On Mon, 2005-06-20 at 13:50 +0800, Ow Mun Heng wrote: > On Mon, 2005-06-20 at 11:48 +0800, Ow Mun Heng wrote: > > On Mon, 2005-06-20 at 10:22 +0800, Ow Mun Heng wrote: > > > On Sun, 2005-06-19 at 12:41 -0400, Ned Ludd wrote: > > > > On Sun, 2005-06-19 at 22:21 +0800, Ow Mun Heng wrote: > > > > > > > > > > > Next, need to put in iptables/shorewall/dropbear/dhcp(which would be > > > > > recommended?)/freevo(that's the main purpose)/xorg-x11/firefox > > > > > > > > You can drop dhcp3 and just use the udhcpd provided by busybox. > > > > > > Okay.. Cool But even before I get that. dropbear doesn't start. > > > For some reason, it can't find it. (but i can execute it on the cli with > > > no issues. even dropbearkey works) > > > > > > /bin/ash: /etc/init.d/dropbear: not found > > > > Okay... I see this _may_ be due to me not having /sbin/runscript when > > using baselayout-lite. (but even running it on the cli with "dropbear > > -F" just drops me back to the cli, it's not doing anything) > > > > But how do I solve this? And Do I need runscript or?? Right now, not > > even the pcnet32 network card works (am running/trying it out under > > vmware) > > > /ps : am re-compiling my kernel to support pcnet32 within the kernel and > > not as modules to re-try. > > Okay.. done with the re-compile, ifconfig eth0 up brings up the > device... then doing the udhcpc -f gets me "Ooh! Got some!" and it gets > an IP(i can see this from the host system where dhcp is running) but for > some reason, (or is it like this by design?) it doesn't create the > default routes etc via DHCP. it also complains > of /share/udhcpc/default.script is not found. (this is a busybox package > and I don't have a /share directory in my embedded Filesystem)
One more thing. Alhtough it does state it has an IP, but ifconfig eth0 yields no IP at all. Why? > > > Dropbear now runs though. :-) > > but netstat gives me funny results > > tcp 0 0 *:22 *:* > netstat: no support for 'AF INET6 (tcp)' on this system (same for udp > and raw) > > I believe this is cause if no IPV6 support compiled in?? (but dropbear > runs and has a port open. but I can't get in) > > Is there a need for initscripts in embedded platforms or everything runs > from /etc/inittab? If yes, how do I specify it? Or it isn't needed? > > > > > > -- > Ow Mun Heng > Gentoo/Linux on DELL D600 1.4Ghz 1.5GB RAM > 98% Microsoft(tm) Free!! > Neuromancer 13:41:40 up 1 day, 15:44, 7 users, load average: 0.48, 0.31, > 0.22 > > -- Ow Mun Heng Gentoo/Linux on DELL D600 1.4Ghz 1.5GB RAM 98% Microsoft(tm) Free!! Neuromancer 13:57:09 up 1 day, 15:59, 7 users, load average: 1.07, 0.52, 0.33 -- [email protected] mailing list
