Hello, pam breaks, because you miss the GRP_STAGE23_USE variable in your make.default. I had the same problem on hppa. If you don't set it, or at least set pam in it, every stage 3 breaks. This is the one I used for hppa : GRP_STAGE23_USE="ipv6 pam tcpd readline nls ssl gpm perl python berkdb acl ncurses"
On Mon, 23 Feb 2004 21:45:39 -0600 Jay Maynard <[EMAIL PROTECTED]> wrote: > On Mon, Feb 23, 2004 at 07:57:50PM -0500, Brad House wrote: > > Also, make sure you kernel has loopback, and ramdisk support > > with a default ram disk size of 8192, as well as Initial > > RAM disk (initrd) support turned on. > > Doh! The last one was the problem. Now, it gets a lot farther, but > still has a problem, as well as some weirdness: > > ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.f3.f2.f1.f0. > ef.b0.b1.b2.b3.ee.ed. > ERROR: ISA table corrupt! > Initializing table to defaults > ec.f4.eb.ea.e9.e8.e7. > > Digital AlphaPC 164 500 MHz Console V5.5-1, Jul 14 1999 12:37:45 > >>>b dka400 -fl x > (boot dka400.4.0.7.0 -flags x) > block 0 of dka400.4.0.7.0 is a valid boot block > reading 170 blocks from dka400.4.0.7.0 > bootstrap code read in > base = 180000, image_start = 0, image_bytes = 15400 > initializing HWRPB at 2000 > initializing page table at 172000 > initializing machine state > setting affinity to the primary CPU > jumping to bootstrap code > aboot: Linux/Alpha SRM bootloader version 0.9bpre > aboot: switching to OSF/1 PALcode version 1.23 > aboot: booting from device 'SCSI 0 7 0 4 400 0 0' > aboot: no disklabel found. > iso: Max size:24196 Log zone size:2048 > iso: First datazone:36 Root inode number 73728 > aboot: could not find default config `x' > Welcome to aboot 0.9bpre > Commands: > h, ? Display this message > q Halt the system and return to SRM > p 1-8 Look in partition <num> for > configuration/kernel l List preconfigured > kernels d <dir> List directory <dir> in current > filesystem b <file> <args> Boot kernel in <file> (- for raw > boot) i <file> Use <file> as initial ramdisk > with arguments <args> > 0-9 Boot preconfiguration 0-9 (list with 'l') > aboot> l > # Option 0, the default, boots /boot/gentoo with the graphics console. > # Option 1 and 2 boots /boot/gentoo with the console set to ttyS0 or > # S1, respectively. More options are present if more kernels are > # included, in the same pattern. > 0:/boot/gentoo initrd=/boot/gentoo.igz root=/dev/ram0 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot 1:/boot/gentoo > initrd=/boot/gentoo.igz root=/dev/ram0 console=ttyS0 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot 2:/boot/gentoo > initrd=/boot/gentoo.igz root=/dev/ram0 console=ttyS1 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot aboot> b /boot/gentoo > initrd=/boot/gentoo.igz root=/dev/ram0 console=ttyS0 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot doscsi aboot: loading uncompressed > /boot/gentoo... aboot: loading compressed /boot/gentoo... > aboot: zero-filling 1693016 bytes at 0xfffffc00015e5998 > aboot: loading initrd (1788972 bytes/1747 blocks) at > 0xfffffc000fc38000 aboot: starting kernel /boot/gentoo with arguments > root=/dev/ram0 console=ttyS0 init=/linuxrc looptype=zisofs > loop=/zisofs cdroot doscsi Linux version 2.4.21-alpha-r4 ([EMAIL PROTECTED]) > (gcc version 3.3.2 20031022 (Gentoo Linux 3.3.2-r2, propolice)) #1 Tue > Feb 24 01:26:29 Local time zone must be set--se e zic manu Booting > GENERIC on EB164 variation PC164 using machine vector PC164 from SRM > Command line: root=/dev/ram0 console=ttyS0 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot doscsi memcluster 0, usage 1, > start 0, end 192 memcluster 1, usage 0, start 192, > end 32651 memcluster 2, usage 1, start 32651, end 32768 > freeing pages 192:2048 > freeing pages 3012:32651 > reserving pages 3012:3013 > Initial ramdisk at: 0xfffffc000fc38000 (1788972 bytes) > pci: cia revision 2 > On node 0 totalpages: 32651 > zone(0): 32651 pages. > zone(1): 0 pages. > zone(2): 0 pages. > Kernel command line: root=/dev/ram0 console=ttyS0 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot doscsi Using epoch = 1980 > Console: colour VGA+ 80x25 > Calibrating delay loop... 990.32 BogoMIPS > Memory: 247368k/261208k available (2814k kernel code, 12304k reserved, > 2854k data, 232k init) Dentry cache hash table entries: 32768 (order: > 6, 524288 bytes) Inode cache hash table entries: 16384 (order: 5, > 262144 bytes) Mount cache hash table entries: 512 (order: 0, 8192 > bytes) Buffer-cache hash table entries: 8192 (order: 3, 65536 bytes) > Page-cache hash table entries: 32768 (order: 5, 262144 bytes) > POSIX