thanks for your reply.
In attachment there is my make.conf file. There you can find my C/CXX - Flags
Michael Gruetzner wrote:
Hello,
what are your C/CXX-Flags. I have experienced that kind of errors when the
optimization was "too hard".
Hth
Michael
On Tue, 20 Jan 2004 12:32:10 +0100, Koala Gnu <[EMAIL PROTECTED]> wrote:
I forgot to mention that the first three installation had pentium4 as cpu arch, but the error was the same. So I do not think this is the solution.
Bruce Munro wrote:
On Tue, 2004-01-20 at 09:59, Koala Gnu wrote:
Hi all,
I tried to install 4 times gentoo on my workstation having Mandrake 9.0.
My computer is a Pentium 4 IBM Netvista.
I used a 2 Gb partition for gentoo and I followed all the steps of the italian gentoo guide at
www.gentoo.it.
I run /scripts/bootstrap.sh and I got the following error. I think this could be a BUG, I tried to submit it, but I do not have an BUGZILLA account.
Any help is welcome.
gcc getw.c -c -std=gnu99 -O2 -Wall -Winline -Wstrict-prototypes -Wwrite-strings -freorder-blocks -mcpu=i686 -pipe [snip]
<stdin>: Assembler messages:
<stdin>:3: Error: no such instruction: `rret'
make[2]: *** [/var/tmp/portage/glibc-2.3.2-r9/work/glibc-2.3.2/buildhere/stdio-common/rename.os] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/var/tmp/portage/glibc-2.3.2-r9/work/glibc-2.3.2/stdio-common'
make[1]: *** [stdio-common/subdir_lib] Error 2
make[1]: Leaving directory `/var/tmp/portage/glibc-2.3.2-r9/work/glibc-2.3.2'
make: *** [all] Error 2
!!! ERROR: sys-libs/glibc-2.3.2-r9 failed. !!! Function src_compile, Line 495, Exitcode 2 !!! (no error message)
Suspect you have set the wrong architecture. The error would seem to indicate that the assembler is being passed an instruction it doesn't understand. Try setting your arch/cpu-type to "pentium4".
-Bruce
-- [EMAIL PROTECTED] mailing list
-- [EMAIL PROTECTED] mailing list
# Copyright 2000-2002 Daniel Robbins, Gentoo Technologies, Inc. # Contains local system settings for Portage system # Please review 'man make.conf' for more information.
# Build-time functionality # ======================== # # The USE variable is used to enable optional build-time functionality. For # example, quite a few packages have optional X, gtk or GNOME functionality # that can only be enabled or disabled at compile-time. Gentoo Linux has a # very extensive set of USE variables described in our USE variable HOWTO at # http://www.gentoo.org/doc/use-howto.html # # The available list of use flags with descriptions is in your portage tree. # Use 'less' to view them: --> less /usr/portage/profiles/use.desc <-- # # Example: #USE="X gtk gnome -alsa" # Host Setting # ============ # # If you are using a Pentium Pro or greater processor, leave this line as-is; # otherwise, change to i586, i486 or i386 as appropriate. All modern systems # (even Athlons) should use "i686-pc-linux-gnu" # CHOST="i686-pc-linux-gnu" # Host and optimization settings # ============================== # # For optimal performance, enable a CFLAGS setting appropriate for your CPU # # -mcpu=<cpu-type> means optimize code for the particular type of CPU without # breaking compatibility with other CPUs. # # -march=<cpu-type> means to take full advantage of the ABI and instructions # for the particular CPU; this will break compatibility with older CPUs (for # example, -march=athlon-xp code will not run on a regular Athlon, and # -march=i686 code will not run on a Pentium Classic. # # CPU types supported in gcc-3.2 and higher: athlon-xp, athlon-mp, athlon-4, # athlon-tbird, athlon, k6, k6-2, k6-3, i386, i486, i586 (Pentium), i686 # (PentiumPro), pentium, pentium-mmx, pentiumpro, pentium2 (Celeron), pentium3, # and pentium4. Note that Gentoo Linux 1.4 and higher include at least gcc-3.2. # # CPU types supported in gcc-2.95*: k6, i386, i486, i586 (Pentium), i686 # (Pentium Pro), pentium, pentiumpro Gentoo Linux 1.2 and below use gcc-2.95* # # Decent examples: # #CFLAGS="-mcpu=athlon-xp -O3 -pipe" CFLAGS="-O3 -mcpu=i686 -funroll-loops -pipe" # If you set a CFLAGS above, then this line will set your default C++ flags to # the same settings. If you