Yep i have problem with that card, which i had bought yesterday. Everything pluged in pci and.. Im putting modules in modprobe bttv card=34 tuner=38 <-- everythings fine, no errors, but lspci shows:
VIDEO:
0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: LeadTek Research Inc. WinFast TV 2000
AUDIO:
0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Subsystem: LeadTek Research Inc.: Unknown device 6606
Unknown Device?
Ok, next thing ive done was setup tvtime. tvtime-scanner -n PAL <-- it finds
hardly 20 channels, while on TV (and windoze;p) i have ~70 :o(. Although, the
picture is nasty - lines on display ( this is not related to antena-cable - i
had double checked it, and it works on my brothers OS ). I think tvtime is
setuped well - i chosen CUSTOM frequency table, change standard to PAL (im
living in Poland and my cable tv works on PAL B/G afaik).
But this is nothin... The worst thing is that there is no f.. sound :( only
noise. I connected the cable properly (AUX_IN). Alsa is setuped great
althought. So it must be related to the driver smth.
I will page dmesg and lsmod maybe itll be helpful.
dmesg:
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 18, latency: 32, mmio: 0xfb002000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is
107d:6606
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003ff500 [init]
bttv0: using tuner=38
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
... anda Lsmod:
Module Size Used by
it87 23772 0
eeprom 5776 0
i2c_sensor 2944 2 it87,eeprom
i2c_isa 1728 0
i2c_viapro 6480 0
rtc 10744 0
evdev 7488 0
tuner 20452 0
tda9887 12440 0
bttv 143760 0
video_buf 17156 1 bttv
firmware_class 7808 1 bttv
i2c_algo_bit 8328 1 bttv
v4l2_common 4736 1 bttv
btcx_risc 3848 1 bttv
tveeprom 11416 1 bttv
i2c_core 18384 10
it87,eeprom,i2c_sensor,i2c_isa,i2c_viapro,tuner,tda9887,bttv,i2c_algo_bit,tveeprom
videodev 7552 1 bttv
uhci_hcd 29072 0
usb_storage 28928 0
usbhid 31368 0
usbcore 104952 4 uhci_hcd,usb_storage,usbhid
nvidia 3463868 12
So what am i doin wrong?
Thanks in advance!:)
--
pozdrawiam
p|OtrEk lys3kkk*o2.pl
gg# 0x3e8f7c
Key: http://pgp.mit.edu:11371/pks/lookup?search=0x66A8B632&op=index
pgpCeuDGIcKng.pgp
Description: PGP signature
