On Sat, 2005-01-15 at 11:24 +0000, Tony Boom wrote: > On Saturday 15 January 2005 10:59, Tony Boom wrote: > > > I've almost given up on getting it to work. > > Not sure if this will help pinpoint my problem, the output from dmsg
try running xawtv from the command line in an xterm and see what errors are given if it segfaults it could be the same error as i have with xawtv, a problem with xv output. if so try xawtv -noxv also i find tvtime is a far better > > It's all Klingon to me. > > bttv: driver version 0.9.15 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > bttv: Bt8xx card found (0). > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 > bttv0: Bt878 (rev 2) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xe4115000 > bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb > bttv0: using: Hauppauge (bt878) [card=10,autodetected] > bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] > bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > bttv0: Hauppauge eeprom: model=61314, tuner=Philips FI1216 MK2 (5), radio=no > bttv0: using tuner=5 > bttv0: i2c: checking for MSP34xx @ 0x80... found > msp34xx: init: chip=MSP3410D-B4 +nicam +simple mode=simple > msp3410: daemon started > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > tvaudio: TV audio decoder + audio/video mux driver > tvaudio: known chips: > tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 > (PV951),ta8874z > bttv0: i2c: checking for TDA9887 @ 0x86... not found > tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] > tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 > [sw] > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: PLL: 28636363 => 35468950 .. ok > > > -- Nick Rout <[EMAIL PROTECTED]> -- [email protected] mailing list
