commit: 12b86043ec8d5eb62baab25a8207da93f69cc694 Author: Matthew Thode <prometheanfire <AT> gentoo <DOT> org> AuthorDate: Wed Dec 18 21:06:39 2019 +0000 Commit: Matthew Thode <prometheanfire <AT> gentoo <DOT> org> CommitDate: Wed Dec 18 21:06:39 2019 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=12b86043
sys-auth/nss-pam-ldapd: add py3 support Package-Manager: Portage-2.3.81, Repoman-2.3.20 Signed-off-by: Matthew Thode <prometheanfire <AT> gentoo.org> .../nss-pam-ldapd/nss-pam-ldapd-0.9.11-r1.ebuild | 164 +++++++++++++++++++++ 1 file changed, 164 insertions(+) diff --git a/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.11-r1.ebuild b/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.11-r1.ebuild new file mode 100644 index 00000000000..de0c03ccfe4 --- /dev/null +++ b/sys-auth/nss-pam-ldapd/nss-pam-ldapd-0.9.11-r1.ebuild @@ -0,0 +1,164 @@ +# Copyright 1999-2019 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 + +PYTHON_COMPAT=(python2_7 python3_5 python3_6) +inherit eutils prefix user python-r1 multilib multilib-minimal systemd s6 + +DESCRIPTION="NSS module for name lookups using LDAP" +HOMEPAGE="https://arthurdejong.org/nss-pam-ldapd/"; +SRC_URI="https://arthurdejong.org/${PN}/${P}.tar.gz"; + +LICENSE="LGPL-2.1" +SLOT="0" +KEYWORDS="~amd64 ~x86" +IUSE="debug kerberos +pam pynslcd sasl test +utils" +RESTRICT="!test? ( test )" + +COMMON_DEP=" + net-nds/openldap[${MULTILIB_USEDEP}] + sasl? ( dev-libs/cyrus-sasl[${MULTILIB_USEDEP}] ) + kerberos? ( virtual/krb5[${MULTILIB_USEDEP}] ) + sys-libs/pam[${MULTILIB_USEDEP}] + utils? ( ${PYTHON_DEPS} ) + pynslcd? ( + dev-python/python-ldap[${PYTHON_USEDEP}] + dev-python/python-daemon[${PYTHON_USEDEP}] + ) + !sys-auth/nss_ldap + !sys-auth/pam_ldap" +RDEPEND="${COMMON_DEP}" +DEPEND="${COMMON_DEP} + test? ( + ${PYTHON_DEPS} + dev-python/pylint[${PYTHON_USEDEP}] + ) + sys-devel/automake" + +REQUIRED_USE=" + utils? ( ${PYTHON_REQUIRED_USE} ) + test? ( ${PYTHON_REQUIRED_USE} pynslcd )" + +PATCHES=( + "${FILESDIR}"/${PN}-0.9.4-disable-py3-only-linters.patch + "${FILESDIR}"/${PN}-0.9.11-pynslcd-module-paths.patch +) + +pkg_setup() { + enewgroup nslcd + enewuser nslcd -1 -1 -1 nslcd +} + +src_prepare() { + cp pynslcd/pynslcd.py "${S}" || die "Copying pynslcd failed" + + default + use utils && python_setup + touch pynslcd/__init__.py || die "Could not create __init__.py for pynslcd" +} + +multilib_src_configure() { + local -a myconf + + myconf=( + --disable-utils + --enable-warnings + --with-ldap-lib=openldap + --with-ldap-conf-file=/etc/nslcd.conf + --with-nslcd-pidfile=/run/nslcd/nslcd.pid + --with-nslcd-socket=/run/nslcd/socket + $(usex x86-fbsd '--with-nss-flavour=' '--with-nss-flavour=' 'freebsd' 'glibc') + $(use_enable pynslcd) + $(use_enable debug) + $(use_enable kerberos) + $(use_enable pam) + $(use_enable sasl) + ) + + # nss libraries always go in /lib on Gentoo + if multilib_is_native_abi ; then + myconf+=("--with-pam-seclib-dir=${EPREFIX}/$(get_libdir)/security") + myconf+=("--libdir=${EPREFIX}/$(get_libdir)") + else + myconf+=("--with-pam-seclib-dir=/$(get_libdir)/security") + myconf+=("--libdir=/$(get_libdir)") + fi + + ECONF_SOURCE="${S}" econf "${myconf[@]}" +} + +multilib_src_install_all() { + local script + + newinitd "${FILESDIR}"/nslcd-init-r1 nslcd + newinitd "${FILESDIR}"/nslcd-init-r2 nslcd + s6_install_service nslcd "${FILESDIR}"/nslcd-run-s6 + + insinto /usr/share/nss-pam-ldapd + doins "${WORKDIR}/${P}/nslcd.conf" + + fperms o-r /etc/nslcd.conf + + if use utils; then + python_moduleinto nslcd + python_foreach_impl python_domodule utils/*.py + + for script in chsh getent; do + python_foreach_impl python_newscript utils/${script}.py ${script}.ldap + done + fi + if use pynslcd; then + rm -rf "${D}"/usr/share/pynslcd + python_moduleinto pynslcd + python_foreach_impl python_domodule pynslcd/*.py + python_scriptinto /usr/sbin + python_newscript pynslcd.py pynslcd + newinitd "${FILESDIR}"/pynslcd.initd pynslcd + fi + + systemd_newtmpfilesd "${FILESDIR}"/nslcd-tmpfiles.conf nslcd.conf + systemd_dounit "${FILESDIR}"/nslcd.service +} + +multilib_src_install() { + emake DESTDIR="${D}" install + + if use pynslcd; then + python_moduleinto pynslcd + python_foreach_impl python_domodule pynslcd/*.py + fi +} + +python_test() { + PYTHONPATH="${S}" emake check +} + +multilib_src_test() { + pushd "${BUILD_DIR}" + ln -s ../pynslcd/constants.py utils/constants.py + python_foreach_impl python_test + popd +} + +pkg_postinst() { + echo + elog "For this to work you must configure /etc/nslcd.conf" + elog "This configuration is similar to pam_ldap's /etc/ldap.conf" + echo + elog "In order to use nss-pam-ldapd, nslcd needs to be running. You can" + elog "start it like this:" + elog " # /etc/init.d/nslcd start" + echo + elog "You can add it to the default runlevel like so:" + elog " # rc-update add nslcd default" + elog + elog "If you have >=sys-apps/openrc-0.16.3, you can also use s6" + elog "to supervise this service." + elog "To do this, emerge sys-apps/s6 then add nslcd-s6" + elog "default runlevel instead of nslcd." + elog + elog "If you are upgrading, keep in mind that /etc/nss-ldapd.conf" + elog " is now named /etc/nslcd.conf" + echo +}
