ifconfig -a is
eth0 Link encap:Ethernet HWaddr 00:26:2d:97:8b:85
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr f0:7b:cb:16:52:ec
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
ifconfig wlan0 up
wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
ifconfig wlan0 192.168.1.99
and can ping 192.168.1.1
but cann't ping www.g.cn
Network is unreachable(101)
i have edit /etc/resolv.conf
nameserver 192.168.1.1
2011/1/14 doherty pete <[email protected]>
>
> i donn't known what different form wext and madwifi....
> i just known my wireless is bcm4357...
>
> 2011/1/14 Vortex 3 <[email protected]>
>
>> Pete,
>>
>>
>>> wpa_supplicant_wlan0="-Dmadwifi"
>>>
>>
>> From your previous message, your are using the "madwifi" driver. However,
>> you are executing
>>
>>
>> wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant/wpa_supplicant.conf
>>>
>>
>> Where now you specify the "wext" driver. Maybe that's the problem (?)
>>
>
>
>
> --
> pete_doherty
>
--
pete_doherty
