I've made some changes, but this time I got a different error message.
The message told me that no screens were found...
Here is a copy of my Xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS"
HorizSync "68.7"
VertRefresh "85"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 MX/MX 400]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Depth 24
Modes "1024x768"
Viewport 0 0
EndSubSection
EndSection
SubSection "Display"
On Apr 3, 2005 5:01 AM, Nick Rout <[EMAIL PROTECTED]> wrote:
> You really need to look at /var/log/Xorg.0.log
>
> Quite likely your minitor is not being correctly probed by xorg, which
> therefore defaults to a low resolution.
>
> If that is the problem then you need to add HorizSync and VertRefresh
> lines into your configuration file in the monitor section. Here is mine
> as an example:
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> Option "DPMS"
> HorizSync 35-85
> VertRefresh 48-120
> EndSection
>
> I have had surprisingly good luck finding rates for crappy monitors by
> googling.
>
> On Sat, 2005-04-02 at 23:51 +0000, Shawn Singh wrote:
> > My screen resolution is set at 640 x 480...and (as you might
> > understand) I'd like to change it.
> >
> > I've used the docs provided at:
> >
> > http://www.gentoo.org/doc/en/xorg-config.xml?style=printable
> >
> > As my guide but nothing has changed.
> >
> > This is a copy of my xorg.conf:
> >
> > Section "ServerLayout"
> > Identifier "X.org Configured"
> > Screen 0 "Screen0" 0 0
> > InputDevice "Mouse0" "CorePointer"
> > InputDevice "Keyboard0" "CoreKeyboard"
> > EndSection
> >
> > Section "Files"
> > RgbPath "/usr/lib/X11/rgb"
> > ModulePath "/usr/lib/modules"
> > FontPath "/usr/share/fonts/misc/"
> > FontPath "/usr/share/fonts/TTF/"
> > FontPath "/usr/share/fonts/Type1/"
> > FontPath "/usr/share/fonts/CID/"
> > FontPath "/usr/share/fonts/75dpi/"
> > FontPath "/usr/share/fonts/100dpi/"
> > EndSection
> >
> > Section "Module"
> > Load "record"
> > Load "extmod"
> > Load "record"
> > Load "extmod"
> > Load "dbe"
> > Load "dri"
> > Load "glx"
> > Load "xtrap"
> > Load "freetype"
> > Load "type1"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Keyboard0"
> > Driver "kbd"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Mouse0"
> > Driver "mouse"
> > Option "Protocol" "auto"
> > Option "Device" "/dev/mouse"
> > EndSection Option "Device" "/dev/mouse"
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor0"
> > VendorName "Monitor Vendor"
> > ModelName "Monitor Model"
> > EndSection
> >
> > Section "Device"
> > ### Available Driver options are:-
> > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> > ### [arg]: arg optional
> > #Option "SWcursor" # [<bool>]
> > #Option "HWcursor" # [<bool>]
> > #Option "NoAccel" # [<bool>]
> > #Option "ShadowFB" # [<bool>]
> > #Option "UseFBDev" # [<bool>]
> > #Option "Rotate" # [<str>]
> > #Option "VideoKey" # <i>
> > #Option "Rotate" # [<str>]
> > #Option "VideoKey" # <i>
> > #Option "FlatPanel" # [<bool>]
> > #Option "FPDither" # [<bool>]
> > #Option "CrtcNumber" # <i>
> > #Option "FPScale" # [<bool>]
> > #Option "FPTweak" # <i>
> > Identifier "Card0"
> > Driver "nv"
> > VendorName "nVidia Corporation"
> > BoardName "NV11 [GeForce2 MX/MX 400]"
> > BusID "PCI:1:0:0"
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen0"
> > Device "Card0"
> > Monitor "Monitor0"
> > DefaultDepth 24
> > SubSection "Display"
> > Viewport 0 0
> > SubSection "Display"
> > Viewport 0 0
> > Depth 1
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 4
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 8
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 15
> > EndSubSection
> > SubSection "Display"
> > Viewport 0 0
> > Depth 16
> > EndSubSection
> > SubSection "Display"
> > EndSubSection
> > SubSection "Display"
> > Depth 24
> > Modes "1024x768"
> > Viewport 0 0
> > EndSubSection
> > EndSection
> >
> > I'm running GNOME (if that makes any difference)...
> >
> > Thank you,
> >
> > Shawn Singh
> > --
> > gentoo-user@gentoo.org mailing list
> >
> --
> Nick Rout <[EMAIL PROTECTED]>
>
> --
> gentoo-user@gentoo.org mailing list
>
>
--
gentoo-user@gentoo.org mailing list
