> Jamie. we seem to be following each other around the mailing lists. CLUG, > mythtv, now here.
True, and I always appreciate the help you offer :-) > You seem to have all the modules loaded, what is not working? I cannot tune in to any channels > is there a /dev/video/video0? Yes: [EMAIL PROTECTED] ~ $ ls -lah /dev/video0 lrwxrwxrwx 1 root root 10 Jul 19 14:00 /dev/video0 -> v4l/video0 [EMAIL PROTECTED] ~ $ ls /dev/v4l/video0 -lah crw-rw---- 1 root video 81, 0 Jul 19 14:00 /dev/v4l/video0 [EMAIL PROTECTED] ~ $ (the permissions on /dev/v4l/video0 don't look right to me and I do get an error that /dev/video0 is not accessible when trying to run xawtv as any user other than root) > does xawtv -c /dev/video/video0 give any output? I will try this later tonight when I get home. > > On Tue, 19 Jul 2005 14:20:48 +1200 (NZST) > Jamie Dobbs wrote: > >> I've been working on this for several days but do not seem to make any >> progress. >> I have a Pinnacle PCTV Stereo card which is based on the Philips saa7134 >> chip. I have recomipled my kernel (2.6.12-gentoo-r6) to include the >> saa7134 module and i2c support as a module. >> >> lsmod output : >> >> Module Size Used by >> tda9887 13144 0 >> saa7134 102996 0 >> tuner 26920 0 >> video_buf 17924 1 saa7134 >> v4l2_common 5184 1 saa7134 >> v4l1_compat 14084 1 saa7134 >> ir_common 6660 1 saa7134 >> videodev 7808 1 saa7134 >> >> Relevant entries added to my /etc/modules.conf after modules-update is >> run: >> (I am in New Zealand and know that card number and tuner number are >> correct as I have had this card working in Mandrake 10.1 a week or so >> ago) >> >> ### modules-update: start processing /etc/modules.d/saa7134 >> options saa7134 card=26 tuner=5 oss=1 >> >> ### modules-update: end processing /etc/modules.d/saa7134 >> >> ### modules-update: start processing /etc/modules.d/tda9887 >> options tda9887 qss=0 >> >> ### modules-update: end processing /etc/modules.d/tda9887 >> >> My Kernel .config file can be found at >> http://drgnfire.orcon.net.nz/kernel_config >> >> I'd appreciate any feedback on what I might be doing wrong that is >> causing >> the TV Card not to work. >> >> Once I have the card working my aim is to build a MythTV box using this >> card, so any pointers on this would also be appreciated (especially from >> anyone in New Zealand who has experience in this area). >> >> Thanks >> >> Jamie >> >> >> -- >> [email protected] mailing list > > -- > Nick Rout > > -- > [email protected] mailing list > > > > -- [email protected] mailing list
