Le Jeudi 25 Septembre 2003 16:19, Andrew Gaffney a �crit : > mathieu wrote: > > Hi! > > > > I've just installed lm-sensors to peek at my motherboard. > > I've got the following informations. > > I don't understand everything but I don't like the ALARM messages... > > Can I trust those informations? Should I call the firemen? > > And I'm specially worried about the +224.4�C (limit +120�). > > After a few tries, all infomations seem pretty static, only the temp2 > > changes a bit. > > > > > > as99127f-i2c-0-2d > > Adapter: SMBus Via Pro adapter at e800 > > Algorithm: Non-I2C SMBus adapter > > VCore 1: +1.84 V (min = +1.76 V, max = +2.14 V) > > VCore 2: +0.09 V (min = +1.76 V, max = +2.14 V) ALARM > > +3.3V: +3.26 V (min = +2.97 V, max = +3.63 V) > > +5V: +4.80 V (min = +4.50 V, max = +5.48 V) > > +12V: +12.27 V (min = +10.79 V, max = +13.11 V) > > -12V: -7.55 V (min = -15.06 V, max = -12.32 V) ALARM > > -5V: -2.66 V (min = -5.48 V, max = -4.50 V) ALARM > > fan1: 3901 RPM (min = 3000 RPM, div = 2) > > fan2: 0 RPM (min = 3000 RPM, div = 2) ALARM > > fan3: 0 RPM (min = 3000 RPM, div = 2) ALARM > > temp1: +33�C (limit = +60�C) > > temp2: +69.0�C (limit = +120�C, hysteresis = +100�C) (beep) > > temp3: +224.4�C (limit = +120�C, hysteresis = +100�C) > > vid: +1.950 V > > alarms: > > beep_enable: > > Sound alarm enabled > > I think that 224.4 is the maximum temp that the sensors can report, > which probably means that the sensor isn't working anymore or doesn't > actually exist on the motherboard.
thanks andrew, I feel more confortable now. But I'm still worried about other ALARMs. Do you have some advice about them? -- mathieu perrenoud -- [EMAIL PROTECTED] mailing list
