - -inherit mount-boot eutils flag-o-matic toolchain-funcs autotools linux-info pax-utils - -PATCHVER="1.12" # Should match the revision ideally -DESCRIPTION="GNU GRUB Legacy boot loader" -HOMEPAGE="http://www.gnu.org/software/grub/"; -SRC_URI="mirror://gentoo/${P}.tar.gz - mirror://gnu-alpha/${PN}/${P}.tar.gz - mirror://gentoo/splash.xpm.gz - mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 x86 ~x86-fbsd" -IUSE="custom-cflags ncurses netboot static" - -RDEPEND="ncurses? ( - >=sys-libs/ncurses-5.2-r5 - )" -DEPEND="${RDEPEND}" - -pkg_setup() { - local arch="$(tc-arch)" - case ${arch} in - amd64) CONFIG_CHECK='~IA32_EMULATION' check_extra_config ;; - esac -} - -src_unpack() { - unpack ${A} - cd "${S}" - - # patch breaks booting for some people #111885 - rm "${WORKDIR}"/patch/400_*reiser4* - - # Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as - # discovered in bug 160801. We can change this, however, using larger values - # for this variable means that Grub needs more memory to run and boot. For a - # kernel of size N, Grub needs (N+1)*2. Advanced users should set a custom - # value in make.conf, it is possible to make kernels ~16Mb in size, but it - # needs the kitchen sink built-in. - local t="custom" - if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then - case $(tc-arch) in - amd64) GRUB_MAX_KERNEL_SIZE=9 ;; - x86) GRUB_MAX_KERNEL_SIZE=5 ;; - esac - t="default" - fi - einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)" - - sed -i \ - -e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \ - "${S}"/grub/asmstub.c \ - || die "Failed to hack memory size" - - if [[ -n ${PATCHVER} ]] ; then - EPATCH_SUFFIX="patch" - epatch "${WORKDIR}"/patch - eautoreconf - fi -} - -src_compile() { - filter-flags -fPIE #168834 - - use amd64 && multilib_toolchain_setup x86 - - unset BLOCK_SIZE #73499 - - ### i686-specific code in the boot loader is a bad idea; disabling to ensure - ### at least some compatibility if the hard drive is moved to an older or - ### incompatible system. - - # grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2, - # but the objcopy's (faulty) test fails if -fstack-protector is default. - # create a cache telling configure that objcopy is ok, and add -C to econf - # to make use of the cache. - # - # CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails. - # STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites - # -fno-stack-protector detected by configure, removed from netboot's emake. - use custom-cflags || unset CFLAGS - - export grub_cv_prog_objcopy_absolute=yes #79734 - use static && append-ldflags -static - - # Per bug 216625, the emul packages do not provide .a libs for performing - # suitable static linking - if use amd64 && use static ; then - if [ -z "${GRUB_STATIC_PACKAGE_BUILDING}" ]; then - die "You must use the grub-static package if you want a static Grub on amd64!" - else - eerror "You have set GRUB_STATIC_PACKAGE_BUILDING. This" - eerror "is specifically intended for building the tarballs for the" - eerror "grub-static package via USE='static -ncurses'." - eerror "All bets are now off." - ebeep 10 - fi - fi - - # build the net-bootable grub first, but only if "netboot" is set - if use netboot ; then - econf \ - --libdir=/lib \ - --datadir=/usr/lib/grub \ - --exec-prefix=/ \ - --disable-auto-linux-mem-opt \ - --enable-diskless \ - --enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \ - --enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \ - --enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \ - --enable-{tulip,via-rhine,w89c840} || die "netboot econf failed" - - emake w89c840_o_CFLAGS="-O" || die "making netboot stuff" - - mv -f stage2/{nbgrub,pxegrub} "${S}"/ - mv -f stage2/stage2 stage2/stage2.netboot - - make clean || die "make clean failed" - fi - - # Now build the regular grub - # Note that FFS and UFS2 support are broken for now - stage1_5 files too big - econf \ - --libdir=/lib \ - --datadir=/usr/lib/grub \ - --exec-prefix=/ \ - --disable-auto-linux-mem-opt \ - $(use_with ncurses curses) \ - || die "econf failed" - - # sanity check due to common failure - use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found" - - emake || die "making regular stuff" -} - -src_test() { - # non-default block size also give false pass/fails. - unset BLOCK_SIZE - make check || die "make check failed" -} - -src_install() { - emake DESTDIR="${D}" install || die - if use netboot ; then - exeinto /usr/lib/grub/${CHOST} - doexe nbgrub pxegrub stage2/stage2.netboot || die "netboot install" - fi - - # bug 330745 - pax-mark -m "${D}"/sbin/grub - - dodoc AUTHORS BUGS ChangeLog NEWS README THANKS TODO - newdoc docs/menu.lst grub.conf.sample - dodoc "${FILESDIR}"/grub.conf.gentoo - prepalldocs - - [ -n "${GRUB_STATIC_PACKAGE_BUILDING}" ] && \ - mv \ - "${D}"/usr/share/doc/${PF} \ - "${D}"/usr/share/doc/grub-static-${PF/grub-} - - insinto /usr/share/grub - doins "${DISTDIR}"/splash.xpm.gz -} - -setup_boot_dir() { - local boot_dir=$1 - local dir=${boot_dir} - - mkdir -p "${dir}" - [[ ! -L ${dir}/boot ]] && ln -s . "${dir}/boot" - dir="${dir}/grub" - if [[ ! -e ${dir} ]] ; then - mkdir "${dir}" || die "${dir} does not exist!" - fi - - # change menu.lst to grub.conf - if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then - mv -f "${dir}"/menu.lst "${dir}"/grub.conf - ewarn - ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf" - ewarn - fi - - if [[ ! -e ${dir}/menu.lst ]]; then - einfo "Linking from new grub.conf name to menu.lst" - ln -snf grub.conf "${dir}"/menu.lst - fi - - if [[ -e ${dir}/stage2 ]] ; then - mv "${dir}"/stage2{,.old} - ewarn "*** IMPORTANT NOTE: you must run grub and install" - ewarn "the new version's stage1 to your MBR. Until you do," - ewarn "stage1 and stage2 will still be the old version, but" - ewarn "later stages will be the new version, which could" - ewarn "cause problems such as an unbootable system." - ewarn "This means you must use either grub-install or perform" - ewarn "root/setup manually! For more help, see the handbook:" - ewarn "http://www.gentoo.org/doc/en/handbook/handbook-${ARCH}.xml?part=1&chap=10#grub-install-auto"; - ebeep - fi - - einfo "Copying files from /lib/grub, /usr/lib/grub and /usr/share/grub to ${dir}" - for x in \ - "${ROOT}"/lib*/grub/*/* \ - "${ROOT}"/usr/lib*/grub/*/* \ - "${ROOT}"/usr/share/grub/* ; do - [[ -f ${x} ]] && cp -p "${x}" "${dir}"/ - done - - if [[ ! -e ${dir}/grub.conf ]] ; then - s="${ROOT}/usr/share/doc/${PF}/grub.conf.gentoo" - [[ -e "${s}" ]] && cat "${s}" >${dir}/grub.conf - [[ -e "${s}.gz" ]] && zcat "${s}.gz" >${dir}/grub.conf - [[ -e "${s}.bz2" ]] && bzcat "${s}.bz2" >${dir}/grub.conf - fi - - # Per bug 218599, we support grub.conf.install for users that want to run a - # specific set of Grub setup commands rather than the default ones. - grub_config=${dir}/grub.conf.install - [[ -e ${grub_config} ]] || grub_config=${dir}/grub.conf - if [[ -e ${grub_config} ]] ; then - egrep \ - -v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \ - "${grub_config}" | \ - /sbin/grub --batch \ - --device-map="${dir}"/device.map \ - > /dev/null - fi - - # the grub default commands silently piss themselves if - # the default file does not exist ahead of time - if [[ ! -e ${dir}/default ]] ; then - grub-set-default --root-directory="${boot_dir}" default - fi - einfo "Grub has been installed to ${boot_dir} successfully." -} - -pkg_postinst() { - mount-boot_mount_boot_partition - - if [[ -n ${DONT_MOUNT_BOOT} ]]; then - elog "WARNING: you have DONT_MOUNT_BOOT in effect, so you must apply" - elog "the following instructions for your /boot!" - elog "Neglecting to do so may cause your system to fail to boot!" - elog - else - setup_boot_dir "${ROOT}"/boot - # Trailing output because if this is run from pkg_postinst, it gets mixed into - # the other output. - einfo "" - fi - elog "To interactively install grub files to another device such as a USB" - elog "stick, just run the following and specify the directory as prompted:" - elog " emerge --config =${PF}" - elog "Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell" - elog "grub where to install in a non-interactive way." - - # needs to be after we call setup_boot_dir - mount-boot_pkg_postinst -} - -pkg_config() { - local dir - if [ ! -d "${GRUB_ALT_INSTALLDIR}" ]; then - einfo "Enter the directory where you want to setup grub:" - read dir - else - dir="${GRUB_ALT_INSTALLDIR}" - fi - setup_boot_dir "${dir}" -} diff --git a/sys-boot/grub/grub-0.97-r14.ebuild b/sys-boot/grub/grub-0.97-r14.ebuild deleted file mode 100644 index e852e7b17..000000000 --- a/sys-boot/grub/grub-0.97-r14.ebuild +++ /dev/null @@ -1,288 +0,0 @@ -# Copyright 1999-2015 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/grub-0.97-r14.ebuild,v 1.8 2015/06/14 20:36:32 ulm Exp $ - -# XXX: we need to review menu.lst vs grub.conf handling. We've been converting -# all systems to grub.conf (and symlinking menu.lst to grub.conf), but -# we never updated any of the source code (it still all wants menu.lst), -# and there is no indication that upstream is making the transition. - -# If you need to roll a new grub-static distfile, here is how. -# - Robin H. Johnson <robb...@gentoo.org> - 29 Nov 2010 -# FEATURES='-noauto -noinfo -nodoc -noman -splitdebug nostrip' \ -# USE='static -ncurses -netboot -custom-cflags' \ -# PORTAGE_COMPRESS=true GRUB_STATIC_PACKAGE_BUILDING=1 ebuild \ -# grub-${PVR}.ebuild clean package && \ -# qtbz2 -s -j ${PKGDIR}/${CAT}/${PF}.tbz2 && \ -# mv ${PF}.tar.bz2 ${DISTDIR}/grub-static-${PVR}.tar.bz2 - -EAPI="4" - -inherit eutils mount-boot toolchain-funcs linux-info flag-o-matic autotools pax-utils multiprocessing - -PATCHVER="1.14" # Should match the revision ideally -DESCRIPTION="GNU GRUB Legacy boot loader" -HOMEPAGE="http://www.gnu.org/software/grub/"; -SRC_URI="mirror://gentoo/${P}.tar.gz - mirror://gnu-alpha/${PN}/${P}.tar.gz - mirror://gentoo/splash.xpm.gz - mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 x86 ~x86-fbsd" -IUSE="custom-cflags ncurses netboot static" - -LIB_DEPEND="ncurses? ( - >=sys-libs/ncurses-5.9-r3[static-libs(+)] - )" -RDEPEND="!static? ( ${LIB_DEPEND//\[static-libs(+)\]/} )" -DEPEND="${RDEPEND} - static? ( ${LIB_DEPEND} )" - -pkg_setup() { - case $(tc-arch) in - amd64) CONFIG_CHECK='~IA32_EMULATION' check_extra_config ;; - esac -} - -src_prepare() { - # Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as - # discovered in bug 160801. We can change this, however, using larger values - # for this variable means that Grub needs more memory to run and boot. For a - # kernel of size N, Grub needs (N+1)*2. Advanced users should set a custom - # value in make.conf, it is possible to make kernels ~16Mb in size, but it - # needs the kitchen sink built-in. - local t="custom" - if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then - case $(tc-arch) in - amd64) GRUB_MAX_KERNEL_SIZE=9 ;; - x86) GRUB_MAX_KERNEL_SIZE=5 ;; - esac - t="default" - fi - einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)" - - sed -i \ - -e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \ - "${S}"/grub/asmstub.c \ - || die - - EPATCH_SUFFIX="patch" epatch "${WORKDIR}"/patch - rm -f "${S}"/aclocal.m4 # seems to keep bug 418287 away - eautoreconf -} - -src_configure() { - filter-flags -fPIE #168834 - - use amd64 && multilib_toolchain_setup x86 - - unset BLOCK_SIZE #73499 - - ### i686-specific code in the boot loader is a bad idea; disabling to ensure - ### at least some compatibility if the hard drive is moved to an older or - ### incompatible system. - - # grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2, - # but the objcopy's (faulty) test fails if -fstack-protector is default. - # create a cache telling configure that objcopy is ok, and add -C to econf - # to make use of the cache. - # - # CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails. - # STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites - # -fno-stack-protector detected by configure, removed from netboot's emake. - use custom-cflags || unset CFLAGS - - tc-ld-disable-gold #439082 #466536 #526348 - - export grub_cv_prog_objcopy_absolute=yes #79734 - use static && append-ldflags -static - - if use amd64 && use static ; then - if [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] ; then - eerror "You have set GRUB_STATIC_PACKAGE_BUILDING. This" - eerror "is specifically intended for building the tarballs for the" - eerror "grub-static package via USE='static -ncurses'." - eerror "All bets are now off." - fi - fi - - multijob_init - - # build the net-bootable grub first, but only if "netboot" is set - if use netboot ; then - ( - multijob_child_init - mkdir -p "${WORKDIR}"/netboot - pushd "${WORKDIR}"/netboot >/dev/null - ECONF_SOURCE=${S} \ - econf \ - --libdir=/lib \ - --datadir=/usr/lib/grub \ - --exec-prefix=/ \ - --disable-auto-linux-mem-opt \ - --enable-diskless \ - --enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \ - --enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \ - --enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \ - --enable-{tulip,via-rhine,w89c840} - popd >/dev/null - ) & - multijob_post_fork - fi - - # Now build the regular grub - # Note that FFS and UFS2 support are broken for now - stage1_5 files too big - econf \ - --libdir=/lib \ - --datadir=/usr/lib/grub \ - --exec-prefix=/ \ - --disable-auto-linux-mem-opt \ - $(use_with ncurses curses) - - # sanity check due to common failure - use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found" - - multijob_finish -} - -src_compile() { - use netboot && emake -C "${WORKDIR}"/netboot w89c840_o_CFLAGS="-O" - emake -} - -src_test() { - # non-default block size also give false pass/fails. - unset BLOCK_SIZE - emake -j1 check -} - -src_install() { - default - if use netboot ; then - exeinto /usr/lib/grub/${CHOST} - doexe "${WORKDIR}"/netboot/stage2/{nbgrub,pxegrub} - newexe "${WORKDIR}"/netboot/stage2/stage2 stage2.netboot - fi - - pax-mark -m "${D}"/sbin/grub #330745 - - newdoc docs/menu.lst grub.conf.sample - dodoc "${FILESDIR}"/grub.conf.gentoo - - [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] && \ - mv "${D}"/usr/share/doc/{${PF},grub-static-${PF/grub-}} - - insinto /usr/share/grub - doins "${DISTDIR}"/splash.xpm.gz -} - -setup_boot_dir() { - local boot_dir=$1 - local dir=${boot_dir} - - mkdir -p "${dir}" - [[ ! -L ${dir}/boot ]] && ln -s . "${dir}/boot" - dir="${dir}/grub" - if [[ ! -e ${dir} ]] ; then - mkdir "${dir}" || die - fi - - # change menu.lst to grub.conf - if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then - mv -f "${dir}"/menu.lst "${dir}"/grub.conf - ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf" - echo - fi - - if [[ ! -e ${dir}/menu.lst ]]; then - einfo "Linking from new grub.conf name to menu.lst" - ln -snf grub.conf "${dir}"/menu.lst - fi - - if [[ -e ${dir}/stage2 ]] ; then - mv "${dir}"/stage2{,.old} - ewarn "*** IMPORTANT NOTE: you must run grub and install" - ewarn "the new version's stage1 to your MBR. Until you do," - ewarn "stage1 and stage2 will still be the old version, but" - ewarn "later stages will be the new version, which could" - ewarn "cause problems such as an unbootable system." - ewarn - ewarn "This means you must use either grub-install or perform" - ewarn "root/setup manually." - ewarn - ewarn "For more help, see the handbook:" - ewarn "http://www.gentoo.org/doc/en/handbook/handbook-${ARCH}.xml?part=1&chap=10#grub-install-auto"; - echo - fi - - einfo "Copying files from /lib/grub and /usr/share/grub to ${dir}" - for x in \ - "${ROOT}"/lib*/grub/*/* \ - "${ROOT}"/usr/share/grub/* ; do - [[ -f ${x} ]] && cp -p "${x}" "${dir}"/ - done - - if [[ ! -e ${dir}/grub.conf ]] ; then - s="${ROOT}/usr/share/doc/${PF}/grub.conf.gentoo" - [[ -e "${s}" ]] && cat "${s}" >${dir}/grub.conf - [[ -e "${s}.gz" ]] && zcat "${s}.gz" >${dir}/grub.conf - [[ -e "${s}.bz2" ]] && bzcat "${s}.bz2" >${dir}/grub.conf - fi - - # Per bug 218599, we support grub.conf.install for users that want to run a - # specific set of Grub setup commands rather than the default ones. - grub_config=${dir}/grub.conf.install - [[ -e ${grub_config} ]] || grub_config=${dir}/grub.conf - if [[ -e ${grub_config} ]] ; then - egrep \ - -v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \ - "${grub_config}" | \ - /sbin/grub --batch \ - --device-map="${dir}"/device.map \ - > /dev/null - fi - - # the grub default commands silently piss themselves if - # the default file does not exist ahead of time - if [[ ! -e ${dir}/default ]] ; then - grub-set-default --root-directory="${boot_dir}" default - fi - einfo "Grub has been installed to ${boot_dir} successfully." -} - -pkg_postinst() { - mount-boot_mount_boot_partition - - if [[ -n ${DONT_MOUNT_BOOT} ]]; then - elog "WARNING: you have DONT_MOUNT_BOOT in effect, so you must apply" - elog "the following instructions for your /boot!" - elog "Neglecting to do so may cause your system to fail to boot!" - elog - else - setup_boot_dir "${ROOT}"/boot - # Trailing output because if this is run from pkg_postinst, it gets mixed into - # the other output. - einfo "" - fi - elog "To interactively install grub files to another device such as a USB" - elog "stick, just run the following and specify the directory as prompted:" - elog " emerge --config =${PF}" - elog "Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell" - elog "grub where to install in a non-interactive way." - - # needs to be after we call setup_boot_dir - mount-boot_pkg_postinst -} - -pkg_config() { - local dir - if [ ! -d "${GRUB_ALT_INSTALLDIR}" ]; then - einfo "Enter the directory where you want to setup grub:" - read dir - else - dir="${GRUB_ALT_INSTALLDIR}" - fi - setup_boot_dir "${dir}" -} diff --git a/sys-boot/grub/metadata.xml b/sys-boot/grub/metadata.xml deleted file mode 100644 index 93f7a8f45..000000000 --- a/sys-boot/grub/metadata.xml +++ /dev/null @@ -1,12 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd";> -<pkgmetadata> - <maintainer> - <email>bi...@gentoo.org</email> - <name>Nathan Phillip Brink</name> - </maintainer> - <maintainer> - <email>to...@gentoo.org</email> - <name>Thomas Sachau</name> - </maintainer> -</pkgmetadata>
