More info. Reverting to my 2.6.9 kernel, these are the messages I
get. They seem to mirror 2.6.11, I inserted the "<FREEZE>" where
2.6.11 stops and seems to wait:
hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
Apr 24 14:29:24 tibeaux kernel: hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI
CD/DVD-ROM drive
Apr 24 14:29:24 tibeaux kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 24 14:29:24 tibeaux kernel: hda: max request size: 128KiB
Apr 24 14:29:24 tibeaux kernel: hda: 20066251 sectors (10273 MB)
w/1902KiB Cache, CHS=19906/16/63, UDMA(100)
Apr 24 14:29:24 tibeaux kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Apr 24 14:29:24 tibeaux kernel: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW
drive, 2048kB Cache, UDMA(33)
Apr 24 14:29:24 tibeaux kernel: Uniform CD-ROM driver Revision: 3.20
Apr 24 14:29:24 tibeaux kernel: 3ware Storage Controller device driver
for Linux v1.26.00.039.
Apr 24 14:29:24 tibeaux kernel: 3w-xxxx: No cards found.
Apr 24 14:29:24 tibeaux kernel: ata1: SATA max UDMA/133 cmd 0x9E0 ctl
0xBE2 bmdma 0xCC00 irq 5
Apr 24 14:29:24 tibeaux kernel: ata2: SATA max UDMA/133 cmd 0x960 ctl
0xB62 bmdma 0xCC08 irq 5
Apr 24 14:29:24 tibeaux kernel: ata1: dev 0 ATA, max UDMA/133,
490234752 sectors: lba48
<FREEZE>
Apr 24 14:29:24 tibeaux kernel: ata1: dev 0 configured for UDMA/133
Apr 24 14:29:24 tibeaux kernel: scsi0 : sata_nv
Apr 24 14:29:24 tibeaux kernel: ata2: no device found (phy stat 00000000)
Apr 24 14:29:24 tibeaux kernel: scsi1 : sata_nv
Apr 24 14:29:24 tibeaux kernel: Vendor: ATA Model: Maxtor
6Y250M0 Rev: YAR5
Apr 24 14:29:24 tibeaux kernel: Type: Direct-Access
ANSI SCSI revision: 05
Apr 24 14:29:24 tibeaux kernel: ata3: SATA max UDMA/133 cmd 0x9F0 ctl
0xBF2 bmdma 0xE400 irq 11
--
[email protected] mailing list
