I have been able to create a new kernel 22.4.20-r6, it now built properly as no
errors. On reboot I get the following:
VFS: can not mount fs on 03:03
and the system goes no farther.
My fstab file.
cdimage / # more /etc/fstab
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.12 2003/03/11 02:50:
53 azarah Exp $
#
# noatime turns of atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# <fs> <mountpoint> <type> <opts> <
dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext3 noauto,noatime 1
1
/dev/hda3 / reiserfs default 0
0
/dev/hda2 none swap sw 0
0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0
0
/dev/hda5 /home reiserfs default 0
0
/dev/hda6 /swdev reiserfs default 0
0
/dev/hda7 /opt reiserfs default 0
0
/dev/hda8 /test reiserfs default 0
0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0
0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults 0
0
hardware:
cdimage / # lshw
cdimage
product: System Name
vendor: System Manufacturer
version: System Version
serial: SYS-1234567890
capabilities: smbios-2.3 dmi-2.3
*-core
description: Motherboard
product: <P3B-F>
vendor: ASUSTeK Computer INC.
version: REV 1.xx
serial: xxxxxxxxxxx slot: SECONDARY IDE/HDD
*-firmware
description: BIOS
vendor: Award Software, Inc.
version: ASUS P3B-F ACPI BIOS Revision 1006 (05/19/2000)
size: 64KB
capacity: 192KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect
socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880
int5printscreen int9keyboard int14serial int17printer int10video acpi agp
*-cpu
product: Pentium III (Katmai)
vendor: Intel Corp.
version: 6.7.3
slot: SLOT 1
size: 500MHz
capacity: 800MHz
clock: 100MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr
pge mca cmov pat pse36 mmx fxsr sse
*-cache:0
description: Pipeline burst Synchronous Internal L1 write-back Cache
(data cache)
slot: L1 Cache
size: 32KB
capacity: 32KB
*-cache:1
description: Pipeline burst Synchronous Internal L2 write-back Cache
(data cache)
slot: L2 Cache
size: 512KB
capacity: 512KB
*-memory
description: System Memory
slot: System board or motherboard
size: 704MB
capacity: 1GB
*-bank:0
description: DIMM DRAM Synchronous 72/64 bits
slot: DIMM 1
size: 256MB
*-bank:1
description: DIMM DRAM Synchronous 72/64 bits
slot: DIMM 2
size: 256MB
*-bank:2
description: DIMM DRAM Synchronous 72/64 bits
slot: DIMM 3
size: 64MB
*-bank:3
description: DIMM DRAM Synchronous 72/64 bits
slot: DIMM 4
size: 128MB
*-pci
version: 03
clock: 33MHz
*-pci:0
version: 03
clock: 66MHz
capabilities: bus_master
*-display UNCLAIMED
version: 11
size: 32MB
clock: 66MHz
capabilities: bus_master cap_list
configuration: irq=11
*-isa UNCLAIMED
version: 02
clock: 33MHz
capabilities: bus_master
*-ide
version: 01
clock: 33MHz
capabilities: bus_master
*-ide:0
description: Channel 0
logical name: ide0
clock: 33MHz
*-disk:0
description: ATA Disk
product: Maxtor 96147H8
logical name: /dev/hda
version: BAC51KJ0
serial: N80BRWRC
size: 57GB
capacity: 57GB
capabilities: ata dma lba iordy smart pm apm
configuration: apm=off mode=udma2 smart=on
*-disk:1
description: ATA Disk
product: Maxtor 53073U6
logical name: /dev/hdb
version: DA6207V0
serial: K606FQYC
size: 28GB
capacity: 28GB
capabilities: ata dma lba iordy smart pm apm
configuration: apm=off mode=udma2 smart=on
*-ide:1
description: Channel 1
logical name: ide1
clock: 33MHz
*-cdrom
description: CD-ROM
product: CD-ROM 52X/AKH
logical name: /dev/hdc
version: A62
capabilities: atapi cdrom removable nonmagnetic dma lba iordy audio
*-usb
version: 01
clock: 33MHz
capabilities: bus_master
configuration: driver=usb-uhci irq=5
*-bridge UNCLAIMED
version: 02
clock: 33MHz
configuration: irq=9
*-multimedia UNCLAIMED
version: 07
clock: 33MHz
capabilities: bus_master cap_list
configuration: irq=5
*-scsi:0
description: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.30
<Adaptec 2940 Ultra2 SCSI adapter> aic7890/91: Ultra2 Wide Channel A, SCSI
Id=7, 32/253 SCBs
logical name: scsi0
version: 00
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=aic7xxx irq=10
*-channel
description: Channel 0
*-disk:0
description: Disk
product: ST34555N
vendor: SEAGATE
logical name: /dev/sda
version: 0930
size: 4340MB
capacity: 4380MB
capabilities: 7200rpm
configuration: ansiversion=2
*-cdrom
description: DVD-RAM writer
product: CD-ROM CD-532S
vendor: TEAC
logical name: /dev/sr0
version: 1.0A
capabilities: removable audio cd-rw dvd-ram
configuration: ansiversion=2
*-disk:1
description: Disk
product: ST318203LW
vendor: SEAGATE
logical name: /dev/sdb
version: 0002
size: 16GB
capacity: 16GB
capabilities: 10000rpm
configuration: ansiversion=2
*-scsi:1
description: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.30
<Adaptec 2940 Ultra SCSI adapter> aic7880: Ultra Wide Channel A, SCSI
Id=15, 16/253 SCBs
logical name: scsi1
version: 01
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=aic7xxx irq=11
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=aic7xxx irq=11
*-channel
description: Channel 0
*-tape
description: Tape
product: 4326XX 27871-XXX
vendor: ARCHIVE
logical name: /dev/nst0
version: 0316
capabilities: removable
configuration: ansiversion=2
*-disk
description: Disk
product: DGHS09Y
vendor: IBM
logical name: /dev/sdc
version: 03E0
size: 8748MB
capacity: 10GB
capabilities: 7200rpm
configuration: ansiversion=3
*-pci:1
version: 01
clock: 33MHz
capabilities: bus_master
*-scsi:0
version: 00
clock: 33MHz
capabilities: bus_master
configuration: driver=aic7xxx irq=5
*-scsi:1
description: Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.30
<Adaptec 3940 Ultra SCSI adapter> aic7880: Ultra Single Channel B, SCSI
Id=7, 16/253 SCBs
logical name: scsi3
version: 00
clock: 33MHz
capabilities: bus_master
configuration: driver=aic7xxx irq=11
*-channel
description: Channel 0
*-cdrom
description: CD-R/CD-RW writer
product: CRW6416S
vendor: YAMAHA
logical name: /dev/sr1
version: 1.0b
capabilities: removable audio cd-r cd-rw
configuration: ansiversion=2
*-network
version: 10
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=8139too irq=10
cdimage / #
I can boot back into cdimage no problem, the old kernel will not boot into fs either.
any help is appreciated here
cheers
--
Rick Sivernell
Dallas, Texas 75287
972 306-2296
[EMAIL PROTECTED]
Gentoo Linux
Registered Linux User
.~.
/ v \
/( _ )\
^ ^
In Linux we trust!
--
[EMAIL PROTECTED] mailing list
