Hi, The details:
- Processor: 16/32 bit *AT91SAM7X256* (ARM7TDMI-S™) - 256 K Flash - 64 K RAM - USB 2.0 - Ethernet 10/100 Mbits - 2 x RS-232 - ADC (10 bits), CAN, 2 x UARTs, TWI(I2C), 2 x SPI, 3 x timers 32bit, SSC, 4 x PWM, WDT, PDC (DMA) - Frequency up to 55 MHz - JTAG connector (ARM's 2 x 10 pins - ARM-JTAG compatible) - Color TFT 128 x 128 pixels - SD™/MMC™ - Mini-joystick - Loudspeaker - Audio input/output - Crystal 18,432 MHz sur support - RESET buton - Dimension: 128 x 98 mm The question is not specifically for this hardware but more "when to choose arm and when to choose armeb" ? Thank you On Fri, Oct 3, 2008 at 1:05 PM, Karl Hiramoto <[EMAIL PROTECTED]> wrote: > Jean-Marc Beaune wrote: > > Hi, > > > > I plan to cross-compile for an arm chip but how to know if I should > > choose arm or armeb machine? > > > > Thanks > > -- > > Jean-Marc > Depends.. Maybe give details of your bootloader, board, peripherals, > CPU, etc.. > > > -- > Karl > > > -- Jean-Marc
