Split the estack_* and related functions from eutils into a dedicated
estack.eclass. Those functions have significant complexity and are not
used frequently, therefore they benefit from having a separate file
and an explicit dedicated maintainer.
The new eclass is implicitly inherited by eutils to preserve
compatibility. However, the inherit will be removed in EAPI 7,
and the ebuilds should switch to using estack directly.
[Review note: this is 1:1 code move, no changes between the code]
---
eclass/estack.eclass | 212 +++++++++++++++++++++++++++++++++++++++++++++++++++
eclass/eutils.eclass | 205 +------------------------------------------------
2 files changed, 213 insertions(+), 204 deletions(-)
create mode 100644 eclass/estack.eclass
diff --git a/eclass/estack.eclass b/eclass/estack.eclass
new file mode 100644
index 000000000000..f07f8e5882dc
--- /dev/null
+++ b/eclass/estack.eclass
@@ -0,0 +1,212 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+# @ECLASS: estack.eclass
+# @MAINTAINER:
+# base-sys...@gentoo.org
+# @BLURB: stack-like value storage support
+# @DESCRIPTION:
+# Support for storing values on stack-like variables.
+
+# @FUNCTION: estack_push
+# @USAGE: <stack> [items to push]
+# @DESCRIPTION:
+# Push any number of items onto the specified stack. Pick a name that
+# is a valid variable (i.e. stick to alphanumerics), and push as many
+# items as you like onto the stack at once.
+#
+# The following code snippet will echo 5, then 4, then 3, then ...
+# @CODE
+# estack_push mystack 1 2 3 4 5
+# while estack_pop mystack i ; do
+# echo "${i}"
+# done
+# @CODE
+estack_push() {
+ [[ $# -eq 0 ]] && die "estack_push: incorrect # of arguments"
+ local stack_name="_ESTACK_$1_" ; shift
+ eval ${stack_name}+=\( \"\$@\" \)
+}
+
+# @FUNCTION: estack_pop
+# @USAGE: <stack> [variable]
+# @DESCRIPTION:
+# Pop a single item off the specified stack. If a variable is specified,
+# the popped item is stored there. If no more items are available, return
+# 1, else return 0. See estack_push for more info.
+estack_pop() {
+ [[ $# -eq 0 || $# -gt 2 ]] && die "estack_pop: incorrect # of arguments"
+
+ # We use the fugly _estack_xxx var names to avoid collision with
+ # passing back the return value. If we used "local i" and the
+ # caller ran `estack_pop ... i`, we'd end up setting the local
+ # copy of "i" rather than the caller's copy. The _estack_xxx
+ # garbage is preferable to using $1/$2 everywhere as that is a
+ # bit harder to read.
+ local _estack_name="_ESTACK_$1_" ; shift
+ local _estack_retvar=$1 ; shift
+ eval local _estack_i=\${#${_estack_name}\[@\]}
+ # Don't warn -- let the caller interpret this as a failure
+ # or as normal behavior (akin to `shift`)
+ [[ $(( --_estack_i )) -eq -1 ]] && return 1
+
+ if [[ -n ${_estack_retvar} ]] ; then
+ eval ${_estack_retvar}=\"\${${_estack_name}\[${_estack_i}\]}\"
+ fi
+ eval unset \"${_estack_name}\[${_estack_i}\]\"
+}
+
+# @FUNCTION: evar_push
+# @USAGE: <variable to save> [more vars to save]
+# @DESCRIPTION:
+# This let's you temporarily modify a variable and then restore it (including
+# set vs unset semantics). Arrays are not supported at this time.
+#
+# This is meant for variables where using `local` does not work (such as
+# exported variables, or only temporarily changing things in a func).
+#
+# For example:
+# @CODE
+# evar_push LC_ALL
+# export LC_ALL=C
+# ... do some stuff that needs LC_ALL=C set ...
+# evar_pop
+#
+# # You can also save/restore more than one var at a time
+# evar_push BUTTERFLY IN THE SKY
+# ... do stuff with the vars ...
+# evar_pop # This restores just one var, SKY
+# ... do more stuff ...
+# evar_pop 3 # This pops the remaining 3 vars
+# @CODE
+evar_push() {
+ local var val
+ for var ; do
+ [[ ${!var+set} == "set" ]] \
+ && val=${!var} \
+ || val="unset_76fc3c462065bb4ca959f939e6793f94"
+ estack_push evar "${var}" "${val}"
+ done
+}
+
+# @FUNCTION: evar_push_set
+# @USAGE: <variable to save> [new value to store]
+# @DESCRIPTION:
+# This is a handy shortcut to save and temporarily set a variable. If a value
+# is not specified, the var will be unset.
