Xavier Parizet <x...@gentooist.com> [10-05-12 01:10]:
> On 05/11/2010 08:36 PM, meino.cra...@gmx.de wrote:
> > Xavier Parizet <x...@gentooist.com> [10-05-11 19:48]:
> >> On 05/11/2010 06:42 PM, meino.cra...@gmx.de wrote:
> >>> Hi,
> >>>
> >>> when playing dvds the movie gets stopped from time to time
> >>> and restarts itsself after a short oeriod of idle some frames
> >>> after the position where it halted.
> >>>
> >>> I took a look into the log file and found this:
> >>>
> [SNIP]
> > 00:0f.1 IDE interface: VIA Technologies, Inc. 
> > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> >         Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
> >         Kernel driver in use: VIA_IDE
> 
> HERE ! You use VIA_IDE which is very old driver from:
> Device Drivers > ATA/ATAPI/MFM/RLL support (DEPRECATED)
> (Notice the big (DEPRECATED)).
> 
> You should use PATA_VIA from
> Device Drivers -->
>   <*>Serial ATA and Parallel ATA drivers -->
>     <*> VIA PATA support
> 
> and uncheck
> Device Drivers --->
>   < > ATA/ATAPI/MFM/RLL support (DEPRECATED)
> 
> using kernel menuconfig. Then compile and reboot to your newly compiled
> kernel and now your dvd drive should be seen as /dev/sr0.
> 
> > 
> > Fingers crossed, that is software-fixable ;)
> > 
> > Thanks a lot for your help!
> > 
> > Best regards,
> > mcc
> 
> -- 
>       Xavier Parizet
> YaGB :   http://gentooist.com
> GPG  :    C7DC B10E FC21 63BE
> B453 D239 F6E6 DF65 1569 91BF
> 

I reconfigured the kernel and lspci now gives me this:
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
        Subsystem: ASUSTeK Computer Inc. A8V Deluxe
        Kernel driver in use: agpgart-amd64
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 
South]
00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit 
Ethernet Controller (rev 13)
        Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet 
Controller (Asus)
        Kernel driver in use: skge
00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture 
(rev 11)
        Subsystem: Avermedia Technologies Inc AverMedia AVerTV DVB-T 771
        Kernel driver in use: bttv
        Kernel modules: bttv
00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 
11)
        Subsystem: Avermedia Technologies Inc AverMedia AVerTV DVB-T 771
        Kernel driver in use: bt878
        Kernel modules: bt878
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID 
Controller (rev 80)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe 
motherboard
        Kernel driver in use: sata_via
00:0f.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel driver in use: pata_via
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 81)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge 
[KT600/K8T800/K8T890 South]
        Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
        Kernel modules: i2c-viapro
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 
AC97 Audio Controller (rev 60)
        Subsystem: ASUSTeK Computer Inc. A8V Deluxe motherboard (Realtek ALC850 
codec)
        Kernel driver in use: VIA 82xx Audio
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller 
(rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address 
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
        Kernel driver in use: k8temp
        Kernel modules: k8temp
01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GT] 
(rev a2)
        Subsystem: Micro-Star International Co., Ltd. Device 0640
        Kernel driver in use: nvidia
        Kernel modules: nvidia


Since the IDE-interface is listed, I think the configuration is ok so
far...
But: There is no /dev/sr* and accordingly k3b does not find any burner
device (which is identical to the dvd-player device in my case...)

Rest of gentoo is up to date...

Where can I tweak more?

best regards,
mcc




-- 
Please don't send me any Word- or Powerpoint-Attachments
unless it's absolutely neccessary. - Send simply Text.
See http://www.gnu.org/philosophy/no-word-attachments.html
In a world without fences and walls nobody needs gates and windows.


Reply via email to