conformance testing by UNIFIX > pci: passed tb register update test > pci: passed sg loopback i/o read test > pci: passed tbia test > pci: passed pte write cache snoop test > pci: failed valid tag invalid pte reload test (mcheck; workaround > available) pci: passed pci machine check test > SMC FDC37C93X Ultra I/O Controller found @ 0x370 > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > srm_env: version 0.0.5 loaded successfully > Starting kswapd > Journalled Block Device driver loaded > devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) > devfs: boot_options: 0x0 > Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). > parport0: PC-style at 0x3bc [PCSPP(,...)] > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ > SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > lp0: using parport0 (polling). > rtc: ARC console epoch (1980) detected > Real Time Clock Driver v1.10e > Floppy drive(s): fd0 is 2.88M > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > loop: loaded (max 8 devices) > PPP generic driver version 2.4.2 > PPP Deflate Compression module registered > Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx SCSI subsystem driver Revision: 1.00 > mice: PS/2 mouse device common for all mice > md: linear personality registered as nr 1 > md: raid0 personality registered as nr 2 > md: raid1 personality registered as nr 3 > md: raid5 personality registered as nr 4 > raid5: measuring checksumming speed > 8regs : 557.056 MB/sec > 32regs : 892.928 MB/sec > alpha : 1032.192 MB/sec > alpha prefetch: 892.928 MB/sec > raid5: using function: alpha (1032.192 MB/sec) > md: multipath personality registered as nr 7 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > LVM version 1.0.5+(22/07/2002) > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 4096 buckets, 32Kbytes > TCP: Hash tables configured (established 32768 bind 32768) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 1747k freed > VFS: Mounted root (ext2 filesystem) readonly. > Freeing unused kernel memory: 232k freed > Gentoo initrd startup... > STEP 1: Command-line parsing > STEP 2: Module loading > ---- Scanning for ehci-hcd...cat: /modules.cache: No such file or > directory module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/usb/usbcore.o loaded---- > Detected ehci-hcd hardware---- Scanning for uhci...---- Detected uhci > hardware---- Scanning for usb-ohci...---- Detected usb-ohci hardware > ---- Scanning for hid...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/usb/hid.o loaded---- > Detected hid hardware---- Scanning for usb-storage...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/usb/storage/usb-storage.o > loaded---- Detected usb-storage hardware > ---- Scanning for ieee1394...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/ieee1394/ieee1394.o/lib/m > odules/2.4.21-alpha-r4/kernel/drivers/ieee1394/ohci1394.o loaded---- > Detected ieee1394 hardware---- Scanning for ohci1394...---- Detected > ohci1394 hardware---- Scanning for eth1394...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/ieee1394/eth1394.o > loaded---- Detected eth1394 hardware---- Scanning for sbp2...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/ieee1394/sbp2.o loaded---- > Detected sbp2 hardware---- Scanning for sd_mod...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/scsi/sd_mod.o loaded---- > Detected sd_mod hardware---- Scanning for sg...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/scsi/sg.o loaded---- > Detected sg hardware---- Scanning for sr_mod...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/scsi/sr_mod.o loaded---- > Detected sr_mod hardware---- Scanning for aic7xxx...---- Detected > aic7xxx hardware---- Scanning for aic7xxx_old...---- Detected > aic7xxx_old hardware---- Scanning for BusLogic...---- Detected > BusLogic hardware---- Scanning for ncr53c8xx...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/scsi/ncr53c8xx.o > loaded---- Detected ncr53c8xx hardware---- Scanning for > NCR53c406a...---- Detected NCR53c406a hardware---- Scanning for > initio...no such module found---- Scanning for advansys...---- > Detected advansys hardware---- Scanning for aha1740...---- Detected > aha1740 hardware---- Scanning for aha1542...module > /lib/modules/2.4.21-alpha-r4/kernel/drivers/pnp/isa-pnp.o loaded---- > Detected aha1542 hardware---- Scanning for aha152x...---- Detected > aha152x hardware---- Scanning for atp870u...no such module found > ---- Scanning for dtc...---- Detected dtc hardware > ---- Scanning for eata...no such module found > ---- Scanning for fdomain...