After some updates and fixing the sound problem caused by them i started
getting the following error during boot when it gets to setting up the
usb/pci hotpluging. I have attached everything dmesg put out. Everything
seems to be working, but I dont like the idea of an error during boot.
**cant synthesize input events /proc/bus/input/devices missing**
--
Chris
bash-2.05b$ dmesg
Linux version 2.4.20-gaming-r7 ([EMAIL PROTECTED]) (gcc version 3.2.3 20030422 (Gentoo
Linux 1.4 3.2.3-r3, propolice)) #1 Wed Jan 7 14:41:01 CST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000fef3000 (ACPI NVS)
BIOS-e820: 000000000fef3000 - 000000000ff00000 (ACPI data)
BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
254MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 GBT ) @ 0x000f6c60
ACPI: RSDT (v001 GBT AWRDACPI 16944.11825) @ 0x0fef3000
ACPI: FADT (v001 GBT AWRDACPI 16944.11825) @ 0x0fef3040
ACPI: MADT (v001 GBT AWRDACPI 16944.11825) @ 0x0fef6980
ACPI: DSDT (v001 GBT AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Kernel command line: BOOT_IMAGE=Gentoo ro root=343
Initializing CPU#0
Detected 1002.293 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1998.84 BogoMIPS
Memory: 254524k/261056k available (2362k kernel code, 6144k reserved, 580k data, 124k
init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021122
PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
PCI: Using configuration type 1
ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0511: *** Info: GPE Block1 defined as GPE16 to GPE31
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
SGI XFS snapshot 2.4.20-2003-01-14_00:43_UTC with ACLs, DMAPI, realtime, quota, no
debug enabled
vesafb: framebuffer at 0xe0000000, mapped to 0xd0807000, size 32768k
vesafb: mode is 640x480x16, linelength=1280, pages=5
vesafb: protected mode interface info at c000:c650
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD200EB-00CPF0, ATA DISK drive
hdb: Maxtor 6Y080P0, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive
hdd: Hewlett-Packard CD-Writer Plus 7500, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0429744, I/O limit 4095Mb (mask 0xffffffff)
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(100)
blk: queue c0429884, I/O limit 4095Mb (mask 0xffffffff)
hdb: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=9964/255/63, UDMA(100)
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache, DMA
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Equalizer1996: $Revision: 1.2.1 $ $Date: 1996/09/22 13:52:00 $ Simon Janes ([EMAIL
PROTECTED])
Linux video capture interface: v1.00
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.30 time 14:45:51 Jan 7 2004
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
reiserfs: checking transaction log (device 03:43) ...
Warning, log replay starting on readonly filesystem
reiserfs: replayed 14 transactions in 1 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 124k freed
Adding Swap: 594396k swap-space (priority -1)
reiserfs_getopt: unknown option "tail"
reiserfs_getopt: unknown option "tail"
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328 Wed Dec 17
13:54:51 PST 2003
quickcam [54.684900]: ----------LOADING QUICKCAM MODULE------------
quickcam [54.684921]: struct quickcam size: 5408
usb.c: registered new driver quickcam
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,68), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0: clocking to 48000
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
hub.c: new USB device 00:1f.2-1, assigned address 2
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
quickcam: QuickCam USB camera found (driver version QuickCam USB $Date: 2003/06/30
10:04:40 $)
quickcam: Sensor HDCS-1020 detected
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
hub.c: new USB device 00:1f.2-2, assigned address 3
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid
0x106A
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
Intel 810 + AC97 Audio, version 0.24, 15:09:40 Jan 7 2004
inserting floppy driver for 2.4.20-gaming-r7
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
HCF ASIC ID: 95
HCF DATAPUMP PART: '73' REV: 'BA'
0385928.296: HCF: STARTNEWC ERROR
0385928.296: HCF: WA_3333Workaround FAILED
0385928.296: HCF: DEVMGR ERROR: WA3333 FAILED???
0385928.296: HCF: DEVMGR ERROR!!!! DpReset returns FALSE, attempt=0
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
bash-2.05b$
--
[EMAIL PROTECTED] mailing list
