James Wall <wallservi...@gmail.com> [10-10-16 16:23]: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 10/16/2010 01:59 AM, meino.cra...@gmx.de wrote: > > > > Hi, > > > > I want to record DVB-T broadcast with my (already working) DVB-T card. > > Since there are only a couple of broadcasts which should be recorded > > I have no problems with editing crontabs to acchieve, what I want :) > > > > What should work is: > > 1) The PC should wake up from suspend-to-ram or (better!) > > suspend-to-disk state (suspend-to-* works both already). > > 2) Therefore it must be possible to store the wake-up time > > somewhere. > > 3) The DVBT-card should be set to the correct channel and > > it is sufficient to store the whole *.ts-stram to disk > > for later processing. > > > > My PC is a desktop PC with the following hardware (as reported > > by lspci): > > > > 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single > > slot PCI-e GFX Hydra part (rev 02) > > 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > > express gpp port B) > > 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > > express gpp port D) > > 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > > express gpp port E) > > 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > > express gpp port F) > > 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI > > express gpp port G) > > 00:0d.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external > > gfx1 port B) > > 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller > > [IDE mode] (rev 40) > > 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 > > Controller > > 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller > > 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 > > Controller > > 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller > > 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) > > 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev > > 40) > > 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) > > 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller > > (rev 40) > > 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) > > 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 > > Controller > > 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 > > Controller > > 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor > > HyperTransport Configuration > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor > > Address Map > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM > > Controller > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor > > Miscellaneous Control > > 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link > > Control > > 01:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video > > Capture (rev 11) > > 01:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture > > (rev 11) > > 02:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI > > Express-to-PCI Bridge (rev 03) > > 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 > > UART) function 0 (Uart) > > 03:00.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) > > function 1 (8bit bus) > > 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller > > (rev 03) > > 05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8059 PCI-E > > Gigabit Ethernet Controller (rev 11) > > 06:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire > > Controller > > 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA > > Controller (rev 03) > > 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA > > Controller (rev 03) > > 08:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] > > (rev a1) > > > > > > I am using a recent gentoo with vanilla kernel 2.6.35.7. > > > > Thank you very much in advance for any help! > > > > Best regards and have a nice weekend! :) > > mcc > > > > > To get the computer to come out of the suspended states, you need to > look for an option in the BIOS to automatically start your PC, typically > called RTC Alarm or similar. Your cron jobs will be able to take over at > that point. > > HTH, James > > - -- > No trees were harmed in the sending of this message. However, a large > number of electrons were terribly inconvenienced. > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v2.0.16 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ > > iQEcBAEBAgAGBQJMuaRLAAoJEISPTA/exVD8Z40H/iGK1Mtz9eg47XiMxfCMshO2 > j9s/ULrVI3KKvDr9ygOu/mGApv9pKENgiAz3X1HTSQpT42A/UmrWCHkkUl2JV1Lh > iCxGzzcbqnuysbiJjKPTbdoqRf0Z5EZWhGXwxtGzMpgD/c98GrJTzOra9e2MK3Yx > t0JBUHy8eBfDMdVGs6Ae0ygkzvhRlAeBtb9cVwT9MTEU+IgpedKhEZnypZjs74By > QsLZ2N8ZMv8f2nq71FvdU8U3QjxUjwXfCFfNDXcQhrkHNyHoVAOBhbgB38qMc+Vj > CVHtfyWZs4SF7CiKrgGmvMQVi0prrHve6ebg0i/S/7pwy79ZDLUIWHtoHzpWILo= > =DR/y > -----END PGP SIGNATURE----- >
Ok, so far so nice. I managed to set the alarm time correctly, to activate the RTC-alarm in the BIOS, and "wake up" my PC: It means: The fans woke up, the harddisc start spinning, ... but no output to screen and (I could not remember, since there was a call on the phone at that moment) there was no POST "beep" from the BIOS. Am I lost? Best regards, mcc