Hi Sigurd, Sorry I made a mistake.
This PC has 2 NICs. I use eth1 to connect broadband leaving eth0 idle without removed. # dmesg | grep eth eth0: RealTek RTL8139 Fast Ethernet at 0xd8c19000, 00:50:fc:6c:70:f7, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' eth1: RealTek RTL8139 Fast Ethernet at 0xd8c1b000, 00:50:fc:61:f3:94, IRQ 10 eth1: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000. eth0: no IPv6 routers present eth1: Setting half-duplex based on auto-negotiated partner ability 0000. eth1: no IPv6 routers present B.R. Stephen On Thursday 23 October 2003 12:10, Sigurd Stordal wrote: > > > > (Remark: the denotation of NIC of this PC is eth1 because previously > > > > it had 2 NICs, eth0 and eth1. I removed eth0, the remaining NIC > > > > retaining eth1) > > This I don't understand. Do you have only one NIC, then this NIC should be > eth0 no matter what it was before. But if you have to NIC's, or one ppp > connection, then it makes more sense. > what will dmesg | grep eth give. -- [EMAIL PROTECTED] mailing list
