Just to let everyone know that it's Solved. (Though no one actually replied :(
On Wed, 2005-01-26 at 13:55, Ow Mun Heng wrote:Does anyone on either of this list know how to properly configure LIRC esp on a laptop?
I have a D600, and I've verified that the IRDA works under linux. (using the SIR protocol)
I've tried to make lirc work (under Gentoo) but am unsure why there's no
response.
Just to be sure, IRDA is _not_ started when I start LIRCd.
ls -l /dev/lirc* gets me srw-rw-rw- 1 root root 0 Jan 26 2005 /dev/lircd prw-r--r-- 1 root root 0 Jan 26 2005 /dev/lircm
and also /dev/lirc/0
if I start lircd via
sudo lircd -n -d /dev/lirc/0 on a console and then I start "irw" on another, pressing _any_ buttons on the remote (any remote) doesn't give me any output.
Addition to that, using irrecord also does not work.
Does anyone has any experience in this?? All the stuffs I've seen on the internet involves a home-brewed IR receiver.
Well you could tell us what the problem was and how you solved it, so that future searchers of the archives wouldn't have to ask again :-) .
Holly
-- [email protected] mailing list