---- Detected fdomain hardware > ---- Scanning for gdth...no such module found > ---- Scanning for megaraid...no such module found > ---- Scanning for pas16...no such module found > ---- Scanning for pci2220i...---- Detected pci2220i hardware > ---- Scanning for pci2000...---- Detected pci2000 hardware > ---- Scanning for psi240i...---- Detected psi240i hardware > ---- Scanning for qlogicfas...---- Detected qlogicfas hardware > ---- Scanning for qlogicfc...---- Detected qlogicfc hardware > ---- Scanning for qlogicisp...---- Detected qlogicisp hardware > ---- Scanning for seagate...no such module found > ---- Scanning for t128...---- Detected t128 hardware > ---- Scanning for tmscsim...---- Detected tmscsim hardware > ---- Scanning for u14-34f...---- Detected u14-34f hardware > ---- Scanning for ultrastor...no such module found > ---- Scanning for wd7000...no such module found > ---- Scanning for a100u2w...no such module found > ---- Scanning for 3w-xxxx...---- Detected 3w-xxxx hardware > ---- Scanning for DAC960...---- Detected DAC960 hardware > ---- Scanning for NCR53c406a...---- Detected NCR53c406a hardware > ---- Scanning for aacraid...---- Detected aacraid hardware > ---- Scanning for sym53c8xx...---- Detected sym53c8xx hardware > ---- Scanning for a100u2w...no such module found > ---- Scanning for cpqfc...---- Detected cpqfc hardware > ---- Scanning for dmx3191d...---- Detected dmx3191d hardware > ---- Scanning for dpt_i2o...no such module found > ---- Scanning for imm...no such module found > ---- Scanning for in2000...---- Detected in2000 hardware > ---- Scanning for ips...no such module found > ---- Scanning for qla1280...---- Detected qla1280 hardware > ---- Scanning for sim710...no such module found > ---- Scanning for sym53c416...---- Detected sym53c416 hardware > STEP 3: Mounting necessary filesystems per boot options > Started device management daemon v1.3.25 for /newroot/dev > ---- Attempting to mount CD -- /newroot/dev/cdroms/cdrom0 > ---- CD medium found on /newroot/dev/cdroms/cdrom0 > STEP 4: Determining root device > STEP 5: Finishing up > STEP 5a: filling tmpfs filesystem > STEP 5a2: filling filesystem > STEP 5c: redirect console > STEP 6: pivot_root and exec/chroot real init > STEP 6a: clean up mounts > umount: /tmp/.initrd/dev: not mounted > COULD NOT UMOUNT tmp/.initrd/dev !!! > UMOUNTING /tmp/.initrd > INIT: starting /sbin/init root=/dev/ram0 console=ttyS0 init=/linuxrc > looptype=zisofs loop=/zisofs cdroot doscsi INIT: version 2.84 booting > > Gentoo Linux; http://www.gentoo.org/ > Copyright 2001-2003 Gentoo Technologies, Inc.; Distributed under the > GPL > > * Mounting proc at /proc... [ ok ] > * Starting devfsd...Started device management daemon v1.3.25 for /dev > [ ok ] > * Activating (possible) swap... [ ok ] > * Remounting root filesystem read/write... [ ok ] > * Setting hostname to livecd... [ ok ] > * Mounting local filesystems... [ ok ] > * Mounting USB device filesystem (usbfs)... [ ok ] > * Activating (possibly) more swap... [ ok ] > * Updating inittab... [ ok ] > * Caching service dependencies... [ ok ] > * Setting system clock to hardware clock [UTC]... [ ok ] > * Configuring kernel parameters... [ ok ] > * Updating environment... [ ok ] > * Cleaning /var/lock, /var/run... [ ok ] > * Cleaning /tmp directory... [ ok ] > * Bringing lo up... [ ok ] > * Initializing random number generator... [ ok ] > INIT: Entering runlevel: 3 > * Starting metalog... [ ok ] > * Starting local... [ ok ] > > > This is livecd.unknown_domain (Linux alpha 2.4.21-alpha-r4) 03:24:50 > > livecd login: root > login: PAM Failure, aborting: Critical error - immediate abort > > > This is livecd.unknown_domain (Linux alpha 2.4.21-alpha-r4) 03:25:00 > > > First, unlike previous LiveCDs, this version doesn't look for SCSI > unless the doscsi parameter is passed to the kernel at boot time. > Nearly all Alphas do their disk via SCSI. Is there a defined way to > make doscsi the default, or should I just include it when building the > aboot configuration file? > > Second, /linuxrc reports that hardware has been found if the module is > present, regardless of whether the hardware is actually present and > regardless of whether the module actually loaded. This is mainly a > nuisance. > > Third, and biggest: Why is PAM blowing up? This is almost certainly > why the root user isn't automatically logged in and given the ability > to proceed with the installation. > > It's getting close... > > -- > [EMAIL PROTECTED] mailing list > -- Guy Martin Gentoo Linux - HPPA port Lead / IPv6 team Lug Charleroi (Belgium)
pgp00000.pgp
Description: PGP signature
