commit: b0b9211bc38fde3d4c92785ed484eca143f529b9 Author: Robin H. Johnson <robbat2 <AT> gentoo <DOT> org> AuthorDate: Wed Sep 9 00:45:10 2020 +0000 Commit: Robin H. Johnson <robbat2 <AT> gentoo <DOT> org> CommitDate: Wed Sep 9 00:47:47 2020 +0000 URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=b0b9211b
sys-block/sas3ircu: cleanup old versions Signed-off-by: Robin H. Johnson <robbat2 <AT> gentoo.org> sys-block/sas3ircu/sas3ircu-14.ebuild | 71 ----------------------------------- sys-block/sas3ircu/sas3ircu-15.ebuild | 71 ----------------------------------- sys-block/sas3ircu/sas3ircu-5.ebuild | 70 ---------------------------------- 3 files changed, 212 deletions(-) diff --git a/sys-block/sas3ircu/sas3ircu-14.ebuild b/sys-block/sas3ircu/sas3ircu-14.ebuild deleted file mode 100644 index a6ab6b69ff2..00000000000 --- a/sys-block/sas3ircu/sas3ircu-14.ebuild +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit mount-boot - -DESCRIPTION="LSI MPT-SAS3 controller management tool" -HOMEPAGE="https://www.broadcom.com/products/storage/host-bus-adapters/sas-9300-8e#downloads"; -LICENSE="LSI" -SLOT="0" -KEYWORDS="-* ~amd64 ~ppc64 ~x86 ~sparc-solaris ~x64-solaris ~x86-solaris" -IUSE="efi doc" -RESTRICT="strip fetch mirror" -DEPEND="" -RDEPEND="" -QA_PREBUILT="opt/lsi/sas3ircu boot/efi/sas3ircu.efi" - -MY_PN=SAS3IRCU -MY_P="${MY_PN}_P${PV}" - -DISTFILE_BIN=${MY_P}.zip -DISTFILE_DOC=SAS3_IR_UG.pdf - -SRC_URI_BASE='https://docs.broadcom.com/docs-and-downloads/host-bus-adapters' -SRC_URI=" - ${SRC_URI_BASE}/host-bus-adapters-common-files/sas_sata_12g_p${PV}/${DISTFILE_BIN} - doc? ( ${SRC_URI_BASE}/${DISTFILE_DOC} )" - -S="${WORKDIR}/${MY_P}" - -pkg_nofetch() { - elog "Broadcom has a mandatory click-through license on thier binaries." - elog "Please visit $HOMEPAGE and download ${DISTFILE_BIN} from the Mangement Software section." - elog "After downloading, move ${MY_P} into your DISTDIR directory" - if use doc; then - elog "Please also download 'SAS-3 Integrated RAID Configuration Utility User Guide' (${DISTFILE_DOC}) " - elog "and also place it into your DISTDIR directory" - fi - einfo $SRC_URI -} - -supportedcards() { - elog "This binary supports should support ALL cards, including, but not" - elog "limited to the following series:" - elog "" - elog "LSI SAS 3004" - elog "LSI SAS 3008" -} - -src_unpack() { - unpack ${DISTFILE_BIN} -} - -src_install() { - exeinto /opt/lsi/ - use amd64 || use x86 && doexe sas3ircu_linux_x86_rel/sas3ircu - use ppc64 && doexe sas3ircu_linux_x86_rel/sas3ircu - use amd64-fbsd && doexe sas3ircu_freebsd_amd64_rel/sas3ircu - use x86-fbsd && doexe sas3ircu_freebsd_i386_rel/sas3ircu - use x64-solaris || use x86-solaris && doexe sas3ircu_solaris_x86_rel/sas3ircu - use sparc-solaris && doexe sas3ircu_solaris_sparc_rel/sas3ircu - if use efi; then - exeinto /boot/efi/ - doexe sas3ircu_udk_uefi__x64_rel/sas3ircu.efi - fi - # The second number is some sort of internal revision that is inconsistent - # between releases. - dodoc IRCU_MPT_GEN3_Phase${PV}.0-*.pdf - dodoc README_SAS3IRCU_P${PV}.txt - use doc && dodoc "${DISTDIR}"/$DISTFILE_DOC -} diff --git a/sys-block/sas3ircu/sas3ircu-15.ebuild b/sys-block/sas3ircu/sas3ircu-15.ebuild deleted file mode 100644 index ad7d44f65f7..00000000000 --- a/sys-block/sas3ircu/sas3ircu-15.ebuild +++ /dev/null @@ -1,71 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit mount-boot - -DESCRIPTION="LSI MPT-SAS3 controller management tool" -HOMEPAGE="https://www.broadcom.com/products/storage/host-bus-adapters/sas-9300-8e#downloads"; -LICENSE="LSI" -SLOT="0" -KEYWORDS="-* ~amd64 ~ppc64 ~x86 ~sparc-solaris ~x64-solaris ~x86-solaris" -IUSE="efi doc" -RESTRICT="strip fetch mirror" -DEPEND="" -RDEPEND="" -QA_PREBUILT="opt/lsi/sas3ircu boot/efi/sas3ircu.efi" - -MY_PN=SAS3IRCU -MY_P="${MY_PN}_P${PV}" - -DISTFILE_BIN=${MY_P}.zip -DISTFILE_DOC=SAS3_IR_UG.pdf - -SRC_URI_BASE='https://docs.broadcom.com/docs-and-downloads/host-bus-adapters' -SRC_URI=" - ${SRC_URI_BASE}/host-bus-adapters-common-files/sas_sata_12g_p${PV}/${DISTFILE_BIN} - doc? ( ${SRC_URI_BASE}/${DISTFILE_DOC} )" - -S="${WORKDIR}/${MY_P}" - -pkg_nofetch() { - elog "Broadcom