On Sun, 2009-12-27 at 14:23 -0800, Ned Ludd wrote: > On Mon, 2009-12-28 at 00:11 +0200, Ahmed Ammar wrote: > > On Wed, 2009-12-23 at 11:01 +0200, Mirage . wrote: > > > Thank you all for your replies. > > > > > > @Ahmed, The installed version is 20091209 > > > and the command i used was crossdev -s4 --target > > > armv4tl-softfloat-linux-gnueabi --without-headers > > > the gcc version installed with cross-compiler is 4.3.4 and binutils is > > > 2.20 > > > and the one installed on the host is 4.3.2 and binutils is 2.19 > > > > Mirage, > > > > First, please don't top post ... it ruins everyone's formatting. > > > > Ok I've hit this issue before, a while back (regarding s4 not producing > > a complete stage4 compiler) but never really looked into it, I have some > > more queries; > > > > * What are the contents > > of: /etc/portage/package.*/cross-armv4tl-softfloat-linux-gnueabi > > * Whats the output of: emerge --info -v > > > > Temporarily you could try the following <after you saved the above output>: > > > > # crossdev -s4 --ex-only --ex-gcc --target armv4tl-softfloat-linux-gnueabi > > > > A. > > I almost get the feeling she has USE nocxx or build set somewhere.. -s4 > should of worked. More so after accomplishing the old headers trick.
I agree, I stumbled accross this a while back myself crossdev was shoving nocxx in package.use during s1 and never removing it later, but I was also playing with GCC_EXTRA and USE directly from command line. A.
