Re: [gentoo-embedded] failing to arm...-emerge python-2.6.3

Sun, 18 Oct 2009 15:07:07 -0700 

I'll fix python in openmoko overlay soon(in next few days)

On 10/18/09, David Ford <[email protected]> wrote:
> 2.6.3 doesn't compile for me, 2.6.2-r2 does.  i don't know if you have
> an overlay for this, but the 2.6.2-r2 out of the openmoko overlay builds
> and runs fine.  i think you've already noted that you need to have the
> same python version built on target as on host.
>
> i've no idea about libperl, don't want to go there :>
>
> -david
>
> M. Buchzik wrote:
>> Hello,
>>
>> I'm new to this list and also relatively new (several weeks) to
>> cross-compiling.
>> I'm trying to create a Gentoo Base system for a Netus G20 (mounted on a
>> Fox Board G20, http://netus.acmesystems.it/doku.php ).
>>
>> It's mostly done, but some last ebuilds fail. So I hope, someone here on
>> this list might help me.
>> The output of armv5tejl-softfloat-linux-gnueabi-emerge -pv system:
>> http://php-pro.de/tmp/emerge-system.txt
>> armv5tejl-softfloat-linux-gnueabi-emerge --info:
>> http://php-pro.de/tmp/info.txt
>> And the build log of the "bad guy":
>> http://php-pro.de/tmp/python-2.6.3-arm-build.log
>> On the host system, also python 2.6.3 is installed.
>>
>> one second question is: will I need libtool to be able to continue
>> emerging on the arm system? it depends on libperl, and libperl also
>> won't cross-compile and so I would like to do that later on the
>> arm-system ...
>>
>> Thanks in advance,
>> Michael
>>
>>
>
>
>

Reply via email to