The log file doesn't show the usual module loading info. Even though it scans
your bus and finds the card, all the basic modules (libbitmap, libpcidata, etc)
aren't reported as loaded. Looking closer for the usual message about the
ModulePath (which doesn't require an XF86Config entry), I see that it isn't
being spit out as part of the usual routine (where it should be around is
marked %% HERE %% below)
Try adding to the Files section of XF86Config
ModulePath "/usr/X11R6/lib/modules"
ModulePath "/usr/X11R6/lib/Server/modules"
(or wherever your modules are kept; two locations are likely a minimal because
no default is reported)
Send me a new log if you want. Maybe the above will fix. Sending message to
list as well because my last mail bounced.
--DB
--- downtime null <[EMAIL PROTECTED]> wrote:
> here ya go!
>
> XFree86 Version 4.3.0
> Release Date: 27 February 2003
> X Protocol Version 11, Revision 0, Release 6.6
> Build Operating System: Linux 2.4.21 i686 [ELF]
> Build Date: 14 October 2003
> Before reporting problems, check http://www.XFree86.Org/
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 11 13:41:58 2003
> (==) Using config file: "/etc/X11/XF86Config"
> (==) ServerLayout "Simple Layout"
> (**) |-->Screen "Screen 1" (0)
> (**) | |-->Monitor "Dell 1025TM"
> (**) | |-->Device "NVidia"
> (**) |-->Input Device "Mouse1"
> (**) |-->Input Device "Keyboard1"
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "us"
> (**) XKB: layout: "us"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Tablet"
> (**) FontPath set to
>
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/truetype/"
> (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> Using vt 7
> (--) using VT number 7
%% HERE %%
>
> (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
______________________________________________________________________
Post your free ad now! http://personals.yahoo.ca
--
[EMAIL PROTECTED] mailing list
