On 6/2/05, askar ... <[EMAIL PROTECTED]> wrote:
> On 6/2/05, Rafael Dantas de Castro <[EMAIL PROTECTED]> wrote:
> > You actually switched the files of the PC's. The "--listen " arg
> > should have the IP of the LOCAL PC, the one you'll listen IN, not the
> > one you'll listen FROM. That's why you get the errors, you're trying
> > to bind to an IP that's not the IP fo the local machine. Switch the
> > files and it should work.
> Thanks. I changed as you told.
> But how about my /etc/distcc/hosts file? Is it ok?
It's similar to mine, except I didn't put localhost in... don't know
if that's a problem
>
> > On a side note, I'd increase the "-j2" MAKEOPTS, to something like 5.
> > If I'm not mistaken, that's what I use at home, on a similar config,
> > based on what the HOWTO advised...
> For N in -jN, in guide written:
> (Set N to a suitable number for your particular setup)
> (A common heuristic strategy is twice the number of total CPUs + 1)
>
> Is this concerning on 1 PC? If so, I have 1 cpu and N = 2* (1+1)=4, not 5...
What I understood was:
(Twice Total Number of CPUs) + 1 (all PC's involved)
which would round up to:
(2 * 2) + 1 = 5
but I could be wrong.
>
> And one more thing:
> After I changed /etc/conf.d/distccd file, I did:
> #/etc/init.d/distcc start I receive a error:
>
> * Stopping distccd...
> [ ok ]
> * Starting distccd...
> [ ok ]
> distccd[17461] (dcc_setup_real_log) ERROR: failed to open --allow:
> Permission denied
I don't really know what could cause that... nothing on the distcc docs?
>
> askar
>
> --
> [email protected] mailing list
>
>
--
Rafael Dantas de Castro
Engenharia de Computa��o 2001 - Unicamp
- Laborat�rio de Criptografia Aplicada
"Se procurar bem voc� acaba encontrando.
N�o a explica��o (duvidosa) da vida,
Mas a poesia (inexplic�vel) da vida."
Carlos Drummond de Andrade
--
[email protected] mailing list
