Unfortunately, the drivers don't work with kernel 2.6.10.
On Tue, 22 Feb 2005 12:56:13 -0500, Mike Turcotte <[EMAIL PROTECTED]> wrote: > I know that these drivers do in fact work with Gentoo, as I regularly > use them, except for the built in audio driver which I cannot get to > work with SoundStorm on my nForce2 board. > > Michael Turcotte > Information Systems > City of North Bay > 200 McIntyre St. E > PO Box 360 > North Bay, Ontario > P1B 8H8 > > [EMAIL PROTECTED] > http://www.cityofnorthbay.ca > -----Original Message----- > From: Michael Haan [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 22, 2005 10:52 AM > To: Mike Turcotte > Subject: Re: [gentoo-user] AMD64 with nForce3-250 - Networking Just > *Stopped* Working > > Ok, I was using those drivers a few weeks ago when the box was SuSE > 9.2, but when installing gentoo for some reason, forcedeth was > recommended. I'll switch back and hope that it fixes it. > > On Tue, 22 Feb 2005 09:47:30 -0500, Mike Turcotte > <[EMAIL PROTECTED]> wrote: > > Yes. Download the file of http://www.nvidia.com and run it. It will > have > > to build its own kernel module as Gentoo doesn't come with a > precompiled > > one. Follow the instructions on the site, and you should be good to go > > > > Michael Turcotte > > Information Services > > City of North Bay > > [EMAIL PROTECTED] > > > > -----Original Message----- > > From: Michael Haan [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, February 22, 2005 9:44 AM > > To: Mike Turcotte > > Subject: Re: [gentoo-user] AMD64 with nForce3-250 - Networking Just > > *Stopped* Working > > > > You mean download the nvidia nforce drivers from nvidia? Instead of > > using forcedeth? > > > > On Tue, 22 Feb 2005 08:40:23 -0500, Mike Turcotte > > <[EMAIL PROTECTED]> wrote: > > > Try downloading the Linux platform drivers off their site. > Apparantly > > > they fixed a lot of problems with ACPI > > > > > > -----Original Message----- > > > From: Michael Haan [mailto:[EMAIL PROTECTED] > > > Sent: Monday, February 21, 2005 11:02 PM > > > To: [EMAIL PROTECTED] > > > Subject: [gentoo-user] AMD64 with nForce3-250 - Networking Just > > > *Stopped* Working > > > > > > New install, roughly a week old. Running 2.6.10-rc7 and everything > > > was fine networking wise after initially using "gentoo noapic" off > the > > > cd. Then last night *boom* it just stopped working. I'm getting > > > "netconsole: not configured. aborting". I've tried adding "noapic > > > pci=noacpi" in grub.conf to no avail. Has anyone seen this? > > > -- > > > [email protected] mailing list > > > > > > > > > -- [email protected] mailing list
