Am 28.07.2010 15:45, schrieb Bill Longman: > On 07/28/2010 01:50 AM, KH wrote: >> >> Hi, >> >> I installed grub by connecting the hdd to my workstation. This did not >> change anything. >> Also I changed /etc/fstab . Now I have 0 0 for every partition. The pc >> boots fine now. I can use it but ... There is no /dev/hd* . Running >> mount /boot I get the answer /dev/hda1 does not exist. Also there is no >> /dev/sd* >> >> Any ideas? > > Konstantin, please post what your kernel has for IDE support. If you > have /proc/config.gz, then please post the results from "zgrep IDE > /proc/config.gz" so we can get an idea of why you have no /dev/hd* > devices. We will also need to know what kind of disk controller your > server really has. Are they IDE or SATA controllers? >
Hi Bill, Now I am running 2.6.30-r8 but 2.6.34-r1 is ready but not jet copied to /boot. btw it is a p3 coppermine. This is the output from zgrep IDE /proc/config.gz . CONFIG_HAVE_IDE=y CONFIG_IDE=y # Please see Documentation/ide/ide.txt for help/info on IDE drives CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEDMA_SFF=y # PCI IDE chipsets support CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_PCIBUS_ORDER=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_VIDEO_DEV is not set # CONFIG_VIDEO_MEDIA is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB_TRIDENT is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set I just tried /etc/init.de/udev resart . I am getting errors not to use the script with baselayout-1 . The box is very slow now. Will reboot and see what baselayout is on it. Regards kh