don't set CFLAGS above, then comment this line out. CXXFLAGS="${CFLAGS}" # Advanced Masking # ================ # # Gentoo is using a new masking system to allow for easier stability testing # on packages. KEYWORDS are used in ebuilds to mask and unmask packages based # on the platform they are set for. A special form has been added that # indicates packages and revisions that are expected to work, but have not yet # been approved for the stable set. '~arch' is a superset of 'arch' which # includes the unstable, in testing, packages. Users of the 'x86' architecture # would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages. # '~ppc', '~sparc', '~sparc64' are the unstable KEYWORDS for their respective # platforms. DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST. # IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS. # #ACCEPT_KEYWORDS="~arch" # Portage Directories # =================== # # Each of these settings controls an aspect of portage's storage and file # system usage. If you change any of these, be sure it is available when # you try to use portage. *** DO NOT INCLUDE A TRAILING "/" *** # # PORTAGE_TMPDIR is the location portage will use for compilations and # temporary storage of data. This can get VERY large depending upon # the application being installed. #PORTAGE_TMPDIR="/var/tmp" # # PORTDIR is the location of the portage tree. This is the repository # for all profile information as well as all ebuilds. This directory # itself can reach 200M. WE DO NOT RECOMMEND that you change this. #PORTDIR="/usr/portage" # # DISTDIR is where all of the source code tarballs will be placed for # emerges. The source code is maintained here unless you delete # it. The entire repository of tarballs for gentoo is 9G. This is # considerably more than any user will ever download. 2-3G is # a large DISTDIR. #DISTDIR="${PORTDIR}/distfiles" # # PKGDIR is the location of binary packages that you can have created # with '--buildpkg' or '-b' while emerging a package. This can get # upto several hundred megs, or even a few gigs. #PKGDIR="${PORTDIR}/packages" # # PORTDIR_OVERLAY is a directory where local ebuilds may be stored without # concern that they will be deleted by rsync updates. Default is not # defined. #PORTDIR_OVERLAY="/usr/local/portage" # Fetching files # ============== # # If you need to set a proxy for wget or lukemftp, add the appropriate "export # ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if # all users on your system should use them. # # Portage uses wget by default. Here are some settings for some alternate # downloaders -- note that you need to merge these programs first before they # will be available. # # Lukemftp (BSD ftp): #FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}" #RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}" # # Prozilla (turbo downloader) #FETCHCOMMAND='/usr/bin/proz --no-getch -s ${URI} -P ${DISTDIR}' # Advanced Features # ================= # # MAKEOPTS provides extra options that may be passed to 'make' when a # program is compiled. Presently the only use is for specifying # the number of parallel makes (-j) to perform. The suggested number # for parallel makes is CPUs+1. MAKEOPTS="-j2" # # AUTOCLEAN enables portage to automatically clean out older or overlapping # packages from the system after every successful merge. This is the # same as running 'emerge -c' after every merge. Set with: "yes" or "no". #AUTOCLEAN="yes" # # FEATURES are settings that affect the functionality of portage. Most of # these settings are for developer use, but some are available to non- # developers as well. 'buildpkg' is an always-on setting for the emerge # flag of the same name. It causes binary packages to be created of all # packages that are merged. #FEATURES="sandbox ccache buildpkg" # # RSYNC_RETRIES sets the number of times portage will attempt to retrieve # a current portage tree before it exits with an error. This allows # for a more successful retrieval without user intervention most times. #RSYNC_RETRIES="3" GENTOO_MIRRORS=ftp.snt.utwente.nl/pub/os/linux/gento
-- [EMAIL PROTECTED] mailing list
