This is commented out in my file, cause I haven't been using the
interfaces in many months, but here's what I've got:
#iface_eth0_vlans="101 102"
#iface_eth0_101="10.10.5.50 broadcast 10.10.5.255 netmask 255.255.255.0"
#iface_eth0_102="10.10.1.50 broadcast 10.10.1.255 netmask 255.255.255.0"
Matt
On Aug 10, 2005, at 9:27 AM, Joe Rizzo wrote:
Thanks for the responses.
802.1q is compiled into the kernel. I can configure the interface
with
vconfig and ifconfig manually and it works.
I have read the net.example. The conf.d/net file is good. The
interfaces look exactly the same if I configure them by hand or let
the
net.eth0 script do it.
I am not using ~arch.
Thanks,
Joe Rizzo
-----Original Message-----
From: Matthew Hallmark [mailto:[EMAIL PROTECTED]
Sent: Wednesday, August 10, 2005 7:28 AM
To: [email protected]
Subject: Re: [gentoo-server] 802.1q/VLAN issue
Silly question, but is 8021q compiled into your kernel, or as a
module and loaded? :)
mh
On Aug 10, 2005, at 6:37 AM, A. Khattri wrote:
On Tue, 9 Aug 2005, Arturo 'Buanzo' Busleiman wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Joe Rizzo wrote:
I updated my gentoo system. After emerging system and world, the
system
does not work with VLANs if the interfaces are configured via the
net.eth0 script. However if I configure the interface manually it
works. This worked before I updated. Any Ideas?
Well, baselayout is going under heavy modding lately.... i had
three downgrades already of it :P
are you using arch or ~arch ?
If you have the "new" init script there should be a net.example
file in
/etc/conf.d that is well commented.
--
--
[email protected] mailing list
--
I'd write my senator, but I can't find my checkbook.
--
[email protected] mailing list
--
[email protected] mailing list
--
I'd write my senator, but I can't find my checkbook.
--
[email protected] mailing list
