* Volker Armin Hemmann <[EMAIL PROTECTED]> [2005-01-12 22:49]:
> wow, you are the first person, where the acpi thermal-module was really
> working, I am talking to.
.~. $ sensors
w83697hf-isa-0290
Adapter: ISA adapter
VCore: +1.62 V (min = +1.71 V, max = +1.89 V)
+3.3V: +3.20 V (min = +3.14 V, max = +3.47 V)
+5V: +5.05 V (min = +4.76 V, max = +5.24 V)
+12V: +11.73 V (min = +10.82 V, max = +13.19 V)
-12V: -11.87 V (min = -13.18 V, max = -10.80 V)
-5V: -5.15 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.46 V (min = +4.76 V, max = +5.24 V)
VBat: +2.62 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 84375 RPM, div = 2)
fan2: 0 RPM (min = 5273 RPM, div = 2)
temp1: +47°C (high = +0°C, hyst = +0°C) sensor = diode
temp2: +53.0°C (high = +80°C, hyst = +75°C) sensor = diode
alarms:
beep_enable:
Sound alarm enabled
.~. $
modprobe w83627hf and temperature from i2c is working fine.., but I have it
from thermal ;-(
--
### Damian Kołkowski (dEiMoS) ## http://kolkowski.no-ip.org/ ###
# echo teb.cv-ba.vxfjbxybx.anvznq | rot13 | rev | sed s/\\./@/ #
--
[email protected] mailing list
