found the problem

in my kernel .config i added this
Code:
CONFIG_SOUND_BT878=m


hehe.. woops 


On Mon, 17 Mar 2003 13:11:33 -0500
Chris Hall <[EMAIL PROTECTED]> wrote:

> switched from vanilla 2.4.20 to gentoo-sources2.4.20-r1.. 
> 
> the radio tuner works just fine... but tv doesnt?
> 
> [EMAIL PROTECTED] (~) $ xawtv
> This is xawtv-3.85, running on Linux/i686 (2.4.20-gentoo-r1)
> WARNING: no plugins found [/usr/lib/xawtv]
> can't open /dev/v4l/video0: Cannot allocate memory
> v4l-conf had some trouble, trying to continue anyway
> no video grabber device available
> 
> [EMAIL PROTECTED] (~) $ /sbin/lsmod
> Module                  Size  Used by    Tainted: P  
> tuner                   8832   1 (autoclean)
> tvaudio                11388   0 (autoclean) (unused)
> bttv                   69568   0
> i2c-algo-bit            7848   1 [bttv]
> videodev                5728   3 [bttv]
> snd-pcm-oss            38020   1 (autoclean)
> snd-mixer-oss          11128   2 (autoclean) [snd-pcm-oss]
> snd-emu10k1            61296   3
> snd-pcm                56992   0 [snd-pcm-oss snd-emu10k1]
> snd-timer              11528   0 [snd-pcm]
> snd-rawmidi            13472   0 [snd-emu10k1]
> snd-seq-device          4032   0 [snd-emu10k1 snd-rawmidi]
> snd-hwdep               3744   0 [snd-emu10k1]
> snd-util-mem            1440   0 [snd-emu10k1]
> snd-ac97-codec         25988   0 [snd-emu10k1]
> snd                    27148   0 [snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-pcm      
>    
> snd-timer snd-rawmidi snd-seq-device snd-hwdep snd-util-mem snd-ac97-codec]
> soundcore               4004   6 [bttv snd]
> via686a                 7808   0
> eeprom                  3536   0
> i2c-proc                6608   0 [via686a eeprom]
> i2c-isa                 1196   0 (unused)
> i2c-core               14920   0 [tuner tvaudio bttv i2c-algo-bit via686a eeprom     
>    
>  i2c-proc i2c-isa]
> nvidia               1465312  10
> 
> 
> 
> [EMAIL PROTECTED] (~) $ cat /proc/pci 
>       Master Capable.  Latency=32.  
>       I/O at 0xe400 [0xe407].
>   Bus  0, device  13, function  0:
>     Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 17).
>       IRQ 11.
>       Master Capable.  Latency=32.  Min Gnt=16.Max Lat=40.
>       Prefetchable 32 bit memory at 0xfd103000 [0xfd103fff].
>   Bus  0, device  13, function  1:
>     Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 17).
>       IRQ 11.
> 
> 
> 
> [EMAIL PROTECTED] (~) $ dmesg
> tuner: ignoring ISA main adapter i2c adapter [id=0x50000]
> Linux video capture interface: v1.00
> i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208)
> bttv: driver version 0.7.96 loaded
> bttv: using 4 buffers with 2080k (8320k total) for capture
> bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Contr     
>                          
> oller
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 12 for device 00:0d.0
> PCI: Sharing IRQ 12 with 00:0d.1
> PCI: Sharing IRQ 12 with 00:0f.0
> bttv0: Bt878 (rev 17) at 00:0d.0, irq: 12, latency: 32, mmio: 0xf7103000
> bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
> bttv0: using: BT878(AVerMedia TVCapture 98) [card=13,insmod option]
> bttv0: i2c attach [client=EEPROM chip,ok]
> tuner: probing bt848 #0 i2c adapter [id=0x10005]
> tuner: chip found @ 0xc2
> bttv0: i2c attach [client=Philips PAL_I (FI1246 and compat,ok]
> bttv0: Avermedia eeprom[0x4803]: tuner=2 radio:yes remote control:yes
> bttv0: using tuner=2
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642     
>                          
> 0,tda8425,pic16c54 (PV951)
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> tvmixer: debug: EEPROM chip
> tvmixer: debug: Philips PAL_I (FI1246 and compat
> PCI: Found IRQ 10 for device 00:0b.0
> PCI: Sharing IRQ 10 with 00:07.2
> PCI: Sharing IRQ 10 with 00:07.3
> bttv: vmalloc_32(8519680) failed
> bttv: vmalloc_32(8519680) failed
> bttv0: unloading
> tvmixer: debug: EEPROM chip
> tvmixer: debug: Philips PAL_I (FI1246 and compat
> bttv0: i2c detach [client=EEPROM chip,ok]
> bttv0: i2c detach [client=Philips PAL_I (FI1246 and compat,ok]
> Linux video capture interface: v1.00
> i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208)
> bttv: driver version 0.7.96 loaded
> bttv: using 4 buffers with 2080k (8320k total) for capture
> bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Contr     
>                          
> oller
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 12 for device 00:0d.0
> PCI: Sharing IRQ 12 with 00:0d.1
> PCI: Sharing IRQ 12 with 00:0f.0
> bttv0: Bt878 (rev 17) at 00:0d.0, irq: 12, latency: 32, mmio: 0xf7103000
> bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
> bttv0: using: BT878(AVerMedia TVCapture 98) [card=13,insmod option]
> bttv0: i2c attach [client=EEPROM chip,ok]
> bttv0: Avermedia eeprom[0x4803]: tuner=2 radio:yes remote control:yes
> bttv0: using tuner=2
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642     
>                          
> 0,tda8425,pic16c54 (PV951)
> tuner: ignoring ISA main adapter i2c adapter [id=0x50000]
> tuner: probing bt848 #0 i2c adapter [id=0x10005]
> tuner: chip found @ 0xc2
> bttv0: i2c attach [client=Philips PAL_I (FI1246 and compat,ok]
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv: vmalloc_32(8519680) failed
> bttv: vmalloc_32(8519680) failed
> 
> --
> [EMAIL PROTECTED] mailing list
> 


-- 
Chris Hall <[EMAIL PROTECTED]>

[Randomly Created Signature]
 
Q:      How many Marxists does it take to screw in a lightbulb?
A:      None:  The lightbulb contains the seeds of its own revolution.

--
[EMAIL PROTECTED] mailing list

Reply via email to