On Fri, Apr 18, 2008 at 11:43 AM, matt hull <[EMAIL PROTECTED]> wrote: > > > 1) Sound. What's the proper Alsa driver for this machine? lspci shows > > the following: > > > > MacMini ~ # lspci > > > > i dont think the sound is on the pci bus, thats why lspci will not show it. > i dont have the kernel sources here so i can not check how i set mine up. >
OK, that makes sense. > > > > image=/boot/kernel-2.6.24-gentoo-r3 > > label=2.6.24-gentoo-r3 > > root=/dev/hda4 > > partition=4 > > append="video=radeonfb:[EMAIL PROTECTED]" > > read-only > > > > image=/boot/kernel-2.6.24-gentoo-r3_A > > label=2.6.24-gentoo-r3_A > > root=/dev/hda4 > > partition=4 > > append="video=radeonfb:[EMAIL PROTECTED]" > > read-only > > > > and once everything is in place run ybin -v. > > > > Does that sound correct? > > > > yes, except i would shorten the label since you have to type that in. > > matt Great. Thanks. Since I wrote this email earlier this morning I managed to get the new kernel booted and sound it working. MythTV works OK and controls sound levels as long as I set the sound device to PCM inside of Myth. The one problem I'm having right now is that when I try to shut the machine down it hangs on 'Unloading Alsa modules". Only way out so far is the power switch. I'm scanning around for info on this sort of problem but haven't found anyone else reporting it as of yet. Not a good problem but the machine is at least usable. cheers, Mark -- [email protected] mailing list