+evar_push_set() {
+ local var=$1
+ evar_push ${var}
+ case $# in
+ 1) unset ${var} ;;
+ 2) printf -v "${var}" '%s' "$2" ;;
+ *) die "${FUNCNAME}: incorrect # of args: $*" ;;
+ esac
+}
+
+# @FUNCTION: evar_pop
+# @USAGE: [number of vars to restore]
+# @DESCRIPTION:
+# Restore the variables to the state saved with the corresponding
+# evar_push call. See that function for more details.
+evar_pop() {
+ local cnt=${1:-bad}
+ case $# in
+ 0) cnt=1 ;;
+ 1) isdigit "${cnt}" || die "${FUNCNAME}: first arg must be a number:
$*" ;;
+ *) die "${FUNCNAME}: only accepts one arg: $*" ;;
+ esac
+
+ local var val
+ while (( cnt-- )) ; do
+ estack_pop evar val || die "${FUNCNAME}: unbalanced push"
+ estack_pop evar var || die "${FUNCNAME}: unbalanced push"
+ [[ ${val} == "unset_76fc3c462065bb4ca959f939e6793f94" ]] \
+ && unset ${var} \
+ || printf -v "${var}" '%s' "${val}"
+ done
+}
+
+# @FUNCTION: eshopts_push
+# @USAGE: [options to `set` or `shopt`]
+# @DESCRIPTION:
+# Often times code will want to enable a shell option to change code behavior.
+# Since changing shell options can easily break other pieces of code (which
+# assume the default state), eshopts_push is used to (1) push the current shell
+# options onto a stack and (2) pass the specified arguments to set.
+#
+# If the first argument is '-s' or '-u', we assume you want to call `shopt`
+# rather than `set` as there are some options only available via that.
+#
+# A common example is to disable shell globbing so that special meaning/care
+# may be used with variables/arguments to custom functions. That would be:
+# @CODE
+# eshopts_push -o noglob
+# for x in ${foo} ; do
+# if ...some check... ; then
+# eshopts_pop
+# return 0
+# fi
+# done
+# eshopts_pop
+# @CODE
+eshopts_push() {
+ if [[ $1 == -[su] ]] ; then
+ estack_push eshopts "$(shopt -p)"
+ [[ $# -eq 0 ]] && return 0
+ shopt "$@" || die "${FUNCNAME}: bad options to shopt: $*"
+ else
+ estack_push eshopts $-
+ [[ $# -eq 0 ]] && return 0
+ set "$@" || die "${FUNCNAME}: bad options to set: $*"
+ fi
+}
+
+# @FUNCTION: eshopts_pop
+# @USAGE:
+# @DESCRIPTION:
+# Restore the shell options to the state saved with the corresponding
+# eshopts_push call. See that function for more details.
+eshopts_pop() {
+ local s
+ estack_pop eshopts s || die "${FUNCNAME}: unbalanced push"
+ if [[ ${s} == "shopt -"* ]] ; then
+ eval "${s}" || die "${FUNCNAME}: sanity: invalid shopt options:
${s}"
+ else
+ set +$- || die "${FUNCNAME}: sanity: invalid shell
settings: $-"
+ set -${s} || die "${FUNCNAME}: sanity: unable to restore
saved shell settings: ${s}"
+ fi
+}
+
+# @FUNCTION: eumask_push
+# @USAGE: <new umask>
+# @DESCRIPTION:
+# Set the umask to the new value specified while saving the previous
+# value onto a stack. Useful for temporarily changing the umask.
+eumask_push() {
+ estack_push eumask "$(umask)"
+ umask "$@" || die "${FUNCNAME}: bad options to umask: $*"
+}
+
+# @FUNCTION: eumask_pop
+# @USAGE:
+# @DESCRIPTION:
+# Restore the previous umask state.
+eumask_pop() {
+ [[ $# -eq 0 ]] || die "${FUNCNAME}: we take no options"
+ local s
+ estack_pop eumask s || die "${FUNCNAME}: unbalanced push"
+ umask ${s} || die "${FUNCNAME}: sanity: could not restore umask: ${s}"
+}
+
+# @FUNCTION: isdigit
+# @USAGE: <number> [more numbers]
+# @DESCRIPTION:
+# Return true if all arguments are numbers.
