On Wed, Mar 4, 2009 at 10:57 PM, Christoph Spielmann <[email protected]> wrote: > Sure... > 1. I think dbus needs to start this, right? Anyway, I start it via the > settings/GSM > > Nope dbus starts gsm0710muxd (or should start). Ophonekitd has to be started > with a script. Or manually by calling ophonekitd. freesmartphone-framework > has to be started with the provided init-script. And if you have the correct > settings GSM-subsystem should be started automatically. Could you send me > the log of frameworkd too please?
Attached. > I think i've seen that one before but i can't remember what the problem was > and how it can be fixed. Hmmm.... > > can you try the following (with pin disabled): > > 1. remove frameworkd and everything else connected to openmoko-specific > stuff (gsm0710muxd, gpsd or fso-gpsd) from default runlevel (if you've added > it) > 2. install mdbus (http://wiki.openmoko.org/wiki/OpenmokoFramework/mdbus) > 2. reboot > 3. log in again and check if gsm0710muxd is running Not running. What should run it other than the init.d script? > 4. start frameworkd (you might have to wait a lil, because frameworkd takes > a bit to start up) OK. > 5. execute the following commands and post the output: > > mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device > org.freesmartphone.GSM.Device.GetInfo > mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device > org.freesmartphone.GSM.SIM.GetSimInfo # mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.Device.GetInfo /org/freesmartphone/GSM/Device: GetInfo failed: org.freesmartphone.Resource.NotEnabled # mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device org.freesmartphone.GSM.SIM.GetSimInfo /org/freesmartphone/GSM/Device: GetSimInfo failed: org.freesmartphone.Resource.NotEnabled Even if i start gsm0710muxd it stays this way, also if I power_on the device. > There is not much documentation for shr (or I could not find ones), does > anyone know a good resource? > > > I'm afraid there is no such thing as good documentation about shr... I made > things work by using trial and error, reading mailing list archives and look > through the tickets. In my case most things work now (phone, sms, suspend > and resume...) Things i know that are not working are pyphonelog which just > displays garbage here and shr-settings is umm very picky about what does and > what doesn't work. Thanks for your help!!! What are me other alternatives? If SHR does not work, is there any other solution I can use, maybe something simpler? zhone does not work either, guess it needs ophonekitd too. Thanks! Alon.
frameworkd.log.gz
Description: GNU Zip compressed data
