On Sunday 22 May 2005 00:54, askar ... wrote: > On 5/21/05, Jason Stubbs <[EMAIL PROTECTED]> wrote: > > On Saturday 21 May 2005 17:36, askar ... wrote: > > > In the kernel I enables option for 'CardBus yenta-compatible' - this > > > seems the one I was looking for. After recompilation the kernel I > > > rebooted the system. > > > 3 lamps of the PCMCIA card was on: 1) Power 2) Act and 2) Link > > > The pcmcia card I use is Planex ENW-3503-TX. This is the 10Base-T card. > > > The cardbus seems working - lights of power and act are on. When I > > > connect LAN cable the light for Link also switches on. > > > In /etc/conf.d/net I set IP address for eth0. > > > When I did # /etc/init.d/net.eth0 start, it complains 'no such device > > > ...unknown interface'. I think the driver need to be installed. In the > > > kernel settings I don't see the driver for Planex ENW-3503-TX. > > > Could anybody help me? > > > > Google can. ;) > > > > Searching for "Planex ENW-3503-TX linux" gave a list of card types and > > what chipsets they contain on the first result. > > Thanks. But when I searched with the above keyword, the search results in 2 > pages, and all sites in japanese...
I noticed that. I figured you'd probably be able to read seeing I thought
Planex was a domestic-only brand. Luckily I can read Japanese. ;)
> > Your card has a "Winbond W89C926". I then searched for "Winbond W89C926
> > linux" and got mostly similar results to the first search, but there was
> > one that indicates that the card is NE2000 compatible. One of the PCMCIA
> > network drivers in the kernel is "NE2000 compatible PCMCIA support", so
> > I'd suggest you give that one a try.
>
> I use gentoo 2005.0, kernel 2.6.11. In my kernel I have only NE2100 in:
> Device drivers->Networking support->Network device support->Ethernet (10 or
> 100Mb)-->AMD Lance and PCnet (AT1500 and NE2100) support.
> Is this the right place?
Device Drivers --->
Networking support --->
PCMCIA network device support --->
NE2000 compatible PCMCIA support
> One question more - usually we can know about connected devices with
> command lspci. But in the result from lspci no information about my
> pcmcia-card.
As far as I know, lspci only shows you what's on the PCI bus. PCMCIA is a
different bus which is generally connected to the PCI bus.
Regards,
Jason Stubbs
pgpPLvBgsOzb4.pgp
Description: PGP signature