+isdigit() {
+ local d
+ for d ; do
+ [[ ${d:-bad} == *[!0-9]* ]] && return 1
+ done
+ return 0
+}
diff --git a/eclass/eutils.eclass b/eclass/eutils.eclass
index ac6a4854d17b..7cca864025a6 100644
--- a/eclass/eutils.eclass
+++ b/eclass/eutils.eclass
@@ -17,7 +17,7 @@
if [[ -z ${_EUTILS_ECLASS} ]]; then
_EUTILS_ECLASS=1
-inherit multilib toolchain-funcs
+inherit estack multilib toolchain-funcs
# @FUNCTION: eqawarn
# @USAGE: [message]
@@ -63,209 +63,6 @@ egit_clean() {
find "$@" -type d -name '.git*' -prune -print0 | xargs -0 rm -rf
}
-# @FUNCTION: estack_push
-# @USAGE: <stack> [items to push]
-# @DESCRIPTION:
-# Push any number of items onto the specified stack. Pick a name that
-# is a valid variable (i.e. stick to alphanumerics), and push as many
-# items as you like onto the stack at once.
-#
-# The following code snippet will echo 5, then 4, then 3, then ...
-# @CODE
-# estack_push mystack 1 2 3 4 5
-# while estack_pop mystack i ; do
-# echo "${i}"
-# done
-# @CODE
-estack_push() {
- [[ $# -eq 0 ]] && die "estack_push: incorrect # of arguments"
- local stack_name="_ESTACK_$1_" ; shift
- eval ${stack_name}+=\( \"\$@\" \)
-}
-
-# @FUNCTION: estack_pop
-# @USAGE: <stack> [variable]
-# @DESCRIPTION:
-# Pop a single item off the specified stack. If a variable is specified,
-# the popped item is stored there. If no more items are available, return
-# 1, else return 0. See estack_push for more info.
-estack_pop() {
- [[ $# -eq 0 || $# -gt 2 ]] && die "estack_pop: incorrect # of arguments"
-
- # We use the fugly _estack_xxx var names to avoid collision with
- # passing back the return value. If we used "local i" and the
- # caller ran `estack_pop ... i`, we'd end up setting the local
- # copy of "i" rather than the caller's copy. The _estack_xxx
- # garbage is preferable to using $1/$2 everywhere as that is a
- # bit harder to read.
- local _estack_name="_ESTACK_$1_" ; shift
- local _estack_retvar=$1 ; shift
- eval local _estack_i=\${#${_estack_name}\[@\]}
- # Don't warn -- let the caller interpret this as a failure
- # or as normal behavior (akin to `shift`)
- [[ $(( --_estack_i )) -eq -1 ]] && return 1
-
- if [[ -n ${_estack_retvar} ]] ; then
- eval ${_estack_retvar}=\"\${${_estack_name}\[${_estack_i}\]}\"
- fi
- eval unset \"${_estack_name}\[${_estack_i}\]\"
-}
-
-# @FUNCTION: evar_push
-# @USAGE: <variable to save> [more vars to save]
-# @DESCRIPTION:
-# This let's you temporarily modify a variable and then restore it (including
-# set vs unset semantics). Arrays are not supported at this time.
-#
-# This is meant for variables where using `local` does not work (such as
-# exported variables, or only temporarily changing things in a func).
-#
-# For example:
-# @CODE
-# evar_push LC_ALL
-# export LC_ALL=C
-# ... do some stuff that needs LC_ALL=C set ...
-# evar_pop
-#
-# # You can also save/restore more than one var at a time
-# evar_push BUTTERFLY IN THE SKY
-# ... do stuff with the vars ...
-# evar_pop # This restores just one var, SKY
-# ... do more stuff ...
-# evar_pop 3 # This pops the remaining 3 vars
-# @CODE
-evar_push() {
- local var val
- for var ; do
- [[ ${!var+set} == "set" ]] \
- && val=${!var} \
- || val="unset_76fc3c462065bb4ca959f939e6793f94"
- estack_push evar "${var}" "${val}"
- done
-}
-
-# @FUNCTION: evar_push_set
-# @USAGE: <variable to save> [new value to store]
-# @DESCRIPTION:
-# This is a handy shortcut to save and temporarily set a variable. If a value
-# is not specified, the var will be unset.