has a mandatory click-through license on thier binaries." - elog "Please visit $HOMEPAGE and download ${DISTFILE_BIN} from the Mangement Software section." - elog "After downloading, move ${MY_P} into your DISTDIR directory" - if use doc; then - elog "Please also download 'SAS-3 Integrated RAID Configuration Utility User Guide' (${DISTFILE_DOC}) " - elog "and also place it into your DISTDIR directory" - fi - einfo $SRC_URI -} - -supportedcards() { - elog "This binary supports should support ALL cards, including, but not" - elog "limited to the following series:" - elog "" - elog "LSI SAS 3004" - elog "LSI SAS 3008" -} - -src_unpack() { - unpack ${DISTFILE_BIN} -} - -src_install() { - exeinto /opt/lsi/ - use amd64 || use x86 && doexe sas3ircu_rel/sas3ircu/sas3ircu_linux_x64_rel/sas3ircu - use ppc64 && doexe sas3ircu_rel/sas3ircu/sas3ircu_linux_ppc64_rel/sas3ircu - use amd64-fbsd && doexe sas3ircu_rel/sas3ircu/sas3ircu_freebsd_amd64_rel/sas3ircu - use x86-fbsd && doexe sas3ircu_rel/sas3ircu/sas3ircu_freebsd_i386_rel/sas3ircu - use x64-solaris || use x86-solaris && doexe sas3ircu_rel/sas3ircu/sas3ircu_solaris_x86_rel/sas3ircu - use sparc-solaris && doexe sas3ircu_rel/sas3ircu/sas3ircu_solaris_sparc_rel/sas3ircu - if use efi; then - exeinto /boot/efi/ - doexe sas3ircu_rel/sas3ircu/sas3ircu_udk_uefi_x64_rel/sas3ircu.efi - fi - # The second number is some sort of internal revision that is inconsistent - # between releases. - dodoc IRCU_MPT_GEN3_Phase${PV}.0-*.pdf - dodoc README_SAS3IRCU_P${PV}.txt - use doc && dodoc "${DISTDIR}"/$DISTFILE_DOC -} diff --git a/sys-block/sas3ircu/sas3ircu-5.ebuild b/sys-block/sas3ircu/sas3ircu-5.ebuild deleted file mode 100644 index 3ec87152d04..00000000000 --- a/sys-block/sas3ircu/sas3ircu-5.ebuild +++ /dev/null @@ -1,70 +0,0 @@ -# Copyright 1999-2019 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=5 -inherit mount-boot - -DESCRIPTION="LSI MPT-SAS3 controller management tool" -HOMEPAGE="http://www.lsi.com/support/Pages/download-results.aspx?component=Storage+Component&productfamily=Host+Bus+Adapters&productcode=0&assettype=Miscellaneous&productname=&keyword=SAS3IRCU"; -LICENSE="LSI" -SLOT="0" -KEYWORDS="-* ~amd64 ~ppc64 ~x86 ~sparc-solaris ~x64-solaris ~x86-solaris" -IUSE="efi doc" -RESTRICT="strip fetch mirror" -DEPEND="" -RDEPEND="" -QA_PREBUILT="opt/lsi/sas3ircu boot/efi/sas3ircu.efi" - -MY_PN=SAS3IRCU -MY_P="${MY_PN}_P${PV}" - -DISTFILE_BIN=${MY_P}.zip -DISTFILE_DOC=SAS3IRCU_UG.pdf - -SRC_URI=" -http://www.lsi.com/downloads/Public/Host%20Bus%20Adapters/Host%20Bus%20Adapters%20Common%20Files/SAS_SATA_12G_P${PV}/${DISTFILE_BIN} -doc? ( http://www.lsi.com/downloads/Public/Host%20Bus%20Adapters/${DISTFILE_DOC} ) -" - -LICENSE_URL="http://www.lsi.com/cm/License.do?url=&prodName=&subType=Miscellaneous&locale=EN"; - -S="${WORKDIR}/${MY_P}" - -pkg_nofetch() { - elog "LSI has a mandatory click-through license on thier binaries." - elog "Please visit $HOMEPAGE and download ${DISTFILE_BIN} from the Mangement Software section." - elog "After downloading, move ${MY_P} into your DISTDIR directory" - if use doc; then - elog "Please also download 'SAS-3 Integrated RAID Configuration Utility User Guide' (${DISTFILE_DOC}) " - elog "and also place it into your DISTDIR directory" - fi -} - -supportedcards() { - elog "This binary supports should support ALL cards, including, but not" - elog "limited to the following series:" - elog "" - elog "LSI SAS 3004" - elog "LSI SAS 3008" -} - -src_unpack() { - unpack ${DISTFILE_BIN} -} - -src_install() { - exeinto /opt/lsi/ - use amd64 || use x86 && doexe sas3ircu_linux_x86_rel/sas3ircu - use ppc64 && doexe sas3ircu_linux_x86_rel/sas3ircu - use amd64-fbsd && doexe sas3ircu_freebsd_amd64_rel/sas3ircu - use x86-fbsd && doexe sas3ircu_freebsd_i386_rel/sas3ircu - use x64-solaris || use x86-solaris && doexe sas3ircu_solaris_x86_rel/sas3ircu - use sparc-solaris && doexe sas3ircu_solaris_sparc_rel/sas3ircu - if use efi; then - exeinto /boot/efi/ - doexe sas3ircu_udk_uefi__x64_rel/sas3ircu.efi - fi - dodoc IRCU_MPT_GEN3_Phase5.0-06.00.00.00.pdf - dodoc README_SAS3IRCU_P${PV}.txt - use doc && dodoc "${DISTDIR}"/$DISTFILE_DOC -}
