I'm trying to go with the flow and do some 2.6 testing on my Vaio PCG-R505R/GK, and I'm experiencing a number of things I don't know what to make of. In no particular order:
* The console lost the | character, no matter how hard I hammer on that key on my Japanese 106 keyboard. Works fine in X, though. * cardmgr moans about being unable to get dependency info for eth1 (my WLAN card) and suggests running depscan.sh, but this apparently doesn't have any influence on the card - it's running perfectly. * The mouse pointer in X all of a sudden whirls around the screen like it's on amphetamines, MUCH faster than before (pretty much the same behaviour as in W2K on the same machine) * My jogdial (really a wheel in the touchpad) has finally started to ackknowledge it's a middle mouse button! I can now paste highlighted text by pressing on that wheel - but of course sjogdial comes up, too... * KWifimanager crashes with SIGFPE (never had a problem with that in 2.4.20) * Plugging in (and mounting) a USB flash memory stick works fine, unplugging it, even after umounting, well: I've attached the dmesg output... Hope I'm not annoying anyone with this not very systematic approach to debugging... :) Any comments warmly welcome. Cheers Ulrich Plate
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 1, assigned address 2 scsi2 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: Flash Disk Rev: 7.77 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 128000 512-byte hdwr sectors (66 MB) sdb: Write Protect is off sdb: Mode Sense: 00 06 00 00 SCSI device sdb: drive cache: write through /dev/scsi/host2/bus0/target0/lun0: p1 Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 usb 1-1: USB disconnect, address 2 Device class '2:0:0:0' does not have a release() function, it is broken and must be fixed. Badness in class_dev_release at drivers/base/class.c:201 Call Trace: [<c02291b8>] kobject_cleanup+0x88/0x90 [<c02a0493>] class_device_unregister+0x13/0x30 [<c02e060f>] scsi_device_unregister+0x1f/0x30 [<c02dfbff>] scsi_remove_device+0xf/0x20 [<c02dfdd8>] scsi_forget_host+0x28/0x40 [<c02da5e3>] scsi_remove_host+0x43/0x50 [<c033c451>] storage_disconnect+0x71/0x8b [<c032cb76>] usb_unbind_interface+0x76/0x80 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c032d665>] usb_disconnect+0xd5/0x100 [<c032fe1f>] hub_port_connect_change+0x33f/0x350 [<c032f68d>] hub_port_status+0x3d/0xb0 [<c033014c>] hub_events+0x31c/0x360 [<c03301c5>] hub_thread+0x35/0xf0 [<c03efc1e>] ret_from_fork+0x6/0x14 [<c0118ec0>] default_wake_function+0x0/0x30 [<c0330190>] hub_thread+0x0/0xf0 [<c0109259>] kernel_thread_helper+0x5/0xc kobject 'class_obj' does not have a release() function, it is broken and must be fixed. Badness in kobject_cleanup at lib/kobject.c:402 Call Trace: [<c022918f>] kobject_cleanup+0x5f/0x90 [<c02e060f>] scsi_device_unregister+0x1f/0x30 [<c02dfbff>] scsi_remove_device+0xf/0x20 [<c02dfdd8>] scsi_forget_host+0x28/0x40 [<c02da5e3>] scsi_remove_host+0x43/0x50 [<c033c451>] storage_disconnect+0x71/0x8b [<c032cb76>] usb_unbind_interface+0x76/0x80 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c032d665>] usb_disconnect+0xd5/0x100 [<c032fe1f>] hub_port_connect_change+0x33f/0x350 [<c032f68d>] hub_port_status+0x3d/0xb0 [<c033014c>] hub_events+0x31c/0x360 [<c03301c5>] hub_thread+0x35/0xf0 [<c03efc1e>] ret_from_fork+0x6/0x14 [<c0118ec0>] default_wake_function+0x0/0x30 [<c0330190>] hub_thread+0x0/0xf0 [<c0109259>] kernel_thread_helper+0x5/0xc kobject 'sdb1' does not have a release() function, it is broken and must be fixed. Badness in kobject_cleanup at lib/kobject.c:402 Call Trace: [<c022918f>] kobject_cleanup+0x5f/0x90 [<c0180efc>] delete_partition+0x8c/0xc0 [<c01814e9>] del_gendisk+0x39/0xe0 [<c02ed030>] sd_remove+0x20/0x60 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c02dfbff>] scsi_remove_device+0xf/0x20 [<c02dfdd8>] scsi_forget_host+0x28/0x40 [<c02da5e3>] scsi_remove_host+0x43/0x50 [<c033c451>] storage_disconnect+0x71/0x8b [<c032cb76>] usb_unbind_interface+0x76/0x80 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c032d665>] usb_disconnect+0xd5/0x100 [<c032fe1f>] hub_port_connect_change+0x33f/0x350 [<c032f68d>] hub_port_status+0x3d/0xb0 [<c033014c>] hub_events+0x31c/0x360 [<c03301c5>] hub_thread+0x35/0xf0 [<c03efc1e>] ret_from_fork+0x6/0x14 [<c0118ec0>] default_wake_function+0x0/0x30 [<c0330190>] hub_thread+0x0/0xf0 [<c0109259>] kernel_thread_helper+0x5/0xc kobject 'iosched' does not have a release() function, it is broken and must be fixed. Badness in kobject_cleanup at lib/kobject.c:402 Call Trace: [<c022918f>] kobject_cleanup+0x5f/0x90 [<c02a143a>] elv_unregister_queue+0x1a/0x40 [<c02a4d0e>] blk_unregister_queue+0x1e/0x50 [<c02a5d81>] unlink_gendisk+0x21/0x90 [<c0181516>] del_gendisk+0x66/0xe0 [<c02ed030>] sd_remove+0x20/0x60 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c02dfbff>] scsi_remove_device+0xf/0x20 [<c02dfdd8>] scsi_forget_host+0x28/0x40 [<c02da5e3>] scsi_remove_host+0x43/0x50 [<c033c451>] storage_disconnect+0x71/0x8b [<c032cb76>] usb_unbind_interface+0x76/0x80 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c032d665>] usb_disconnect+0xd5/0x100 [<c032fe1f>] hub_port_connect_change+0x33f/0x350 [<c032f68d>] hub_port_status+0x3d/0xb0 [<c033014c>] hub_events+0x31c/0x360 [<c03301c5>] hub_thread+0x35/0xf0 [<c03efc1e>] ret_from_fork+0x6/0x14 [<c0118ec0>] default_wake_function+0x0/0x30 [<c0330190>] hub_thread+0x0/0xf0 [<c0109259>] kernel_thread_helper+0x5/0xc kobject 'queue' does not have a release() function, it is broken and must be fixed. Badness in kobject_cleanup at lib/kobject.c:402 Call Trace: [<c022918f>] kobject_cleanup+0x5f/0x90 [<c02a4d1c>] blk_unregister_queue+0x2c/0x50 [<c02a5d81>] unlink_gendisk+0x21/0x90 [<c0181516>] del_gendisk+0x66/0xe0 [<c02ed030>] sd_remove+0x20/0x60 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c02dfbff>] scsi_remove_device+0xf/0x20 [<c02dfdd8>] scsi_forget_host+0x28/0x40 [<c02da5e3>] scsi_remove_host+0x43/0x50 [<c033c451>] storage_disconnect+0x71/0x8b [<c032cb76>] usb_unbind_interface+0x76/0x80 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c032d665>] usb_disconnect+0xd5/0x100 [<c032fe1f>] hub_port_connect_change+0x33f/0x350 [<c032f68d>] hub_port_status+0x3d/0xb0 [<c033014c>] hub_events+0x31c/0x360 [<c03301c5>] hub_thread+0x35/0xf0 [<c03efc1e>] ret_from_fork+0x6/0x14 [<c0118ec0>] default_wake_function+0x0/0x30 [<c0330190>] hub_thread+0x0/0xf0 [<c0109259>] kernel_thread_helper+0x5/0xc Device class 'host2' does not have a release() function, it is broken and must be fixed. Badness in class_dev_release at drivers/base/class.c:201 Call Trace: [<c02291b8>] kobject_cleanup+0x88/0x90 [<c029df78>] device_del+0x68/0xa0 [<c02daaaf>] scsi_host_put+0x1f/0x2f [<c033c246>] usb_stor_release_resources+0xd6/0xe0 [<c032cb76>] usb_unbind_interface+0x76/0x80 [<c029f6d6>] device_release_driver+0x66/0x70 [<c029f82e>] bus_remove_device+0x5e/0xb0 [<c029df6d>] device_del+0x5d/0xa0 [<c029dfc3>] device_unregister+0x13/0x30 [<c032d665>] usb_disconnect+0xd5/0x100 [<c032fe1f>] hub_port_connect_change+0x33f/0x350 [<c032f68d>] hub_port_status+0x3d/0xb0 [<c033014c>] hub_events+0x31c/0x360 [<c03301c5>] hub_thread+0x35/0xf0 [<c03efc1e>] ret_from_fork+0x6/0x14 [<c0118ec0>] default_wake_function+0x0/0x30 [<c0330190>] hub_thread+0x0/0xf0 [<c0109259>] kernel_thread_helper+0x5/0xc
pgp00000.pgp
Description: PGP signature