-evar_push_set() {
- local var=$1
- evar_push ${var}
- case $# in
- 1) unset ${var} ;;
- 2) printf -v "${var}" '%s' "$2" ;;
- *) die "${FUNCNAME}: incorrect # of args: $*" ;;
- esac
-}
-
-# @FUNCTION: evar_pop
-# @USAGE: [number of vars to restore]
-# @DESCRIPTION:
-# Restore the variables to the state saved with the corresponding
-# evar_push call. See that function for more details.
-evar_pop() {
- local cnt=${1:-bad}
- case $# in
- 0) cnt=1 ;;
- 1) isdigit "${cnt}" || die "${FUNCNAME}: first arg must be a number:
$*" ;;
- *) die "${FUNCNAME}: only accepts one arg: $*" ;;
- esac
-
- local var val
- while (( cnt-- )) ; do
- estack_pop evar val || die "${FUNCNAME}: unbalanced push"
- estack_pop evar var || die "${FUNCNAME}: unbalanced push"
- [[ ${val} == "unset_76fc3c462065bb4ca959f939e6793f94" ]] \
- && unset ${var} \
- || printf -v "${var}" '%s' "${val}"
- done
-}
-
-# @FUNCTION: eshopts_push
-# @USAGE: [options to `set` or `shopt`]
-# @DESCRIPTION:
-# Often times code will want to enable a shell option to change code behavior.
-# Since changing shell options can easily break other pieces of code (which
-# assume the default state), eshopts_push is used to (1) push the current shell
-# options onto a stack and (2) pass the specified arguments to set.
-#
-# If the first argument is '-s' or '-u', we assume you want to call `shopt`
-# rather than `set` as there are some options only available via that.
-#
-# A common example is to disable shell globbing so that special meaning/care
-# may be used with variables/arguments to custom functions. That would be:
-# @CODE
-# eshopts_push -o noglob
-# for x in ${foo} ; do
-# if ...some check... ; then
-# eshopts_pop
-# return 0
-# fi
-# done
-# eshopts_pop
-# @CODE
-eshopts_push() {
- if [[ $1 == -[su] ]] ; then
- estack_push eshopts "$(shopt -p)"
- [[ $# -eq 0 ]] && return 0
- shopt "$@" || die "${FUNCNAME}: bad options to shopt: $*"
- else
- estack_push eshopts $-
- [[ $# -eq 0 ]] && return 0
- set "$@" || die "${FUNCNAME}: bad options to set: $*"
- fi
-}
-
-# @FUNCTION: eshopts_pop
-# @USAGE:
-# @DESCRIPTION:
-# Restore the shell options to the state saved with the corresponding
-# eshopts_push call. See that function for more details.
-eshopts_pop() {
- local s
- estack_pop eshopts s || die "${FUNCNAME}: unbalanced push"
- if [[ ${s} == "shopt -"* ]] ; then
- eval "${s}" || die "${FUNCNAME}: sanity: invalid shopt options:
${s}"
- else
- set +$- || die "${FUNCNAME}: sanity: invalid shell
settings: $-"
- set -${s} || die "${FUNCNAME}: sanity: unable to restore
saved shell settings: ${s}"
- fi
-}
-
-# @FUNCTION: eumask_push
-# @USAGE: <new umask>
-# @DESCRIPTION:
-# Set the umask to the new value specified while saving the previous
-# value onto a stack. Useful for temporarily changing the umask.
-eumask_push() {
- estack_push eumask "$(umask)"
- umask "$@" || die "${FUNCNAME}: bad options to umask: $*"
-}
-
-# @FUNCTION: eumask_pop
-# @USAGE:
-# @DESCRIPTION:
-# Restore the previous umask state.
-eumask_pop() {
- [[ $# -eq 0 ]] || die "${FUNCNAME}: we take no options"
- local s
- estack_pop eumask s || die "${FUNCNAME}: unbalanced push"
- umask ${s} || die "${FUNCNAME}: sanity: could not restore umask: ${s}"
-}
-
-# @FUNCTION: isdigit
-# @USAGE: <number> [more numbers]
-# @DESCRIPTION:
-# Return true if all arguments are numbers.
-isdigit() {
- local d
- for d ; do
- [[ ${d:-bad} == *[!0-9]* ]] && return 1
- done
- return 0
-}
-
# @VARIABLE: EPATCH_SOURCE
# @DESCRIPTION:
# Default directory to search for patches.
--
2.12.0
