> What is the output of ifconfig? Are you running both nic's
> simultaneously?
>
> It sounds like TCP is working (guarantees trans/rcv), while UDP/ICMP is
> not (no guarantee). Although I forget if mail is UDP or TCP.
>
> When I run multiple nic's at work, I have (luckily) always had to keep
> them on separate subnets. Makes this stuff a lot easier. If nothing
> turns up I would suggest getting one working with the other totally not
> present. Then get the other working on a different subnet. eg:
>
> eth0 192.168.1.x netmask 255.255.255.0 # 10/100
> eth1 192.168.2.y netmask 255.255.255.0 # wireless
>
> HTH,
>
> Cooper.
Yeah I'm running both nic's simultaneously, but use the wireless
connection most of the time.
ifconfig results:
eth0 Link encap:Ethernet HWaddr 00:08:0D:8A:6A:0A
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:174 errors:0 dropped:0 overruns:0 frame:0
TX packets:281 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:20182 (19.7 Kb) TX bytes:39817 (38.8 Kb)
Interrupt:11 Base address:0xdf40 Memory:fceff000-fceff038
eth1 Link encap:Ethernet HWaddr 00:06:25:2B:1A:54
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6543 errors:2348 dropped:2348 overruns:0 frame:0
TX packets:5961 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:3456252 (3.2 Mb) TX bytes:1049310 (1.0 Mb)
Interrupt:3 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6223 errors:0 dropped:0 overruns:0 frame:0
TX packets:6223 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:328508 (320.8 Kb) TX bytes:328508 (320.8 Kb)
--
[EMAIL PROTECTED] mailing list
