Hello, New day, and a fresh approach to fixing the raid one install. Following this doc (no lvm no intramfs): http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml
The disk were all resync'd (end of last thread). Since this is a simple 3 partition 2 disk mirror (identical drives & formatting) and I want to mirror all three (/boot, /, swap) I used these commands: mdadm --create /dev/md127 --level=1 --raid-devices=2 --metadata=0.90 /dev/sda1 /dev/sdb1 mdadm --create /dev/md125 --level=1 --raid-devices=2 --metadata=0.90 /dev/sda3 /dev/sdb3 mdadm --create /dev/md126 --level=1 --raid-devices=2 --metadata=0.90 /dev/sda2 /dev/sdb2 So do I need to issue these commands? If so, are they correct? A little unclear on mknod.... livecd ~ # mknod /dev/md127 b 9 1 livecd ~ # mknod /dev/md125 b 9 3 or livecd ~ # mknod /dev/md127 b 9 127 livecd ~ # mknod /dev/md125 b 9 125 livecd ~ # mknod /dev/md126 b 9 126 ???
